WAFER DISC BUTTERFLY VALVE STAINLESS STEEL | Buy online at the best price.

WAFER BUTTERFLY VALVE STAINLESS STEEL DISC

The stainless steel wafer butterfly valve with a disc is available with an optional flange for mounting on an ISO-5011 actuator. It is designed to control the flow of fluids (liquids or gases) through a pipeline. The stainless steel disc provides greater resistance to corrosion and chemical agents.

Applications: food and pharmaceutical industry, chemical and petrochemical industry, water treatment, paper industry, construction.

Technical specifications:

Manufactured from GGG-40 nodular cast iron
Epoxy paint coating
AISI-316 stainless steel disc
Board at EPDM
PN-16 DIN PN10-16 ANSI 125-150
Max. temperature -20ºC / +120ºC
Working pressure from 2" to 10": 16 bar, 12": 10 bar
Flange for mounting on ISO-5011 actuator
Lever up to 10", 12" and 14" manual reducer.

FLANGE EN-1092-1-01A ISO STAINLESS STEEL TUBE

€15.25 (tax excl.)

€18.45 (tax incl.)

The EN-1092-1-01A ISO stainless steel pipe flange is used to join two elements in a piping system and to separate them easily, without the need for destructive operations. Technical sheet: Flange EN-1092-1-01A (Former...

EN-1092-1-01A FLANGE STAINLESS STEEL TUBE MM | Buy online at the best price.

FLANGE EN-1092-1-01A TUBE MM INOX

€15.25 (tax excl.)

€18.45 (tax incl.)

An EN-1092-1-01A stainless steel pipe flange is used to join two elements in a stainless steel piping system and to separate them easily, without the need for destructive operations. Applications: Chemical industry,...

SINGLE-ACTING PNEUMATIC ACTUATOR

€116.53 (tax excl.)

€141.00 (tax incl.)

Single acting pneumatic actuator. It is used for the control and regulation of butterfly, ball, gate valves, etc., with different maneuvers and diameters between DN 15 and DN 1000. External regulation of the opening...

DOUBLE EFFECT PNEUMATIC ACTUATOR TO AUTOMATE VALVES buy online

DOUBLE-ACTING PNEUMATIC ACTUATOR

€41.86 (tax excl.)

€50.65 (tax incl.)

Double acting pneumatic actuator External regulation of the opening of a wide range of models ranging from 9 to 48833 Nm. Polyester epoxy caps, chemical nickel shaft, AISI 316 body or hard anodized. They are used for...

8 other products in the same category:

One-Way Wafer Type Pneumatic Knife Gate Valve | Buy

WAFER TYPE UNIDIRECTIONAL PNEUMATIC KNIFE GATE VALVE

€238.42 (tax excl.)

€288.49 (tax incl.)

The wafer-type pneumatic one-way knife gate valve, also known as a gate or sluice gate, is suitable for liquids containing a maximum of 5% suspended solids. If used for gravity discharge of dry solids, it is...

IN-LINE TUBE PRESSURE REGULATOR | Buy online. Best price

IN-LINE PRESSURE REGULATOR FOR TUBE

€20.00 (tax excl.)

€24.20 (tax incl.)

An in-line pressure regulator for Ø6 and Ø8 tubing is used to reduce and maintain constant pressure in a fluid system (usually air) despite variations in inlet pressure. Used for compressed air, it allows only a...

MINI MALE-FEMALE BRASS BALL VALVE

€5.40 (tax excl.)

€6.53 (tax incl.)

A male-female mini brass ball valve is a compact flow control valve, designed for installation in systems with limited space. Applications: Sanitary and heating installations, Compressed air systems, Instrumentation...

3/2" Ø6" DISCONNECTION FITTING | Buy online at the best price

SECTIONING FITTING 3/2 Ø6

€16.36 (tax excl.)

€19.80 (tax incl.)

A 3/2" Ø6" shut-off fitting is a manual shut-off and relief valve integrated into a fitting body, designed to quickly isolate pressure from a section of the pneumatic circuit and bleed any remaining air. It has 3 ways...

1/8" SINGLE CONTACT | Buy online at the best price at Disumtec.com

SINGLE CONTACT 1/8"

€25.00 (tax excl.)

€30.25 (tax incl.)

Single contact 1/8" This is a small, specialized electrical connector for quickly and securely connecting cables or conductors with a diameter of 1/8 inch. Its compact design allows it to be used in tight spaces. It...

Stainless Steel Check Valve | Buy online at the best price

STAINLESS STEEL NON-RETURN VALVE

€16.33 (tax excl.)

€19.76 (tax incl.)

The stainless steel check valve is used to ensure that a liquid or gas flow is directed in one direction within a circuit and completely shuts off flow in the other direction. It is made entirely of stainless steel....

ONE WAY LOCK VALVE

€35.00 (tax excl.)

€42.35 (tax incl.)

One-way lock valve Locking valves are pneumatically piloted devices for controlling the movement of a cylinder. Mounted directly on the cylinder inlet and outlet, they allow the cylinder stroke to be blocked in the...

3/2 WAY DISCHARGE VALVE

€16.78 (tax excl.)

€20.30 (tax incl.)

A 3/2-way air relief valve is a pneumatic valve specifically designed to quickly release compressed air from a system or circuit to the atmosphere or a tank. It consists of three ports (an air inlet, an outlet, and an...