Click for more products.
No produts were found.

AUTOMATIC LUBRICATION ACCESSORIES

Filter By
€48.90 (tax excl.)
Universal calcium complex Lubricationcartridge NLGI class 0. Pressure 70 bar Temperature -30º / 140ºC. Volume 400 cm³ For NLGI class 2 oils and greases Minimum distribution volume 0.15 cm³ Volume per cycle 0.15 - 4.5...
€52.00 (tax excl.)
LUB Ka70 Food Oil Cartridge for Lubricus Food oil cartridge NSF-H1 No 127130 Synthetic base oil. Pressure 70 bar Temperature -30º / 100ºC. Volume 400 cm³ For NLGI class 2 oils and greases Minimum distribution volume...
€53.00 (tax excl.)
High performance Lubricationcartridge Li/Ca thickener Mineral oil base. Pressure 70 bar Temperature -30º / 150ºC. Volume 400 cm³ For oils and greases of NLGI class 0-1 Minimum distribution volume 0.15 cm³ Volume per...
€52.10 (tax excl.)
LUB-KA09 biological Lubricationcartridge for Lubricus automatic greaser Biological Lubricationcartridge. Ester base. Biodegradable. High water resistance. EP Properties Pressure 70 bar Temperature -40º / 120ºC. Volume...
€34.50 (tax excl.)
Universal LUB-KA-S-01 Li/Ca Lubricationcartridge based on mineral oil. For general lubrication. Pressure 50 bar. For Lubricus-S For general lubrication Temperature -30º / 120ºC. Volume 250 cm³ Weight without lubricant...
€53.60 (tax excl.)
NSF H1 reg food Lubricationcartridge No. 138985 Al thickener. Mineral oil base. Pressure 70 bar Temperature -20º / 160ºC. Volume 400 cm³ For NLGI Class 1 oils and greases Minimum distribution volume 0.15 cm³ Volume...
€60.40 (tax excl.)
PAO based PHS high temperature Lubricationcartridge Pressure 70 bar Temperature -40º / 160ºC. Volume 400 cm³ For NLGI class 2 oils and greases Minimum distribution volume 0.15 cm³ Volume per cycle 0.15 - 4.5 cm³...
€46.10 (tax excl.)
Universal LUB-KA01 Li/Ca Lubricationcartridge based on mineral oil. For general lubrication. Pressure 70 bar Temperature -30º / 120ºC. Volume 400 cm³ For NLGI class 2 oils and greases Minimum distribution volume 0.15...
€51.10 (tax excl.)
VG-68 viscosity oil cartridge MINERAL base oil. Pressure 70 bar Temperature -10º / 90ºC. Volume 400 cm³ For NLGI class 2 oils and greases Minimum distribution volume 0.15 cm³ Volume per cycle 0.15 - 4.5 cm³ CHECK THE...
€49.00 (tax excl.)
Universal Lithium Lubricationcartridge with Mineral-based MoS2. Pressure 70 bar Temperature -30º / 140ºC. Volume 400 cm³ For NLGI class 2 oils and greases Minimum distribution volume 0.15 cm³ Volume per cycle 0.15 -...
€4.50 (tax excl.)
High pressure tube made of PA-12 Ø 6x4 Served unfilled. Green or black color. Working pressure 90 bar. Temperature -40ºC / 80ºC Price per meter.
€1.00 (tax excl.)
M-6 Male Adapter Made of high resistance brass. Ideal for Lubricationpoints.
€252.00 (tax excl.)
Progressive Lubricationnipple The progressive systems are optimized for use in medium and small machinery, combining the greatest robustness with an unbeatable quality-price ratio for the construction industry,...
€82.40 (tax excl.)
Desiccant filters protect industrial equipment from contamination by moisture and contaminating particles. The fluid reservoirs of hydraulic and lubrication systems are always at risk of being contaminated by unwanted...
€1.60 (tax excl.)
Made of nickel-plated brass UNI-12164-5 Available for Ø4 and 6 mm. Pipe tolerance +/- 0.05 mm. Maximum working pressure 150 bar. Temperature -20 / 70ºC. Suitable for centralized lubrication circuits and high pressure...
€2.00 (tax excl.)
Made of nickel-plated brass UNI-12164-5 Available for Ø4 and 6 mm. Pipe tolerance +/- 0.05 mm. Maximum working pressure 150 bar. Temperature -20 / 70ºC. Suitable for centralized lubrication circuits and high pressure...
€3.60 (tax excl.)
Made of nickel-plated brass UNI-12164-5 Available for Ø4 and 6 mm. Pipe tolerance +/- 0.05 mm. Maximum working pressure 150 bar. Temperature -20 / 70ºC. Suitable for centralized lubrication circuits and high pressure...
€16.60 (tax excl.)
Ø25 Lubricationbrush Bristle length 45 mm. Synthetic polyamide bristles. Inlet thread 1/4" female
€18.90 (tax excl.)
Flat Lubricationbrush. Synthetic bristles. Aluminum body. For oil lubrication. Available in 4 sizes 25, 40, 70 and 100 mm. Inlet thread 1/4" female
€22.40 (tax excl.)
Flat Lubricationbrush, side entry. Synthetic bristles. For oil lubrication. Available in 3 sizes 40, 70 and 100 mm wide. Inlet thread 1/4" female
€86.30 (tax excl.)
Straight single chain lubricator sprocket. Open cell PU foam rollers punctually transfer lubricant to the surface of the roller chain flanges. The mechanical driving force of the rollers is guaranteed by a low-wear...
€118.50 (tax excl.)
Double chain lubricator sprocket. Open cell PU foam rollers punctually transfer lubricant to the surface of the roller chain flanges. The mechanical driving force of the rollers is guaranteed by a low-wear plastic...
€118.50 (tax excl.)
Open cell PU foam rollers punctually transfer lubricant to the surface of the roller chain flanges. The mechanical driving force of the rollers is guaranteed by a low-wear plastic sprocket. Chain lubrication sprockets...
€43.70 (tax excl.)
Lubrication sprocket. Made of polyurethane foam (open cell) Temperature -30ºC / 150ºC Max surface speed 5 m/s. Density 240 kg/m³ Suitable for Lubricationand oil. To select the module, take measurement. With the...
€47.60 (tax excl.)
With the Lubricus lubrication sprocket, an optimal tooth supply is guaranteed over long periods. The lubricant is supplied variably through the Lubricus lubrication system. The lubricant enters through the shaft and...
€47.60 (tax excl.)
Lubrication sprocket. Made of polyurethane foam (open cell) Temperature -30ºC / 150ºC Max surface speed 5 m/s. Density 240 kg/m³ Suitable for Lubricationand oil. To select the module, take the measurement as a...
€14.60 (tax excl.)
Support for single-point lubricators. Suitable for all models that have a 1/4 G-LUBE, SOLOLUBE, LUB-5 male outlet Made of stainless steel
€19.00 (tax excl.)
Battery for LUBRICUS B automatic oiler Lithium battery. Work capacity for 36 months. 3 Volts (6.0 Ah)
€60.90 (tax excl.)
The spliters distribute a uniform amount of lubricant at the exhaust points and are suitable even for NLGI grade 2 greases and also oils. The amount of lubricant transported by the system will be divided between 2, 3...
€60.90 (tax excl.)
The splitters distribute a uniform amount of lubricant to the exhaust points and are suitable for oil with a consistency greater than ISO VG-100. The amount of lubricant transported by the system will be divided...
€4.50 (tax excl.)
High pressure Lubricationfitting with threaded non-return valve. Instant fitting for high pressure. Suitable for water, oil and grease. Incorporates non-return valve Maximum pressure 150 bar Temperature -30 / 150 ºC...
€20.30 (tax excl.)
Connection cable for Lubricus LUB-V , LUB-C , LUB-D M-12 x 1 thread, free end. 4-pole, A-coded. Possibility between 5 mt. and 10 mt. Polyurethane Cable. Resistant to oils and coolants. Protection IP-67, IP-68, IP-69K
Showing 1-38 of 38 item(s)

Automatic lubrication accessories are elements and devices that are used to automatically apply lubricant to different lubrication points of a machine or equipment. These accessories are very useful for maintaining constant and adequate lubrication of machinery, which reduces wear and extends the useful life of components.

Some of the most common automatic lubrication accessories are:

  • Drip lubrication systems: These are systems that apply lubricant to the lubrication points through a constant drip. These systems can be adjustable to regulate the amount of lubricant supplied.
  • Circulation lubrication systems: These are systems that recirculate lubricant through machinery to lubricate moving components. These systems may include pumps, filters, and valves to control the quantity and quality of the lubricant.
  • Spray lubrication systems: These are systems that apply lubricant in the form of an aerosol or fine spray at the lubrication points. These systems can be useful for lubricating parts that are difficult to access or that require uniform application of the lubricant.
  • Injection lubrication systems: These are systems that supply lubricant through an injection nozzle at the lubrication points. These systems can be adjustable to control the amount and frequency of lubrication.
  • Centralized lubrication systems, also called progressive: It is a lubrication method used in industrial machinery to guarantee adequate and constant lubrication of moving parts. In a progressive lubrication system, a centralized lubrication pump supplies oil or Lubricationto a series of progressive valves. These valves are activated sequentially to deliver small amounts of lubricant to different lubrication points on the machinery, ensuring that each point receives the proper amount of lubrication. Progressive lubrication is used on machinery that has multiple lubrication points, which can be difficult to reach manually. This method ensures that each lubrication point receives the right amount of lubricant at the right time, helping to extend the life of the machinery and reduce the risk of errors.

All the elements of these systems that help automatic lubrication are:

Brushes, sprayers, progressive distributors, desiccant filters, high-pressure fittings for oils and greases, single and double lubrication pinions, gear wheels for different modules, straight or left-hand, among others.

It is also worth mentioning all the oils and greases, which are the fluid that actually lubricates the machines or equipment. They generally tend to have a consistency of up to NLGI 2. If the Lubricationis thicker, they do not usually work at optimal performance.

Read more

Menu

Settings