Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
SOLENOID VALVE NG-10 4/3 CENTER P-T
SOLENOID VALVE NG-10 4/3 CENTER P-T
SOLENOID VALVE NG-10 4/3 CENTER P-T
SOLENOID VALVE NG-10 4/3 CENTER P-T
SOLENOID VALVE NG-10 4/3 CENTER P-T
SOLENOID VALVE NG-10 4/3 CENTER P-T

SOLENOID VALVE NG-10 4/3 CENTER P-T

The NG-10 4/3 PT center solenoid valve is used for precise fluid control in medium and high power hydraulic systems.

Common Applications: Heavy industrial machinery (presses, molding machinery), Construction and mining equipment, High power hydraulic systems, Agricultural machinery.

Technical data sheet:

  • Maximum pressure 315 bar.
  • Flow rate 160 l/min.
  • Available voltages 12Vdc - 24Vdc - 24Vac - 220V ac - 110Vac. SUPPLIED WITH COILS
  • Supplied with connector and 4 screws.
€176.22 (tax included)
€145.64 (tax excl.)
VOLTAGE/VOLUME
  • 12V DC
  • 24V DC
  • 24VAC
  • 110V AC
  • 220VAC
Reference:
470400011
Description

solenoid valve NG-10 4/3 PT center

ELECTROVALVULA NG-10 43 CENTRO P-T G-30ELECTROVALVULA NG-10 43 CENTRO P-T G-30

Product Details
470400011
Comments
Related products
SINGLE OVERCENTER (BALANCE) VALVE NG-10 SINGLE OVERCENTER (BALANCE) VALVE NG-10

€290.00 (tax excl.)
€350.90 (tax included)
A single overcenter valve NG-10 is used to control movement and lock the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since the...
NG-10 SOLENOID VALVE COIL NG-10 SOLENOID VALVE COIL

€34.97 (tax excl.)
€42.31 (tax included)
The NG-10 solenoid valve coil is used to operate the spool of a NG-10 hydraulic solenoid valve. Common Applications: Heavy Industrial Machinery, Construction and Mining Equipment, High Power Hydraulic Systems,...
NG-10 SIDE BASE PLATE NG-10 SIDE BASE PLATE

€75.03 (tax excl.)
€90.79 (tax included)
A lateral NG-10 base plate serves as a mounting and connection interface for solenoid valves and other NG-10 (CETOP 5) sized hydraulic components. Connection ports for hydraulic lines are located on the sides of the...
NG-10 LOWER BASE PLATE NG-10 LOWER BASE PLATE

€82.00 (tax excl.)
€99.22 (tax included)
A lower NG-10 base plate serves as a mounting and connection point for solenoid valves and other hydraulic components that comply with the NG-10 (CETOP 5) standard. Connection ports for hydraulic lines are located on...
NG-10 MODULAR LIMITING VALVE NG-10 MODULAR LIMITING VALVE

€168.75 (tax excl.)
€204.19 (tax included)
A NG-10 modular relief valve is a hydraulic component designed to protect a circuit or section of a hydraulic system from excessive pressure by diverting unnecessary oil flow when the pressure exceeds a preset maximum...
11 other products in the same category:
NG-10 PARALLEL CROSS SOLENOID VALVE

€104.55 (tax excl.)
€126.51 (tax included)
A NG-10 parallel cross solenoid valve is a hydraulic directional control valve that controls oil flow in medium and high power hydraulic systems. Common Applications: Heavy industrial machinery (presses, molding...
NG-10 BLINDING PLATE

€49.01 (tax excl.)
€59.30 (tax included)
An NG-10 blanking plate is a component used to close or seal an NG-10 (CETOP 5) port or connection in a hydraulic system. It prevents hydraulic fluid leaks and protects the port from contamination. Common...
SOLENOID VALVE NG-10 4/3 CLOSED CENTER

€136.99 (tax excl.)
€165.76 (tax included)
A NG-10 4/3 closed center solenoid valve is used for precise fluid control in medium and high power hydraulic systems. Common Applications: Heavy industrial machinery (presses, molding machinery), Construction and...
SOLENOID VALVE NG-10 4/3 CENTER A-B-T

€136.99 (tax excl.)
€165.76 (tax included)
The NG-10 4/3 ABT Center Solenoid Valve is a hydraulic component that controls fluids in medium and high power hydraulic systems. The valve has 4 ways (ports) and 3 internal spool positions. Applications: Heavy...
NG-10 LOWER BASE PLATE

€82.00 (tax excl.)
€99.22 (tax included)
A lower NG-10 base plate serves as a mounting and connection point for solenoid valves and other hydraulic components that comply with the NG-10 (CETOP 5) standard. Connection ports for hydraulic lines are located on...
SOLENOID VALVE NG-10 CROSS H

€104.55 (tax excl.)
€126.51 (tax included)
A NG-10 H-cross solenoid valve is a hydraulic directional control component. This configuration allows the movement of hydraulic actuators (cylinders, motors) to be controlled precisely. Common Applications: Heavy...
NG-10 CLOSED CROSS SOLENOID VALVE

€104.55 (tax excl.)
€126.51 (tax included)
A closed NG-10 crossover solenoid valve is an electrically actuated hydraulic directional control valve. It is used to control the direction and direction of oil flow in a circuit. Common applications: industrial...
SOLENOID VALVE NG-10 4/3 CENTER H

€136.99 (tax excl.)
€165.76 (tax included)
The NG-10 4/3 center H solenoid valve is used for precise fluid control in medium and high power hydraulic systems. Applications: Heavy industrial machinery (presses, molding machinery), Construction and mining...
NG-10 SIDE BASE PLATE

€75.03 (tax excl.)
€90.79 (tax included)
A lateral NG-10 base plate serves as a mounting and connection interface for solenoid valves and other NG-10 (CETOP 5) sized hydraulic components. Connection ports for hydraulic lines are located on the sides of the...
NG-10 SOLENOID VALVE COIL

€34.97 (tax excl.)
€42.31 (tax included)
The NG-10 solenoid valve coil is used to operate the spool of a NG-10 hydraulic solenoid valve. Common Applications: Heavy Industrial Machinery, Construction and Mining Equipment, High Power Hydraulic Systems,...
DIN-43650-A LED T-30 CONNECTOR

€6.00 (tax excl.)
€7.26 (tax included)
The DIN-43650-A LED T-30 Connector is an electrical component designed for the fast and safe connection of cables in industrial and commercial applications. Applications: Machine control systems, outdoor lighting,...
Recently Viewed
SOLENOID VALVE NG-10 4/3 CENTER P-T

€176.22 (tax included)
€145.64 (tax excl.)
The NG-10 4/3 PT center solenoid valve is used for precise fluid control in medium and high power hydraulic systems. Common Applications: Heavy industrial machinery (presses, molding machinery), Construction and...
STAINLESS STEEL CENTRAL MALE CYLINDRICAL THREAD TUBE

€34.43 (tax excl.)
€41.66 (tax included)
Body and button made entirely of AISI 316L stainless steel. VITON gasket (FKM). Suitable for aggressive fluids and environments and food industry. Working pressures: -1/15 bar (at 20ºC). Working temperatures: -20 -...
FIG 601 SMOOTH HOSE SPIGOT THREAD STAINLESS STEEL 316

€1.90 (tax excl.)
€2.30 (tax included)
Fig 601 stainless steel 316 threaded hose barb is a threaded fitting used to connect a flexible hose to a rigid pipe or tube, allowing the flow of liquids or gases. It is a cylindrical piece with a male thread on one...
TE DIN-11851 MALE-FEMALE CENTER

€114.78 (tax excl.)
€138.88 (tax included)
A DIN-11851 male-female center tee is a type of pipe fitting designed to meet the stringent hygiene requirements of industries such as food, pharmaceuticals, and chemicals. The female connection is located at the...

Menu

Please sign in first.

Sign in