Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
HYDRAULIC NC LIMIT SWITCH
HYDRAULIC NC LIMIT SWITCH
HYDRAULIC NC LIMIT SWITCH
HYDRAULIC NC LIMIT SWITCH

HYDRAULIC NC LIMIT SWITCH

HYDRAULIC NC LIMIT SWITCH.

  • Normally Closed Position
  • Maximum working pressure 350 bar.
  • Flow rate 3/8" 50 l/min
  • Flow rate 1/2" 70 l/min
  • Flow rate 3/4" 100 l/min
  • Manufactured from zinc-plated steel, with internal components made of heat-hardened and ground steel. NBR gaskets.
  • Maximum pivot stroke 13 mm.
€65.34 (tax included)
€54.00 (tax excl.)
SELECT THE THREAD
  • 3/8"
  • 1/2"
  • 3/4"
Reference:
491350
Description

HYDRAULIC LIMIT SWITCH.

Product Details
491350
Comments
Related products
BUNA METAL GASKET BUNA METAL GASKET

€0.21 (tax excl.)
€0.25 (tax included)
metal gasket The Metal Buna gasket is a sealing element composed of an outer metal ring and an inner elastomer (NBR) ring. It is used to achieve a watertight seal in threaded and flanged joints. The main function of...
MALE-TO-MALE JOINT FITTING MALE-TO-MALE JOINT FITTING

€0.55 (tax excl.)
€0.67 (tax included)
Male-to-male splice fitting A male-to-male coupling is used in hydraulic systems to directly join two male pipes or hoses, allowing the flow of hydraulic fluid between them. The male threads are screwed into the...
12 other products in the same category:
SWITCHED HYDRAULIC PRESSURE SWITCH

€33.00 (tax excl.)
€39.93 (tax included)
A piston-type switching hydraulic pressure switch is used in hydraulic systems to control fluid flow based on pressure. It operates by means of an internal piston that moves in response to hydraulic fluid pressure....
WIKA A-10 PRESSURE TRANSMITTER

€140.00 (tax excl.)
€169.40 (tax included)
The Wika A-10 pressure transmitter is a pressure sensor designed for general industrial applications requiring accurate, reliable, and continuous measurement. Applications: hydraulic systems, pneumatic systems, pumps,...
BUTTON GRIP EE1B

€30.00 (tax excl.)
€36.30 (tax included)
1-button joystick-type handle to control 1 coil. 2-wire cable A single push button. M-10x150 threaded fixing.
LEVER FOR MONOBLOC DISTRIBUTOR

€2.40 (tax excl.)
€2.90 (tax included)
The lever for a monobloc distributor is the mechanical control element that allows the operator to control the movement of the internal slide of a hydraulic valve. Applications: agricultural machinery, cranes and...
PUSH-BUTTON JOYSTICK GRIP

€40.00 (tax excl.)
€48.40 (tax included)
Push-button joystick grip. Function NO It is commonly used in various types of heavy machinery, such as excavators, loaders and other construction equipment. Normally open function. NO Possibility to select from 1 to...
DOUBLE PILOT CHECK VALVE

€20.93 (tax excl.)
€25.33 (tax included)
Double pilot check valve. It allows fluid flow in one direction and blocks it in the opposite direction. It differs from a simple check valve in that its operation is controlled by two hydraulic pilots, providing...
LEVER MONOBLOC DISTRIBUTOR

€96.56 (tax excl.)
€116.84 (tax included)
Monobloc distributor with spring return to center lever. Double effect. Includes limiting valve. The position of the lever can be vertical or horizontal. Availability of 1 to 8 positions with lever, depending on...
6-WAY MANUAL HYDRAULIC DIVERTER VALVE

€65.00 (tax excl.)
€78.65 (tax included)
The manual 6-way hydraulic diverter valve is a control component in a hydraulic system that allows the operator to manually redirect the flow of a hydraulic fluid (usually oil) from one line to another or to a...
SLIDING FLOW DIVIDER

€113.56 (tax excl.)
€137.41 (tax included)
Sliding flow divider A spool flow divider is a type of hydraulic valve used to split an oil flow into two or more equal flows. The valve has a spool that moves along an orifice, dividing the oil flow into two or more...
SINGLE PILOT CHECK VALVE

€28.70 (tax excl.)
€34.73 (tax included)
Single pilot check valve. It is used in hydraulic systems to allow fluid flow in one direction and prevent backflow. An auxiliary pressure valve controls the opening and closing of the main valve. Technical sheet:...
COMPENSATED HYDRAULIC FLOW REGULATOR

€38.40 (tax excl.)
€46.46 (tax included)
Compensated 2-way flow regulator. Two chokes in series are present in the valve. The first corresponds to the one that is adjustable using the knob; The second, controlled by the pressure prior to and following the...
SEQUENCE VALVE

€125.50 (tax excl.)
€151.86 (tax included)
In-line pressure reducing valve (sequence). A hydraulic sequence valve is a component used in hydraulic systems to control the order in which hydraulic cylinders or motors are activated. Its main function is to ensure...
Recently Viewed
HYDRAULIC NC LIMIT SWITCH

€65.34 (tax included)
€54.00 (tax excl.)
HYDRAULIC NC LIMIT SWITCH. Normally Closed Position Maximum working pressure 350 bar. Flow rate 3/8" 50 l/min Flow rate 1/2" 70 l/min Flow rate 3/4" 100 l/min Manufactured from zinc-plated steel, with internal...
FLUSH PUSHBUTTON RM 010

€13.00 (tax excl.)
€15.73 (tax included)
The RM 010 flush-mounted push button is used to control fluid flow in a pipe. It has a flush button that is pressed to open the valve and allow fluid flow; when the button is released, the valve closes and the fluid...

Menu

Please sign in first.

Sign in