Click for more products.
No products were found.

STRAIGHT UNION HIGH PRESSURE THREADED PIPE

Straight union tube thread for high pressure

It is used to join two pipes in a high pressure line. Its straight design allows for an aligned connection of the pipes.

The union has a female thread on each end and is sealed with an O-ring or sealing ring providing a tight seal against leaks.

Applications: hydraulic systems, pneumatic systems, instrumentation or industrial machinery.

Technical data sheet:

  • Made of nickel-plated brass UNI-12164-5
  • Available for Ø4 and 6 mm.
  • Pipe tolerance +/- 0.05 mm.
  • Maximum working pressure 150 bar.
  • Temperature -20 / 70ºC.
  • Suitable for centralized lubrication circuits and high pressure pilot systems.
Read moreShow less
€1.94 (tax incl.)
€1.60 (tax excl.)
Tube diameter - Thread
  • Ø 4-M6
  • Ø 4-M8
  • Ø 4-M10
  • Ø 4-1/8
  • Ø 6-M6
  • Ø 6- M6x0.75
  • Ø 6-M8
  • Ø 6-M10
  • Ø 6-1/8
  • Ø 6-1/4
  • Ø 4 - 5/16
Reference:
17500006
Description

Straight union tube thread for high pressure

Read moreShow less
Product Details
17500006
Comments (0)
4 other products in the same category:
€3.60 (tax excl.)
€4.36 (tax incl.)
High pressure adjustable threaded elbow union It is used to join two pipes in a high pressure line and orient it at a 90 degree angle. The male thread is attached to a rotating body that allows the connection to be...
€2.00 (tax excl.)
€2.42 (tax incl.)
Made of nickel-plated brass UNI-12164-5 Available for Ø4 and 6 mm. Pipe tolerance +/- 0.05 mm. Maximum working pressure 150 bar. Temperature -20 / 70ºC. Suitable for centralized lubrication circuits and high pressure...
€4.50 (tax excl.)
€5.45 (tax incl.)
High pressure Lubricationfitting with threaded non-return valve. Instant fitting for high pressure. Suitable for water, oil and grease. Incorporates non-return valve Maximum pressure 150 bar Temperature -30 / 150 ºC...
€3.60 (tax excl.)
€4.36 (tax incl.)
High pressure straight pipe connection It is designed to join two lengths of pipe in a straight line and withstand high pressures without leaks. Applications: Hydraulic systems, Pneumatics, Chemical industry, Power...
Recently Viewed
€1.94 (tax incl.)
€1.60 (tax excl.)
Straight union tube thread for high pressure It is used to join two pipes in a high pressure line. Its straight design allows for an aligned connection of the pipes. The union has a female thread on each end and is...
€34.69 (tax excl.)
€41.97 (tax incl.)
An NG-6 blanking plate is used in hydraulic systems, specifically in NG-6 valve blocks. It is press-fitted into one of the cavities of an NG-6 block to seal a hydraulic port or passage. The O-rings are compressed,...
€13.82 (tax excl.)
€16.72 (tax incl.)
Simultaneity valve Y It is a pneumatic component that allows the passage of a fluid (usually compressed air) to a common outlet only when there is flow in both inlets. It consists of two inputs and one output....
€25.00 (tax excl.)
€30.25 (tax incl.)
The 2-position long cam selector allows you to select between two different positions using a long cam that is spring-loaded back to its initial position. Applications: Momentary start or stop pushbuttons, Actuation...

Menu

Settings