Click for more products.
No produts were found.
Click for more products.
No produts were found.

XMLA300D2S11 Pressure Switch

XMLA300D2S11 Pressure Switch

  • Maximum pressure 300 bar
  • 1 scale limit
  • NO/NC Switch
  • IP-66 protection rating
  • Temperature -25 / 70ºC
  • 1/4" female thread

Download technical data sheet

€145.20 (tax included)
€120.00 (tax excl.)
Reference:
XMLA300D2S11
Description

XMLA300D2S11 Pressure Switch

Product Details
XMLA300D2S11
Comments
12 other products in the same category:
€90.00 (tax excl.)
€108.90 (tax included)
2-WAY HYDRAULIC SOLENOID VALVE, NORMALLY OPEN, DOUBLE CHECK Maximum pressure 3/8 280 bar. Maximum pressure 1/2 250 bar Flow rate 3/8" 40 l/min Flow rate 1/2" 70 l/min Operating temperature -20/90ºC Aluminum body, NBR...
€15.00 (tax excl.)
€18.15 (tax included)
A solenoid valve coil is used to actuate directional valves in pneumatic and hydraulic systems. Applications: Automation machinery, Process control systems, HVAC and Refrigeration, Mobile equipment, Automated...
€155.00 (tax excl.)
€187.55 (tax included)
A 6-way diverter solenoid valve is a valve that controls the flow of a fluid in six different directions. It is used to divert fluid from one line to another, or to combine fluid from two or more lines. 6-way diverter...
€490.00 (tax excl.)
€592.90 (tax included)
GR1 Gear Flow Divider A GR1 two-body gear flow divider splits a unidirectional flow into two proportional flows, using two gear bodies that rotate at the same speed on a single shaft. Ideal for synchronizing the speed...
€38.40 (tax excl.)
€46.46 (tax included)
Compensated 2-way flow regulator. Two chokes in series are present in the valve. The first corresponds to the one that is adjustable using the knob; The second, controlled by the pressure prior to and following the...
€65.00 (tax excl.)
€78.65 (tax included)
The manual 6-way hydraulic diverter valve is a control component in a hydraulic system that allows the operator to manually redirect the flow of a hydraulic fluid (usually oil) from one line to another or to a...
€140.00 (tax excl.)
€169.40 (tax included)
The Wika A-10 pressure transmitter is a pressure sensor designed for general industrial applications requiring accurate, reliable, and continuous measurement. Applications: hydraulic systems, pneumatic systems, pumps,...
€113.56 (tax excl.)
€137.41 (tax included)
Sliding flow divider A spool flow divider is a type of hydraulic valve used to split an oil flow into two or more equal flows. The valve has a spool that moves along an orifice, dividing the oil flow into two or more...
€33.00 (tax excl.)
€39.93 (tax included)
A piston-type switching hydraulic pressure switch is used in hydraulic systems to control fluid flow based on pressure. It operates by means of an internal piston that moves in response to hydraulic fluid pressure....
€54.00 (tax excl.)
€65.34 (tax included)
HYDRAULIC NC LIMIT SWITCH. Normally Closed Position Maximum working pressure 350 bar. Flow rate 3/8" 50 l/min Flow rate 1/2" 70 l/min Flow rate 3/4" 100 l/min Manufactured from zinc-plated steel, with internal...
€37.95 (tax excl.)
€45.92 (tax included)
Pressure limiting valve An in-line pressure limiting valve is a safety component that is installed directly on the piping of a hydraulic system to limit the maximum allowable pressure in the circuit. When the fluid...
€20.93 (tax excl.)
€25.33 (tax included)
Double pilot check valve. It allows fluid flow in one direction and blocks it in the opposite direction. It differs from a simple check valve in that its operation is controlled by two hydraulic pilots, providing...
Recently Viewed
€145.20 (tax included)
€120.00 (tax excl.)
XMLA300D2S11 Pressure Switch Maximum pressure 300 bar 1 scale limit NO/NC Switch IP-66 protection rating Temperature -25 / 70ºC 1/4" female thread Download technical data sheet

Menu