Click for more products.
No produts were found.

PNEUMATIC ACTUATORS

Filter By
€103.50 (tax excl.)
Single-acting actuator with 3-way ball valve and "T" type full bore. This step is used for fluid bypass and mixing. Manufactured in INOX-316 PTFE gasket Gas-Din 2999 threaded ends Pressure 63 bar. Temperature...
€35.00 (tax excl.)
Double acting pneumatic actuator External regulation of the opening of a wide range of models ranging from 9 to 48833 Nm. Polyester epoxy caps, chemical nickel shaft, AISI 316 body or hard anodized. They are used for...
€32.72 (tax excl.)
A NAMUR connection electrical distributor is an electromechanical device used to connect and disconnect a pneumatic actuator to an electrical power source. NAMUR connection electrical distributors are used in a wide...
€25.00 (tax excl.)
Electromechanical limit switch. Highly visible Open/Closed position indicator. Includes 2 universal stainless steel fixing brackets to mount on any actuator. Easy access to the interior of the box, for cable...
€40.00 (tax excl.)
INOX closed N inclined seat valve , spring return. with pneumatic pilot PTFE (Teflon) sealing gasket INOX-316 valve body Compact design. Optionally it can be served normally open and double acting. (check the price)...
€124.00 (tax excl.)
Stainless steel 316 disc, EPDM gaskets Body in gray cast iron GG25, nodular cast iron GGG40-GGG50 Manufacturing standards: DIN 1691/1 UNE EN 1561, DIN 1693 / UNE EN 1563. Connection between DIN 2501 PN10/16 and ASME...
€94.50 (tax excl.)
Stainless steel 316 disc, EPDM gaskets Body in gray cast iron GG25, nodular cast iron GGG40-GGG50 Manufacturing standards: DIN 1691/1 UNE EN 1561, DIN 1693 / UNE EN 1563. Connection between DIN 2501 PN10/16 and ASME...
€120.00 (tax excl.)
Cast disc, EPDM seals Body in gray cast iron GG25, nodular cast iron GGG40-GGG50 Manufacturing standards: DIN 1691/1 UNE EN 1561, DIN 1693 / UNE EN 1563. Connection between DIN 2501 PN10/16 and ASME B16.5 flanges...
€90.00 (tax excl.)
Cast disc, EPDM seals Body in gray cast iron GG25, nodular cast iron GGG40-GGG50 Manufacturing standards: DIN 1691/1 UNE EN 1561, DIN 1693 / UNE EN 1563. Connection between DIN 2501 PN10/16 and ASME B16.5 flanges...
€3.50 (tax excl.)
Converter socket or square to adapt to pneumatic actuators. They are used to couple the actuator with the valve shaft, when there is a distance between them.
€97.43 (tax excl.)
Single acting pneumatic actuator. It is used for the control and regulation of butterfly, ball, gate valves, etc., with different maneuvers and diameters between DN 15 and DN 1000. External regulation of the opening...
€60.00 (tax excl.)
Normally closed buffer valve. It serves to activate the passage of fluids through the action of air. Linear bore pneumatically actuated valve with plug closure. Its compact design allows dimensions to be reduced....
€67.57 (tax excl.)
Linear bore pneumatic actuated valve with buffer closure, Its compact design allows dimensions to be reduced. Complete range from 3/8" to 2 1/2" and in NC, NA and DE versions. Possibility of incorporating external...
€45.00 (tax excl.)
-The speed controller for pneumatic actuators has been designed with advanced technology specifically to be used to control the opening and closing speed of pneumatic actuators.-This speed controller can be mounted...
Showing 1-21 of 21 item(s)

Buy Pneumatic Actuators online

Pneumatic actuators are usually of two types, single and double acting, they are used to automate all types of valves with ISO-5211 coupling plate, ball valves, butterfly valves, food valves, hydraulic valves, 2-way and three-way valves.

Single-acting actuators only need an air signal, they return using springs. Double-acting actuators require 2 different air signals to open and close the valves.

pneumatic actuators They are provided with opening regulation, using two screws. The movement is produced by a rack and pinion.

Possibility of choosing a wide torque level, from 9 to more than 48,000 N/m at different pressures.

Pneumatic actuators can carry atex certification in various environments. Up to standard protection II 2GD c T4.

In single and double acting actuators we can connect the control solenoid valves directly to the NAMUR plane. Likewise, a limit switch can be connected that can be mechanical, electromechanical or inductive, this allows us to have total control of the movements and status of the valve.

Applications of pneumatic actuators:  In all types of industry where valve automation is required, in the opening, closing and mixing of both gases and liquids.

Read more

Menu

Settings