Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.

HYDRAULIC ACCESSORIES

Filter By
VERTICAL OIL SIGHT GLASS 1/4" DIN-3018

VERTICAL OIL SIGHT GLASS 1/4" DIN-3018

€60.81 (tax incl.)
€50.26 (tax excl.)
Body made of brass. Glass display. Various lengths in height. Threads 1/8"- 1/4"-3/8 1/2" Includes locknut. Max. temperature working 90ºC. Consult other options.
VERTICAL OIL SIGHT GLASS 3/8" DIN-3018

VERTICAL OIL SIGHT GLASS 3/8" DIN-3018

€88.33 (tax incl.)
€73.00 (tax excl.)
Body made of brass. Glass display. Various lengths in height. Threads 1/8"- 1/4"-3/8 1/2" Includes locknut. Max. temperature working 90ºC. Check prices and other options.
VERTICAL OIL SIGHT GLASS 1/2" DIN-3018

VERTICAL OIL SIGHT GLASS 1/2" DIN-3018

€163.35 (tax incl.)
€135.00 (tax excl.)
Body made of brass. Glass display. Various lengths in height. Threads 1/8"- 1/4"-3/8 1/2" Includes locknut. Max. temperature working 90ºC. Check prices and other options.
THREADED SIGHT GLASS

THREADED SIGHT GLASS

€3.63 (tax incl.)
€3.00 (tax excl.)
Threaded level sight glass. Aluminum body. Crystal sphere.
MANOMETER ADAPTER 1/4"

MANOMETER ADAPTER 1/4"

€6.01 (tax incl.)
€4.97 (tax excl.)
Adapter for 1/4" pressure gauge 1/4" swivel female male thread Supplied with the O-ring.  
PRESSURE TEST CASE

PRESSURE TEST CASE

€278.30 (tax incl.)
€230.00 (tax excl.)
Pressure checking case. 1 Manometer Ø 100 0-600 bar with glycerin and protection 1 Manometer Ø 63 0-60 bar with glycerin and protection. 1 Manometer Ø 63 0-250 bar with glycerin and protection. 1 Manometer adapter...
STAINLESS STEEL PRESSURE TRANSMITTER

STAINLESS STEEL PRESSURE TRANSMITTER

€96.80 (tax incl.)
€80.00 (tax excl.)
Stainless steel pressure transmitter Converts a pressure signal into a 4-20 mA output 1/2" Gas thread Reduced measurements. 4-20 mA output (2 wires) Power supply 12-28 V DC DIN-43650-C electrical connector Protection...
MEMBRANE PRESSURE SWITCH 1/4" N.OPEN

MEMBRANE PRESSURE SWITCH 1/4" N.OPEN

€33.88 (tax incl.)
€28.00 (tax excl.)
Normally open membrane pressure switch. 1/4" male thread Faston type terminals. Protection IP-54 Max intensity AC 0.5 A (250V) DC 0.15 A (110V)
STRAIGHT MANOMETER SAVER FT-290

STRAIGHT MANOMETER SAVER FT-290

€15.73 (tax incl.)
€13.00 (tax excl.)
Straight pressure gauge. It is used to close or open the fluid path and be able to check the pressure reading through the manometer, this way the manometer does not always work and its duration increases. 1/4"...
FT-291 ELBOW MANOMETER SAVER

FT-291 ELBOW MANOMETER SAVER

€15.73 (tax incl.)
€13.00 (tax excl.)
90º elbow pressure gauge FT-290. Straight pressure gauge. It is used to close or open the fluid path and be able to check the pressure reading through the manometer, this way the manometer does not always work and its...
OIL LEVEL

OIL LEVEL

€10.45 (tax incl.)
€8.64 (tax excl.)
Normalized oil level. 3 lengths between centers to choose from: 76, 127 and 254 mm. Check the threads of the screws (M-10 or M12) Working temperature -20ºC / +90ºC. Maximum pressure 2 bar. Compatible with oils of the...
OIL LEVEL WITH THERMOMETER

OIL LEVEL WITH THERMOMETER

€12.28 (tax incl.)
€10.15 (tax excl.)
Normalized oil level with thermometer. 3 lengths between centers to choose from: 76, 127 and 254 mm. Check screw thread (M-10 or M-12) Working temperature -20ºC / +90ºC. Maximum pressure 2 bar. Compatible with oils...
MAGNETIC CAP

MAGNETIC CAP

€5.57 (tax incl.)
€4.60 (tax excl.)
Magnetic stopper. Gas thread. Collects chips and other potentially dangerous metal particles. Available in 3 threads 1/2" - 3/4" - 1" BSP Supplied with copper gasket.
DEVAPORIZER CAP

DEVAPORIZER CAP

€3.01 (tax incl.)
€2.49 (tax excl.)
Devaporizer cap Includes filter. Made of aluminum
FILLING CAP

FILLING CAP

€8.83 (tax incl.)
€7.30 (tax excl.)
Filling cap. Includes filter. Supplied with gaskets and screws.
ELECTRICAL OIL LEVEL WITH FLANGE

ELECTRICAL OIL LEVEL WITH FLANGE

€76.23 (tax incl.)
€63.00 (tax excl.)
Electrical level with probe. Various probe lengths . 1" thread Possible fixation by plate. Voltages from 24V to 220V
MALE PRESSURE TAP ADAPTER

MALE PRESSURE TAP ADAPTER

€11.25 (tax incl.)
€9.30 (tax excl.)
Male thread pressure intake adapter. Working pressure 600 bar. Max pressure 400 bar connection Temperature -20 / 90ºC Steel body Includes cap.
AUTOMOBILE HYDRAULIC TROLLEY

HYDRAULIC TROLLEY VEHICLES

€453.75 (tax incl.)
€375.00 (tax excl.)
Set of 2 carts for interior transport of vehicles, especially useful for vehicles that have been accidented or have a mechanical problem that does not allow the wheel to function normally. With four cars you can turn...
SWITCHED HYDRAULIC PRESSURE SWITCH

SWITCHED HYDRAULIC PRESSURE SWITCH

€39.93 (tax incl.)
€33.00 (tax excl.)
Switched hydraulic piston pressure switch . 1/4" BSP male thread SPDT Contact Different fields of regulation. Maximum pressure 300 bar. Protection IP-65 Connection for wiring through DIN-43650-A three-pole.
Showing 1-19 of 19 item(s)

Accessories for Hydraulics. Buy at the best price

Hydraulic accessories are those that complement, help and improve an oleo-hydraulic system. Both in its operation and its maintenance.

These accessories could be classified as follows:

  • Sight glasses , display elements to control the hydraulic oil. They can be round peepholes or vertical peepholes, with different threads and measurements. It is also possible to request that the peephole come with a built-in thermometer to control the temperature.
  • Pressure Switches A pressure switch is an electronic device used in hydraulic systems to measure and control fluid pressure. It works by comparing the current pressure of the fluid with a preset value, and activates or deactivates an electrical circuit accordingly. The pressure switch is used to maintain fluid pressure within a specific range, which helps protect the hydraulic system and improve its performance. It is also used to automatically stop the operation of a hydraulic system if the pressure reaches a dangerous level.
  • Filling filters are elements that are placed in the hydraulic tank and by opening them we can fill the oil tank. They normally have a devaporizer built in to avoid any internal pressure.
  • Pressure intakes . They are elements that are placed in some strategic place in the hydraulic circuit to take and verify what pressure there is at that moment. It is done using a hose associated with a pressure gauge. There is a briefcase with countless adapters to take pressures. They are easy to install and require almost no maintenance. They are economical.

They are used in practically all types of industry, since they are elements that are incorporated into any oil-hydraulic installation.

Read more

Menu

Please sign in first.

Sign in