Click for more products.
No produts were found.

LUBRICUS S Greasers

Filter By
€227.10 (tax excl.)
LUB SV automatic oiler at 24 VDC. Ideal for controlling minimum quantities. Due to its high performance, it can be used in combination with splitters or progressive distributors with up to 10 lubrication points....
€44.40 (tax excl.)
Connection cable for Lubricus LUB-V , LUB-C , LUB-D Built-in LED M-12 x 1 thread, free end. 4-pole, A-coded. Possibility between 5 mt. and 10 mt. Polyurethane Cable. Resistant to oils and coolants. Protection IP-67,...
€20.30 (tax excl.)
Connection cable for Lubricus LUB-V , LUB-C , LUB-D M-12 x 1 thread, free end. 4-pole, A-coded. Possibility between 5 mt. and 10 mt. Polyurethane Cable. Resistant to oils and coolants. Protection IP-67, IP-68, IP-69K
€60.90 (tax excl.)
The splitters distribute a uniform amount of lubricant to the exhaust points and are suitable for oil with a consistency greater than ISO VG-100. The amount of lubricant transported by the system will be divided...
€60.90 (tax excl.)
The spliters distribute a uniform amount of lubricant at the exhaust points and are suitable even for NLGI grade 2 greases and also oils. The amount of lubricant transported by the system will be divided between 2, 3...
€252.00 (tax excl.)
Progressive Lubricationnipple The progressive systems are optimized for use in medium and small machinery, combining the greatest robustness with an unbeatable quality-price ratio for the construction industry,...
€34.50 (tax excl.)
Universal LUB-KA-S-01 Li/Ca Lubricationcartridge based on mineral oil. For general lubrication. Pressure 50 bar. For Lubricus-S For general lubrication Temperature -30º / 120ºC. Volume 250 cm³ Weight without lubricant...
Showing 1-8 of 8 item(s)

LUB SV Automatic greasers. Buy online at the best price

The Lubricus LUB-S V automatic oiler is a device used to apply oil or Lubricationconstantly and uniformly to moving machinery, equipment and systems and operates using a voltage of 24V DC. This model has 1 threaded outlet and can reliably supply lubricant to lubrication points for up to 24 months. Optionally it can be supplied with a 5 or 10 meter power cable, with straight or angled connector, with LED indicating when there is voltage.

This Lubricus LUB SV is ideal for discontinuous services. It has 3 types of operation, in hours, in operating time, in pulse mode. The LUB SV system is innovative, flexible and variable. The new LUB SV opens a new door in the world of automatic lubrication, allowing lubricant to be supplied both to individual points and to a complete group of lubrication points of different types over a long period of time continuously and safely thanks to the placement of a progressive distributor or splitters.

Thanks to its compact dimensions, the LUB SV is ideal for retrofitting in different applications, allowing an individual lubrication solution ideal for almost any application. The LUB SV model, which operates with 24 V DC power, is used whenever a 24 VDC power supply is desired or necessary. The lubricant is drained automatically, optionally from 1-24 months

They can operate with oils or greases up to NLGI 2 consistency. LUB SV automatic oilers are refillable once the oil or Lubricationis used up. There are 2 cartridge capacities for refilling, 125 ml and 250 ml. Being refillable, it can be loaded with any type of Lubricationor ordered directly with the factory pre-established grease. There is a Lubricationfor each type of application, universal greases, lithium greases, food greases, ecological greases, high temperature greases, for large loads, etc...

The working pressure is up to 50 bar (1015 psi) thanks to its internal electromechanical gear motor. The service temperature is from -20ºC to +70ºC The flow does not vary depending on the temperature, as can occur with gas-operated lubricators. Programming the LUB SV lubrication unit is simple and intuitive using a digital panel with magnetic control. Fully programmable and adjustable to each need. All functions and alarms can be displayed on the LED panel. It has the Quick-Check function that measures the back pressure in the circuit and compensates the flow to introduce the one that has been programmed and performs the additional work.

The fields of application of the LUB SV are very broad, for example these would be some applications:

  • Heavy Machinery: Automatic oilers are used on heavy machinery such as excavators, bulldozers, cranes and other construction equipment to lubricate critical components that are constantly moving.
  • Transportation: Automatic oilers are also used in transportation vehicles, such as trucks, buses, and trains, to lubricate suspension components, transmission, and other systems.
  • Industrial machinery: In industry, automatic greasers are used in machinery such as presses, lathes, milling machines, packaging equipment, among others, to lubricate critical components that are constantly moving.
  • Agricultural Equipment: Automatic lubricators are used on agricultural equipment, such as tractors, combines, planters, among others, to lubricate critical components that are constantly moving.
  • Marine Equipment: Automatic oilers are used on ships and boats to lubricate critical components that are constantly moving, such as engines, propellers and pumps.
Read more

Menu

Settings