Click for more products.
No produts were found.
Click for more products.
No produts were found.

SIMULTANEOUS VALVE AND

Simultaneity valve Y
It is a pneumatic component that allows the passage of a fluid (usually compressed air) to a common outlet only when there is flow in both inlets.
It consists of two inputs and one output.
Applications: machine tools, industrial automation, security systems.
Technical data sheet:
  • Thread-G1/8
  • nominal-2.5mm
  • Flow rate 6 bar with p 1 bar-100 Nl/min
  • Pressures-Minimum pressure: 2 bar
  • Maximum pressure: 10 bar (1 MPa)
  • Temperatures-Minimum temperature: -10 °C
  • Maximum temperature: +60 °C
  • Material-Aluminum body
  • Stainless steel spring
  • Board at NBR
  • Internal walls in brass
  • Compatible fluids-Compressed air
€16.72 (tax included)
€13.82 (tax excl.)
SELECT THE THREAD
  • 1/8"
Reference:
15060004
Description
Simultaneity valve Y

Product Details
15060004
Comments
12 other products in the same category:
€48.00 (tax excl.)
€58.08 (tax included)
The cast iron wafer disc butterfly valve has the function of regulating the passage of liquids or gases through a pipe. Applications: Drinking and wastewater systems, Chemical and petrochemical industry, Food...
€60.00 (tax excl.)
€72.60 (tax included)
A polyamide sprayer acts as a venturi, together with pressurized air, projecting the liquid and creating a mist, with the ability to regulate the flow rate it produces. Applications: Gardening and agriculture,...
€22.43 (tax excl.)
€27.14 (tax included)
The 1/8" knob valve is used to control the flow of compressed air manually using a knob or handle that is turned to open or close the air flow. Applications: Industrial automation, Medical equipment, Robotics and...
€25.00 (tax excl.)
€30.25 (tax included)
Single contact 1/8" This is a small, specialized electrical connector for quickly and securely connecting cables or conductors with a diameter of 1/8 inch. Its compact design allows it to be used in tight spaces. It...
€5.50 (tax excl.)
€6.66 (tax included)
A 1/8" adjustable 13-18 bar safety valve without set point automatically releases the pressure of a system when it exceeds a preset and adjustable value between 13 and 18 bar. Applications: Pneumatic systems,...
€5.76 (tax excl.)
€6.97 (tax included)
A pipe ball valve is specifically designed to be installed directly into a piping system (rigid pipes) using a compression fitting. Its function is to completely open or close the flow of water by rotating a...
€35.05 (tax excl.)
€42.41 (tax included)
A 1/4" 90º lever valve is designed to control the flow of compressed air manually using a 90º turning lever. Applications: Industrial automation, Medical equipment, Robotics and Instrumentation. Technical data sheet:...
€1.68 (tax excl.)
€2.03 (tax included)
Manual purge. It is used to remove air, condensate or non-condensable gases from a system periodically and manually. It is essential in a wide variety of systems, from heating and cooling installations to industrial...
€55.00 (tax excl.)
€66.55 (tax included)
The stainless steel wafer butterfly valve with a disc is available with an optional flange for mounting on an ISO-5011 actuator. It is designed to control the flow of fluids (liquids or gases) through a pipeline. The...
€5.79 (tax excl.)
€7.01 (tax included)
Non-return valve, nickel-plated brass A nickel-plated brass non-return valve is a mechanical device that allows fluid to flow in only one direction and prevents its return, protecting installations and equipment....
€21.60 (tax excl.)
€26.14 (tax included)
A 3-piece ISO 5211 stainless steel ball valve with flat plate is used to control fluid flow in two directions (opening and closing) with a full bore, allowing the fluid to flow freely without obstructions. The body...
€8.83 (tax excl.)
€10.68 (tax included)
One-way flow regulator A one-way flow regulator is a device that allows fluid flow to be adjusted in only one direction, while ensuring free flow in the opposite direction thanks to a check valve. It is essential for...
Recently Viewed
€16.72 (tax included)
€13.82 (tax excl.)
Simultaneity valve Y It is a pneumatic component that allows the passage of a fluid (usually compressed air) to a common outlet only when there is flow in both inlets. It consists of two inputs and one output....
€336.60 (tax excl.)
€407.29 (tax included)
The 7" 4011 angle grinder is used for cutting, grinding, and polishing various materials, such as metal, concrete, and ceramics. The 7-inch cutting disc is attached to the grinder's spindle and is the main working...
€25.00 (tax excl.)
€30.25 (tax included)
A 5/2 push-button valve precisely controls the flow of compressed air by means of a push-button (push-button not included). It has 5 ways and 2 positions. Applications: Industrial automation, packaging, material...
€24.82 (tax excl.)
€30.03 (tax included)
An automatic filter purge replacement automatically removes condensation from the compressed air in the filters. This helps keep the filter functioning properly and prevents problems such as corrosion, airflow...
€25.00 (tax excl.)
€30.25 (tax included)
A 3-position locking long-cam selector allows you to select between three different positions using a long cam that locks in each position. To select a position, move the long cam until the locking mechanism locks it...
€21.03 (tax excl.)
€25.45 (tax included)
The retractable roller microvalve is a precision electromechanical component designed to control the flow of fluids (usually gases or liquids) in microfluidic systems. Its small size allows its integration into...

Menu