Click for more products.
No products were found.

ATEX LIMIT SWITCH WITH 2 INDUCTIVE DETECTORS

An ATEX limit switch with 2 inductive detectors is a safety device that detects the presence of metallic objects in environments with risk of explosion (ATEX). It is mainly used in industrial applications where it is necessary to ensure the safety of processes and personnel.

The ATEX housing protects the internal components and ensures that the device is safe for use in areas at risk of explosion.

ATEX limit switches with 2 inductive detectors have a wide range of applications in industrial environments such as the chemical industry, the oil and gas industry, the food industry and water treatment.

Technical data sheet:

  • Manufactured according to EN 60079-1 and EN 60079-31 standards
  • IP-66 protection grade
  • ATEX regulations 2014/34/EU: Ex d IIB T6
  • Visual open/closed position indicator
  • Double cable entry M-20x1.5
  • Supplied with 2 brackets for attachment to the actuator.

Read moreShow less
€377.52 (tax incl.)
€312.00 (tax excl.)
Reference:
51262
Description

ATEX limit switch with 2 inductive detectors

Read moreShow less
Product Details
51262
Comments (0)
You may also like
€116.53 (tax excl.)
€141.00 (tax incl.)
Single acting pneumatic actuator. It is used for the control and regulation of butterfly, ball, gate valves, etc., with different maneuvers and diameters between DN 15 and DN 1000. External regulation of the opening...
€41.86 (tax excl.)
€50.65 (tax incl.)
Double acting pneumatic actuator External regulation of the opening of a wide range of models ranging from 9 to 48833 Nm. Polyester epoxy caps, chemical nickel shaft, AISI 316 body or hard anodized. They are used for...
8 other products in the same category:
€94.19 (tax excl.)
€113.97 (tax incl.)
A 2-piece stainless steel valve with a single-acting actuator uses compressed air to perform one action (open or close) and a spring for the opposite action. Applications: Piping systems in chemical, petrochemical,...
€71.76 (tax excl.)
€86.83 (tax incl.)
Normally closed buffer valve. It serves to activate the passage of fluids through the action of air. Linear bore pneumatically actuated valve with plug closure. Its compact design allows dimensions to be reduced....
€107.64 (tax excl.)
€130.24 (tax incl.)
A double-acting cast wafer disc butterfly valve is used to control fluid flow in pipelines. The actuator is used to open and close the valve. Applications: Water and wastewater treatment systems, HVAC systems, General...
€80.81 (tax excl.)
€97.78 (tax incl.)
pneumatically actuated linear flow buffer valve Its compact design allows for reduced dimensions. Full range from 3/8" to 2 1/2" and in DOUBLE EFFECT. Possibility of incorporating an external indicator (sensor)...
€39.13 (tax excl.)
€47.35 (tax incl.)
A NAMUR electrical connection distributor is used to connect and disconnect a pneumatic actuator to an electrical power source. It is used in a wide range of applications such as industrial machines, transportation...
€386.00 (tax excl.)
€467.06 (tax incl.)
A kinetrol 074-100 double-acting pneumatic actuator is a mechanical device that uses the energy of compressed air to generate rotary motion and operate a quarter-turn valve (such as a ball or butterfly valve)....
Recently Viewed
€377.52 (tax incl.)
€312.00 (tax excl.)
An ATEX limit switch with 2 inductive detectors is a safety device that detects the presence of metallic objects in environments with risk of explosion (ATEX). It is mainly used in industrial applications where it is...
€17.35 (tax excl.)
€21.00 (tax incl.)
The Glass Clamp support for glass is compatible with aluminum profile systems. It allows for the secure mounting of glass, glass panels, or acrylic on modular aluminum structures without the need for drilling into the...
€5.60 (tax excl.)
€6.78 (tax incl.)
The T22 coil is installed in 1/4" and 1/2" solenoid valves. It is a fundamental component in the operation of a solenoid valve. It is responsible for transforming electrical energy into magnetic energy, generating a...
€1.48 (tax excl.)
€1.80 (tax incl.)
A swivel anchor with a flange is a fastener used in construction to join materials such as bricks, concrete blocks, or panels to a supporting structure. It is especially useful in applications where flexibility is...
€7.99 (tax excl.)
€9.67 (tax incl.)
A stainless steel press reducing tee is used in piping systems that require high corrosion resistance and secure joints, especially in sanitary and industrial applications. Applications: Food industry, Pharmaceutical...
€39.90 (tax excl.)
€48.28 (tax incl.)
A rotary lever valve is used to manually control the flow of compressed air. It is operated by a lever that rotates to open or close the air passage. Applications: Industrial automation, Medical equipment, Robotics...

Menu

Settings