Click for more products.
No produts were found.

HYDRAULIC BASE PLATES

Filter By
€56.00 (tax excl.)
CETOP-5 NG-10 single base bottom outlet. Bottom outlet 1/2" (3/4") Made of Aluminum
€55.03 (tax excl.)
CETOP-5 NG-10 side exit single base plate. Side thread outlets 1/2" - 3/4" Made of aluminum.
€49.01 (tax excl.)
Blanking plate for NG-10 Made of F-114 steel Supplied with 4 O-rings.
€34.69 (tax excl.)
Blanking plate for NG-6 bases and blocks Made of F-114 steel Supplied without screws.
€39.20 (tax excl.)
CETOP-3 simple base plate for NG-6 solenoid valves Bottom thread outlets 3/8" Made of aluminum.
€34.75 (tax excl.)
CETOP-3 simple base plate for NG-6 solenoid valves Made of aluminum. Supplied without caps or screws. Side outlets 3/8" or 1/2" thread
€55.00 (tax excl.)
Block made of aluminum for NG-6 solenoid valves Size NG-6 Flow rate 40 l/min. Block of 1 to 8 positions. AB outlets 3/8" thread PT 1/2" inputs Maximum working pressure 350 bar.
€281.40 (tax excl.)
Block made of aluminum for NG-6 solenoid valves with pressure limiter and venting solenoid valve. Size NG-6 Flow rate 40 l/min. EV venting voltages 12V DC - 24V DC 220V AC Possibility of taking a pressure gauge. block...
€118.00 (tax excl.)
Block made of aluminum for NG-6 solenoid valves with limiter Size NG-6 Flow rate 40 l/min. Possibility of taking a pressure gauge. block of 1 to 8 positions. Built-in pressure limiting valve 50 to 215 bar. AB outlets...
Showing 1-9 of 9 item(s)

BASE PLATES FOR HYDRAULIC SOLENOID VALVES. Buy online at the best price

The base plates are elements responsible for distributing the oil flow to all the elements that can be mounted on them and be able to fix them to them for all types of valves under the NG-6, NG-10 and NG-16 standard. All brands that meet these standards can be mounted and are completely interchangeable, using 4 threaded screws.

The oleo-hydraulic base plates, apart from distributing the oil from the hydraulic pump to its cylinders or peripherals, through the solenoid valves, are also prepared to be able to install a pressure gauge and display the circuit pressure, a pressure relief valve can also be connected. safety or limiting, to prevent excess pressure that the hydraulic pump can give. We can also install a bypass solenoid valve depending on which circuits we need it.

The base plates can be simple, with a single position to install various sandwich-type components, such as pressure regulating or reducing valves, pressure limiting valves, single or double non-return valves and the solenoid valve itself, always in the modular system. NG-6, NG-10. Or they can have several stations, up to 10. Where the same valves described can be placed.

They are made of steel or aluminum. There are several models depending on each application need.

The inlets and outlets of the fluid, normally oil, can be lateral or vertical.

Base plates are used in all types of industries where great forces are required.

Read more

Menu

Settings