SINGLE PILOT CHECK VALVE
€28.70
(tax excl.)
€34.73
(tax incl.)
SOLENOID VALVES
Subcategories
€155.00
(tax excl.)
€187.55
(tax incl.)
A 6-way diverter solenoid valve is a valve that controls the flow of a fluid in six different directions. It is used to divert fluid from one line to another, or to combine fluid from two or more lines.
6-way diverter...
€44.75
(tax excl.)
€54.15
(tax incl.)
The NG-6 side outlet base plate in hydraulic systems serves as a support and connection for one or more NG-6 solenoid valves. The fluid inlet and outlet of the solenoid valves is located laterally. Definition: Made of...
€49.20
(tax excl.)
€59.53
(tax incl.)
The NG-6 bottom outlet base plate serves as a support and connection for one or more NG-6 solenoid valves. On this type of plate, the fluid inlet and outlet connections of the solenoid valves are located on the...
€34.69
(tax excl.)
€41.97
(tax incl.)
An NG-6 blanking plate is used in hydraulic systems, specifically in NG-6 valve blocks. It is press-fitted into one of the cavities of an NG-6 block to seal a hydraulic port or passage. The O-rings are compressed,...
€49.01
(tax excl.)
€59.30
(tax incl.)
An NG-10 blanking plate is a component used to close or seal an NG-10 (CETOP 5) port or connection in a hydraulic system. It prevents hydraulic fluid leaks and protects the port from contamination. Common...
€1.00
(tax excl.)
€1.21
(tax incl.)
A DIN-43650-B T-22 coil connector is an industrial electrical connector, primarily designed to securely and reliably connect a power or control source to a coil of an electromechanical device. The T-22 designation...
€1.00
(tax excl.)
€1.21
(tax incl.)
A DIN-43650-A T-30 coil connector is an industrial electrical connector designed to establish a safe and reliable connection between a power or control source and a coil of an electromechanical device. The T-30...
€37.84
(tax excl.)
€45.79
(tax incl.)
The T-22 DIN 43650-B analog timer is a programmable device for use with elements that have a DIN 43650 B type connection. It is applied with solenoid valves for draining compressor tanks such as air transport lines,...
€1.00
(tax excl.)
€1.21
(tax incl.)
A DIN-43650-C T-15 coil connector is used to connect the power supply to the coil of a solenoid valve, allowing its activation and control. Applications: Industrial automation, Packaging, Material processing and...
€37.84
(tax excl.)
€45.79
(tax incl.)
The T-30 analog timer is an electromechanical device used to switch an electrical circuit on or off after a preset time. Similar to the T-22 DIN 43650-B but with some differences, it is used to control processes that...
€47.00
(tax excl.)
€56.87
(tax incl.)
The T-30 electronic timer is a programmable device for use with components that have a DIN 43650 A or B connection. It features a manual or "test" button, as well as selectors for setting the desired operating or stop...
€14.07
(tax excl.)
€17.02
(tax incl.)
A 2/2 N.cerrada solenoid valve, 1/8" AL01, is a pneumatic component used in industrial automation systems to control the flow of compressed air. Its function is to open or close a 1/8" air line in response to an...
€21.72
(tax excl.)
€26.28
(tax incl.)
A 2/2 N.abierta solenoid valve, 1/8" AN01, is a pneumatic component used in industrial automation systems to control the flow of compressed air. Its function is to open or close a 1/8" diameter air passage when it...
€22.00
(tax excl.)
€26.62
(tax incl.)
A 2/2 N.abierta linear-stroke solenoid valve AN11 is a pneumatic component used in industrial automation systems to control the flow of compressed air. The valve has two ports (inlet and outlet) and two positions...
€23.11
(tax excl.)
€27.96
(tax incl.)
The AL02 1/4" 2/2 N.cerrada solenoid valve is used to control the flow of compressed air, allowing or blocking its passage through a 1/4" diameter conduit. The valve has two ports (inlet and outlet) and two positions...
€35.15
(tax excl.)
€42.53
(tax incl.)
A 2/2 N.abierta solenoid valve, 1/4" AN20, is used to control the flow of compressed air, allowing or blocking its passage through a 1/4" diameter conduit. The valve has two ports (inlet and outlet) and two positions...
€20.90
(tax excl.)
€25.29
(tax incl.)
The AC01 3/2 N. normally closed 1/8" solenoid valve is used to control the flow of compressed air in industrial automation systems. It offers a third position that allows a specific port to be connected or...
€20.90
(tax excl.)
€25.29
(tax incl.)
The AC09 3/2 N. open solenoid valve (1/8") allows you to control the flow of compressed air by permitting or blocking its passage through three ports, one of which has a 1/8" diameter. The valve has 3 ports and 2...
€30.99
(tax excl.)
€37.50
(tax incl.)
3/2 N. closed solenoid valve 1/4" AC02 Technical specifications: Direct acting solenoid valve 1/4". Differential pressure is not required for its proper functioning. Mounting position is irrelevant. It is possible to...
€30.99
(tax excl.)
€37.50
(tax incl.)
The AC02 3/2 N. open solenoid valve (1/4") allows you to control the flow of compressed air, permitting or blocking its passage through three ports, one of which is 1/4" in diameter. It has 3 ports and 2 positions....
€32.20
(tax excl.)
€38.96
(tax incl.)
A 3/2 N.cerrada 1/8" stainless steel direct-acting solenoid valve is used to control the flow of a fluid (usually compressed air) in pneumatic systems. It has 3 ports and 2 positions. The movement of the piston that...
€64.00
(tax excl.)
€77.44
(tax incl.)
A 3/2 N. normally closed 1/4" stainless steel direct drive solenoid valve is an electromagnetic valve designed to control the flow of a fluid (typically compressed air) in low flow pneumatic or hydraulic systems....
€5.60
(tax excl.)
€6.78
(tax incl.)
The T22 coil is installed in 1/4" and 1/2" solenoid valves. It is a fundamental component in the operation of a solenoid valve. It is responsible for transforming electrical energy into magnetic energy, generating a...
€40.00
(tax excl.)
€48.40
(tax incl.)
A 4/2 parallel crossover NG-6 solenoid valve precisely controls the flow of pressurized oil. It has four ports and two positions (open and closed). Applications: Hydraulic circuits, Machine tools, Pressing systems,...
€40.00
(tax excl.)
€48.40
(tax incl.)
An NG-6 4/2 H-type crossover solenoid valve is used to precisely control the flow of pressurized oil. It has four ports and two positions: open and closed. The H-type crossover configuration, along with the valve's...
€47.00
(tax excl.)
€56.87
(tax incl.)
The NG-6 4/3 closed-center solenoid valve precisely controls the flow of pressurized oil. It has four ports and three possible positions. In the center position, all ports are isolated, preventing fluid flow. It is...
€47.00
(tax excl.)
€56.87
(tax incl.)
An ABT NG-6 4/3 center-mounted solenoid valve precisely controls the flow of pressurized oil. It has four ports and three positions. In the center position, ports A, B, and T are connected, enabling specific...
€49.00
(tax excl.)
€59.29
(tax incl.)
The NG-6 4/3 PT center solenoid valve is used to precisely control the flow of pressurized oil. It has four ports and three possible positions. In the center position, ports P and T are connected, while ports A and B...
€47.00
(tax excl.)
€56.87
(tax incl.)
An NG-6 4/3 center-h solenoid valve is used to precisely control the flow of pressurized oil. It is designed to operate in demanding industrial environments and withstand high pressures. It has four ports and three...
€23.22
(tax excl.)
€28.10
(tax incl.)
The NG-6 solenoid valve coil is located inside an NG-6 hydraulic solenoid valve. Its function is to convert electrical energy into magnetic energy to actuate an internal mechanism and, in this way, control the flow of...
€34.97
(tax excl.)
€42.31
(tax incl.)
The NG-10 solenoid valve coil is used to operate the spool of a NG-10 hydraulic solenoid valve.
Common Applications: Heavy Industrial Machinery, Construction and Mining Equipment, High Power Hydraulic Systems,...
€75.03
(tax excl.)
€90.79
(tax incl.)
A lateral NG-10 base plate serves as a mounting and connection interface for solenoid valves and other NG-10 (CETOP 5) sized hydraulic components. Connection ports for hydraulic lines are located on the sides of the...
€82.00
(tax excl.)
€99.22
(tax incl.)
A lower NG-10 base plate serves as a mounting and connection point for solenoid valves and other hydraulic components that comply with the NG-10 (CETOP 5) standard. Connection ports for hydraulic lines are located on...
€281.40
(tax excl.)
€340.49
(tax incl.)
An NG-6 block with a vent and pressure relief valve is a modular component designed to efficiently and safely integrate multiple NG-6 solenoid valves into a hydraulic system. The vent valve allows for controlled...
€32.14
(tax excl.)
€38.89
(tax incl.)
2/2 NC solenoid valve with assisted control.
It needs a differential pressure for proper operation.
Horizontal preferred mounting position
It is possible to change the coil without having to dismantle the valve....
€7.51
(tax excl.)
€9.09
(tax incl.)
A solenoid valve coil C1 is a fundamental electromechanical component in pneumatic and hydraulic systems. It enables the flow of a fluid (air, oil, water, etc.) to be activated or deactivated through a valve,...
€39.65
(tax excl.)
€47.98
(tax incl.)
Assisted control solenoid valve, it requires a differential pressure for its correct operation.
Preferable mounting position horizontal fluid passage
It is possible to change the coil without having to dismantle the...
€6.00
(tax excl.)
€7.26
(tax incl.)
The DIN-43650-A LED T-30 Connector is an electrical component designed for the fast and safe connection of cables in industrial and commercial applications.
Applications: Machine control systems, outdoor lighting,...
€4.14
(tax excl.)
€5.01
(tax incl.)
A T-22 AC/DC LED Connector is used to connect and power LED circuits. It is compatible with both alternating and direct current. It is used in a wide variety of applications including industrial lighting, signage,...
€8.80
(tax excl.)
€10.65
(tax incl.)
A C3 8W solenoid coil is the essential electromagnetic component that activates a solenoid valve mechanism, allowing or stopping the flow of fluid (liquid or gas) in a system. 8W indicates the power consumption....
€4.14
(tax excl.)
€5.01
(tax incl.)
A DIN-43650-C T-15 LED Connector establishes a safe and reliable connection between a power or control source and a coil of an electromechanical device, such as a solenoid valve. It incorporates an indicator LED that...
€12.00
(tax excl.)
€14.52
(tax incl.)
A Ø10 solenoid valve coil is used to operate a solenoid valve in industrial cleaning systems, mainly in dust collectors with bag filters or cartridges. It generates a magnetic field when energized that opens or closes...
€40.25
(tax excl.)
€48.70
(tax incl.)
A bag filter blow solenoid valve is an electromechanical device used in compressed air cleaning systems for bag filters. Applications: Industrial bag filters, Emission control systems, Cement plants, mining, steel,...
€31.42
(tax excl.)
€38.02
(tax incl.)
The pneumatic filter blow valve is designed for the automatic cleaning of filters by means of compressed air pulses. Applications: industrial filtration systems (such as dust collectors or bag filters) Main features:...
€22.00
(tax excl.)
€26.62
(tax incl.)
The NBR blow-off valve membrane replacement is designed to ensure a tight seal and optimal valve functionality, allowing for efficient filter blow-off and expulsion of accumulated particles.
Applications: Pneumatic...
€56.70
(tax excl.)
€68.61
(tax incl.)
2/2 NC stainless steel solenoid valve 3/8" to 2" assisted control A 2/2 NC stainless steel solenoid valve, 3/8" to 2", with assisted control , is a fluid or gas flow control device that allows the passage to be opened...
€11.00
(tax excl.)
€13.31
(tax incl.)
MA30 coil for stainless steel solenoid valve An MA30 coil for stainless steel solenoid valves is an electromagnetic component designed to activate stainless steel solenoid valves, ensuring reliable, fast, and...
€57.00
(tax excl.)
€68.97
(tax incl.)
Valves designed for bag filter blowing installations, WITH COMPRESSION FITTING
Speed and high flow.
Membrane closure.
Working pressure 0.5 - 8 bar.
Temperature -40 / 80ºC.
Aluminum body.
Voltages to choose from...
€39.21
(tax excl.)
€47.44
(tax incl.)
A compression fitting filter blow valve is designed for purging and cleaning filters in compressed air systems, fluids or industrial processes.
Applications: Compressed air systems, Industrial filters and condensate...
€46.35
(tax excl.)
€56.08
(tax incl.)
2/2 N. normally closed solenoid valve, stainless steel, direct control A 2/2 N. normally closed stainless steel direct acting solenoid valve is an electromechanical control device designed to open or close the passage...
€84.10
(tax excl.)
€101.76
(tax incl.)
A 2/2 high-pressure AL08 solenoid valve is used in industrial systems to precisely and automatically control the flow of fluids (liquids or gases). It is designed to operate in systems requiring high pressures, such...
€46.86
(tax excl.)
€56.70
(tax incl.)
Combined control solenoid valve. No differential pressure is required for correct operation. P min. = 0 This solenoid valve solves the problem of opening and closing fluids when the pressure is low or zero. Mounting...
€58.60
(tax excl.)
€70.91
(tax incl.)
INOX-304 Solenoid Valve Normally Open. Size from 1/8" to 1/2" It comes with a coil and connector. Available in high pressure and NPT thread. IP-65 protection Operating temperature -20ºC / 80ºC Viscosity limit 20 cST....
€56.25
(tax excl.)
€68.06
(tax incl.)
A 3/2 N.open stainless steel 1/8" 1/4" direct control solenoid valve is used in systems that control the flow of liquids or gases to direct the passage of a fluid.
Applications: Industrial automation, Food and...
€12.85
(tax excl.)
€15.55
(tax incl.)
A C4 solenoid valve coil is used to actuate directional valves in pneumatic and hydraulic systems.
Applications: Automation machinery, Process control systems, HVAC and Refrigeration, Mobile equipment, Automated...
€104.55
(tax excl.)
€126.51
(tax incl.)
A NG-10 parallel cross solenoid valve is a hydraulic directional control valve that controls oil flow in medium and high power hydraulic systems.
Common Applications: Heavy industrial machinery (presses, molding...
€104.55
(tax excl.)
€126.51
(tax incl.)
A NG-10 H-cross solenoid valve is a hydraulic directional control component. This configuration allows the movement of hydraulic actuators (cylinders, motors) to be controlled precisely.
Common Applications: Heavy...
€136.99
(tax excl.)
€165.76
(tax incl.)
A NG-10 4/3 closed center solenoid valve is used for precise fluid control in medium and high power hydraulic systems.
Common Applications: Heavy industrial machinery (presses, molding machinery), Construction and...
€136.99
(tax excl.)
€165.76
(tax incl.)
The NG-10 4/3 ABT Center Solenoid Valve is a hydraulic component that controls fluids in medium and high power hydraulic systems. The valve has 4 ways (ports) and 3 internal spool positions.
Applications: Heavy...
€145.64
(tax excl.)
€176.22
(tax incl.)
The NG-10 4/3 PT center solenoid valve is used for precise fluid control in medium and high power hydraulic systems.
Common Applications: Heavy industrial machinery (presses, molding machinery), Construction and...
Showing 1-60 of 77 item(s)
What are solenoid valves?
Solenoid valves are electromechanical devices that control the flow of fluids (liquids or gases) using an electrical signal. Their operation is based on a solenoid that converts electrical energy into mechanical motion to open or close the flow of fluid.
What is the purpose of a solenoid valve?
It is used to open, close or regulate the flow in a system automatically or remotely, being a key component in industrial processes, automation, pneumatics and hydraulics.
How does a solenoid valve work?
When the coil receives an electrical current, it generates a magnetic field that moves an internal piston, allowing or blocking the flow of fluid. When the current is cut off, a spring returns the system to its initial position.
What factors should be considered when choosing a solenoid valve?
Before choosing a model, it's advisable to analyze the type of fluid, the available pressure, the operating temperature, and the flow rate. Furthermore, it's important to consider the chemical compatibility between the fluid and the materials to prevent corrosion or degradation. The expected operating frequency and whether the system requires direct or pilot operation are also factors.
In what industrial applications are they used?
Solenoid valves are present in virtually every industrial sector. They are used in automation, hydraulic machinery, water treatment systems, chemical processes, air conditioning, and refrigeration.
What is the difference between a solenoid valve and a manual valve?
The solenoid valve is operated by electricity and allows for the automation of processes, while a manual valve requires direct operator intervention.
What is the delivery time for solenoid valves?
Delivery times vary depending on availability. Products in stock are usually shipped within 24-48 hours, while others may require a longer time.
Can I buy solenoid valves in different voltages?
Yes, we have models with different voltages (12V, 24V, 110V, 220V, etc.). It is important to select the correct voltage before making your purchase.
Can I request a quote for large quantities?
Yes, we offer customized quotes for bulk purchases or industrial projects.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
