Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
LEVER FOR MONOBLOC DISTRIBUTOR
LEVER FOR MONOBLOC DISTRIBUTOR
LEVER FOR MONOBLOC DISTRIBUTOR
LEVER FOR MONOBLOC DISTRIBUTOR

LEVER FOR MONOBLOC DISTRIBUTOR

The lever for a monobloc distributor is the mechanical control element that allows the operator to control the movement of the internal slide of a hydraulic valve.

Applications: agricultural machinery, cranes and trailers, cleaning machinery

Main features:

  • For 3/8" - 1/2" models. Length 160 mm. M-8 thread.
  • For 3/4" - 1" models. Length 205 mm. M-10 thread.
  • Supplied with lock nut
€2.90 (tax included)
€2.40 (tax excl.)
SIZE
  • 3/8"-1/2"
  • 3/4"-1"
Reference:
49400000
Description

Lever for monobloc distributor

The monobloc distributor lever is a manually operated element designed to control monobloc hydraulic distributor valves. It allows for precise control of fluid flow and direction within the system, facilitating the operation of actuators such as hydraulic cylinders or motors.

Recommendations

It is recommended to verify compatibility with the specific distributor model and ensure proper fastening to avoid looseness during use.

Main applications

These levers are standard in machinery that requires direct tactile control:

  • Agricultural machinery: Control of a tractor's arms or the tilt of a plow.
  • Cranes and trailers: Operation of stabilizers or loading ramps.
  • Cleaning machinery: Control of industrial sweepers or garbage compactors.
  • Industrial hydraulic systems
Product Details
49400000
Comments
12 other products in the same category:
ONE-WAY PINEAPPLE FLOW REGULATOR

€18.31 (tax excl.)
€22.16 (tax included)
The one-way pineapple flow regulator is designed to regulate the forward or reverse speed of hydraulic cylinders, controlling the oil flow in a single direction of circulation and allowing free passage in the opposite...
SWITCHED HYDRAULIC PRESSURE SWITCH

€33.00 (tax excl.)
€39.93 (tax included)
A piston-type switching hydraulic pressure switch is used in hydraulic systems to control fluid flow based on pressure. It operates by means of an internal piston that moves in response to hydraulic fluid pressure....
PRESSURE SWITCH WITH KNOB

€67.00 (tax excl.)
€81.07 (tax included)
A pressure switch with a knob is a device that opens or closes an electrical circuit based on a preset pressure, adjusted by the knob. It activates automatically when the pressure reaches the preset value....
6-WAY MANUAL HYDRAULIC DIVERTER VALVE

€65.00 (tax excl.)
€78.65 (tax included)
The manual 6-way hydraulic diverter valve is a control component in a hydraulic system that allows the operator to manually redirect the flow of a hydraulic fluid (usually oil) from one line to another or to a...
2-WAY HYDRAULIC SOLENOID VALVE, NORMALLY CLOSED, DOUBLE CHECK

€85.00 (tax excl.)
€102.85 (tax included)
2-WAY HYDRAULIC SOLENOID VALVE, NORMALLY CLOSED, DOUBLE CHECK Maximum pressure 280 bar. Flow rate 3/8" 30 l/min Flow rate 1/2" 70 l/min Operating temperature -20/90ºC Aluminum body, NBR gaskets Alternating current...
6-WAY DIVERTER VALVE SOLENOID VALVE

€155.00 (tax excl.)
€187.55 (tax included)
A 6-way diverter solenoid valve is a valve that controls the flow of a fluid in six different directions. It is used to divert fluid from one line to another, or to combine fluid from two or more lines. 6-way diverter...
2-WAY HYDRAULIC SOLENOID VALVE COIL

€15.00 (tax excl.)
€18.15 (tax included)
A solenoid valve coil is used to actuate directional valves in pneumatic and hydraulic systems. Applications: Automation machinery, Process control systems, HVAC and Refrigeration, Mobile equipment, Automated...
Extended ball fitting

€2.80 (tax excl.)
€3.39 (tax included)
Extended ball fitting for mounting on double piloted check valves Technical sheet: Made of carbon steel. Working temperature -40 / 150ºC. Working pressure 250 bar. Possibility of choosing various lengths and diameters...
WIKA A-10 PRESSURE TRANSMITTER

€140.00 (tax excl.)
€169.40 (tax included)
The Wika A-10 pressure transmitter is a pressure sensor designed for general industrial applications requiring accurate, reliable, and continuous measurement. Applications: hydraulic systems, pneumatic systems, pumps,...
LEVER MONOBLOC DISTRIBUTOR

€96.56 (tax excl.)
€116.84 (tax included)
Monobloc distributor with spring return to center lever. Double effect. Includes limiting valve. The position of the lever can be vertical or horizontal. Availability of 1 to 8 positions with lever, depending on...
MALE THREAD NON-RETURN

€11.18 (tax excl.)
€13.53 (tax included)
Hydraulic 60º cone male thread non-return valve . Q Zinc-plated steel body, internal elements in tempered steel. Opening pressure 1 bar. (other pressures, consult) Oil temperature 50ºC viscosity 30 cSt Flow rates from...
SLIDING FLOW DIVIDER

€113.56 (tax excl.)
€137.41 (tax included)
Sliding flow divider A spool flow divider is a type of hydraulic valve used to split an oil flow into two or more equal flows. The valve has a spool that moves along an orifice, dividing the oil flow into two or more...
Recently Viewed
LEVER FOR MONOBLOC DISTRIBUTOR

€2.90 (tax included)
€2.40 (tax excl.)
The lever for a monobloc distributor is the mechanical control element that allows the operator to control the movement of the internal slide of a hydraulic valve. Applications: agricultural machinery, cranes and...
3/2 M5 LEVER MICROVALVE

€24.00 (tax excl.)
€29.04 (tax included)
A 3/2 M5 lever microvalve is a miniature valve designed to control fluid flow in applications with limited space. It has three ports and two operating positions. In its resting position, the valve blocks fluid flow...

Menu

Please sign in first.

Sign in