ISO I SIMPLE BASE PLATE
€18.75
(tax excl.)
€22.69
(tax included)
STAINLESS STEEL VALVES
€7.64
(tax excl.)
€9.24
(tax included)
The BSP PN-63 female stainless steel ball valve is used in hydraulic and fluid systems to control fluid flow in two directions (on and off). It consists of an AISI 316 stainless steel body, a female thread for...
€18.92
(tax excl.)
€22.89
(tax included)
A stainless steel sampling valve is used to extract small quantities of fluid from an industrial process or piping system, in order to perform analysis or quality control. Common applications: Food and beverage...
€47.84
(tax excl.)
€57.89
(tax included)
A closed stainless steel angle seat valve N. works to control the flow of fluids (liquids or gases) in pneumatic, hydraulic or general fluid systems. In the rest state, the valve is closed and an external signal...
€148.30
(tax excl.)
€179.44
(tax included)
A single-acting stainless steel wafer disc butterfly valve is used to control the flow of fluids in pipes. Applications: Chemical industry, Food industry, Water treatment, HVAC systems and general piping systems....
€113.02
(tax excl.)
€136.75
(tax included)
A double-acting stainless steel wafer disc butterfly valve is used in piping systems to control the flow of liquids or gases. The closing element is a flat disc that rotates around an axis. Applications: Water...
€94.19
(tax excl.)
€113.97
(tax included)
A 2-piece stainless steel valve with a single-acting actuator uses compressed air to perform one action (open or close) and a spring for the opposite action. Applications: Piping systems in chemical, petrochemical,...
€84.32
(tax excl.)
€102.03
(tax included)
A 2-piece stainless steel ball valve with double-acting actuator is used to control the flow of fluids in hydraulic, pneumatic and process systems. It combines the simplicity of a ball valve with the automation of a...
€106.74
(tax excl.)
€129.16
(tax included)
The double-acting actuator with a 3-way T-shaped stainless steel valve is used to control the flow of a fluid (usually air or liquid) through a 3-way T-shaped valve. The valve, made of stainless steel, guarantees high...
€123.79
(tax excl.)
€149.79
(tax included)
The single-acting actuator with 3-way L stainless steel valve is a component used in pneumatic or hydraulic systems to control the flow of a fluid through a valve. It is used in a wide variety of applications...
€106.74
(tax excl.)
€129.16
(tax included)
A double-acting actuator with a 3-way L stainless steel valve is an electromechanical device used to control the movement of industrial valves, especially in pneumatic and hydraulic systems. It allows bidirectional...
€105.85
(tax excl.)
€128.08
(tax included)
A single-acting actuator with a 3-piece, full-bore stainless steel valve is a robust and efficient fluid control solution for demanding industrial applications. Applications: Chemical and petrochemical industries,...
€88.80
(tax excl.)
€107.45
(tax included)
A double acting actuator with a 3-piece stainless steel full bore valve is used to control the flow of a fluid in a pipe. When compressed air is applied to the actuator, it moves the stem, which in turn opens or...
€26.00
(tax excl.)
€31.46
(tax included)
An electromechanical limit switch is a position sensing device that uses a mechanical mechanism to actuate an electrical switch.
Applications: Industrial automation, Machinery, Security systems, Elevators and lifts....
€123.79
(tax excl.)
€149.79
(tax included)
A single-acting actuator with a 3-way T-shaped stainless steel ball valve is a versatile and automated fluid control solution. Applications: Chemical and petrochemical industries, Food and beverage processes, Water...
€46.80
(tax excl.)
€56.63
(tax included)
The speed regulator for NAMUR actuators is designed for use in controlling the opening and closing speed of pneumatic actuators. It can be mounted directly to a pneumatic actuator or used with a Namur solenoid valve...
€48.00
(tax excl.)
€58.08
(tax included)
A three-way L-shaped stainless steel ball valve, ISO-5211, controls fluid flow in three directions: inlet, outlet, and shutoff. The L-shaped valve allows for right-angle flow, optimizing installation space. It...
€43.88
(tax excl.)
€53.09
(tax included)
The NPT stainless steel needle valve is ideal for controlling fluid flow with high precision. It features a corrosion-resistant stainless steel body and a fine needle that regulates fluid flow by manual rotation....
€48.00
(tax excl.)
€58.08
(tax included)
A 3-way T-port ISO-5211 stainless steel ball valve controls fluid flow in three directions: inlet, outlet, and shutoff. It also includes an ISO-5211 plate that facilitates the installation of a pneumatic or electric...
€21.60
(tax excl.)
€26.14
(tax included)
A 3-piece ISO 5211 stainless steel ball valve with flat plate is used to control fluid flow in two directions (opening and closing) with a full bore, allowing the fluid to flow freely without obstructions. The body...
€180.00
(tax excl.)
€217.80
(tax included)
The stainless steel safety valve, set at 5 bar, automatically releases system pressure when it exceeds 5 bar.
Applications: Hydraulic systems, pneumatic systems, boilers and industrial equipment.
Technical...
€55.00
(tax excl.)
€66.55
(tax included)
The stainless steel wafer butterfly valve with a disc is available with an optional flange for mounting on an ISO-5011 actuator. It is designed to control the flow of fluids (liquids or gases) through a pipeline. The...
€16.92
(tax excl.)
€20.47
(tax included)
The NPT PN-63 female stainless steel ball valve is used in hydraulic and fluid systems to control fluid flow in two directions (on and off). It consists of a stainless steel body, a female NPT thread for connection to...
€94.46
(tax excl.)
€114.30
(tax included)
The ANSI ISO-5211 flanged stainless steel ball valve is used to control fluid flow by means of a perforated sphere that rotates to open or close the passage of fluid. Applications: Chemical and petrochemical...
€15.30
(tax excl.)
€18.51
(tax included)
The 3-piece stainless steel ball valve is characterized by its robust construction, high-performance capacity, and corrosion resistance. Applications: Chemical and petrochemical industries, Food and beverage...
€152.87
(tax excl.)
€184.97
(tax included)
The ISO-5211 Wafer stainless steel ball valve is suitable for the control of aggressive fluids in demanding environments. Applications: Chemical and petrochemical industries, Food and beverage processes, Water...
€10.98
(tax excl.)
€13.29
(tax included)
The female stainless steel mini ball valve is used to control fluid flow in hydraulic, pneumatic, and general piping systems. The shutoff valve is a ball that rotates within a seat to open or close the flow of fluid....
€12.36
(tax excl.)
€14.96
(tax included)
A male-female stainless steel mini ball valve is used to control fluid flow in hydraulic, pneumatic, and general piping systems. The shutoff element is a ball that rotates within a seat to open or close the flow of...
€17.55
(tax excl.)
€21.24
(tax included)
The ISO-5211 2-piece stainless steel ball valve facilitates maintenance, cleaning and inspection thanks to its body composed of two joined parts.
Applications: Chemical and petrochemical industries, Food and beverage...
€56.80
(tax excl.)
€68.73
(tax included)
A 316 stainless steel quick release valve is used to accelerate the discharge of compressed air from a cylinder or other pneumatic actuator. Its purpose is to accelerate the return speed or movement of a pneumatic...
€51.00
(tax excl.)
€61.71
(tax included)
A stainless steel one-way flow regulator is designed to control and adjust airflow in pneumatic circuits. It allows flow to be regulated in one direction while maintaining free or less restricted flow in the opposite...
€16.33
(tax excl.)
€19.76
(tax included)
The stainless steel check valve is used to ensure that a liquid or gas flow is directed in one direction within a circuit and completely shuts off flow in the other direction. It is made entirely of stainless steel....
€36.92
(tax excl.)
€44.67
(tax included)
A DIN-11851 male weld-on butterfly valve is used to control the flow of a fluid (liquid or gas) in a pipe. By rotating the disc, the passage of the fluid can be opened or closed. Applications in industries such as...
€34.49
(tax excl.)
€41.73
(tax included)
The DIN-11851 sanitary butterfly valve for welding is a type of quarter-turn valve designed for sanitary applications where both ends of the valve are prepared to be welded to pipes or other components that also have...
€105.00
(tax excl.)
€127.05
(tax included)
The DIN-11851 male/female butterfly valve is a quarter-turn valve specifically designed for sanitary applications, commonly in the food, beverage, pharmaceutical, and biotechnology industries. It complies with DIN...
€110.00
(tax excl.)
€133.10
(tax included)
A DIN-11851 female-female sanitary butterfly valve is a type of quarter-turn valve designed for sanitary applications where both ends of the valve have a DIN 11851 female connection. They are used in industries such...
€39.40
(tax excl.)
€47.67
(tax included)
The DIN-11851 male-to-male sanitary butterfly valve is a type of quarter-turn valve used to control the flow of liquids and gases in pipes. It is characterized by a rotating disc (butterfly) that is actuated by a...
€180.00
(tax excl.)
€217.80
(tax included)
A DIN CLAMP sanitary butterfly valve is a type of quarter-turn valve designed specifically for sanitary applications that utilizes a CLAMP connection that meets the dimensional standards of DIN 32676. Applications:...
€180.00
(tax excl.)
€217.80
(tax included)
A CLAMP BS-4835 sanitary butterfly valve is used in most applications involving liquids and solids, and generally for non-obstructive liquids. The design facilitates installation and maintenance, allowing the valve to...
€56.25
(tax excl.)
€68.06
(tax included)
A 3/2 N.open stainless steel 1/8" 1/4" direct control solenoid valve is used in systems that control the flow of liquids or gases to direct the passage of a fluid.
Applications: Industrial automation, Food and...
€64.00
(tax excl.)
€77.44
(tax included)
A 3/2 N. closed 1/4" stainless steel direct control solenoid valve is an electromagnetic valve designed to control the flow of a fluid (typically compressed air) in low flow pneumatic or hydraulic systems....
€32.20
(tax excl.)
€38.96
(tax included)
A 3/2 N. closed 1/8" Inox direct control solenoid valve is used to control the flow of a fluid (usually compressed air) in pneumatic systems. It has 3 ways and 2 positions. The movement of the plunger that controls...
€61.00
(tax excl.)
€73.81
(tax included)
A 2/2 N. closed 1/4" stainless steel direct control solenoid valve is an electromagnetic valve designed to control the flow of a fluid (typically compressed air) in low flow pneumatic or hydraulic systems....
€89.00
(tax excl.)
€107.69
(tax included)
The DIN ISO-5211 flanged stainless steel ball valve is used to control fluid flow by means of a perforated sphere that rotates to open or close the passage of the fluid. Applications: Chemical and petrochemical...
€48.00
(tax excl.)
€58.08
(tax included)
A 2-way INOX hydraulic ball valve is a device that controls the flow of a fluid (oil or water) in hydraulic systems in two directions. Applications: hydraulic cylinders, hydraulic motors, hydraulic control circuits,...
€65.00
(tax excl.)
€78.65
(tax included)
The manual 6-way hydraulic diverter valve is a control component in a hydraulic system that allows the operator to manually redirect the flow of a hydraulic fluid (usually oil) from one line to another or to a...
What are stainless steel valves?
Stainless steel valves are devices designed to regulate, direct or cut off the flow of fluids (liquids or gases) in a system, manufactured totally or partially in stainless steel, a material characterized by its high resistance to corrosion, durability and ease of cleaning.
Stainless steel valves are especially suitable for working in aggressive or demanding environments, where there may be humidity, chemicals, high temperatures or strict hygiene requirements.
What types of stainless steel manual valves do we have available?
We could select the types of stainless steel valves from:
- Ball valves, also known as sphere valves , are a type of stopcock used to regulate the flow of a fluid in a pipe. They are characterized by an internal regulating mechanism in the form of a perforated sphere. A Teflon gasket ensures a tight seal.
- Butterfly valves: A butterfly valve is a device for interrupting or regulating the flow of a fluid in a pipe by increasing or decreasing the cross-sectional area of the flow using a plate or disc, called a "butterfly," that rotates on an axis. By decreasing the flow area, the local pressure drop across the valve increases, reducing the flow. The closure mechanism varies depending on the fluid being circulated. It can be made of EPDM, NBR, or PTFE.
What are the applications of stainless steel valves?
These valves are widely used in industries such as food, pharmaceutical, chemical, water treatment, marine or petrochemical, where it is essential to prevent fluid contamination and ensure a long equipment lifespan.
What technical parameters should be considered when selecting a stainless steel valve?
- Working pressure (PN)
- Serving temperature
- Type of fluid (corrosiveness, viscosity)
- Nominal diameter (DN)
- Connection type (thread, flange, clamp)
- Drive system (manual, pneumatic, electric)
Are stainless steel valves suitable for food use?
Yes, provided they comply with specific regulations (such as FDA or CE 1935/2004) and are manufactured from suitable materials such as AISI 316 with sanitary finishes.
