Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
NG-6 BLOCK WITH VENTING AND LIMITING GEAR
NG-6 BLOCK WITH VENTING AND LIMITING GEAR
NG-6 BLOCK WITH VENTING AND LIMITING GEAR
NG-6 BLOCK WITH VENTING AND LIMITING GEAR
NG-6 BLOCK WITH VENTING AND LIMITING GEAR
NG-6 BLOCK WITH VENTING AND LIMITING GEAR

NG-6 BLOCK WITH VENTING AND LIMITING GEAR

An NG-6 block with a vent and pressure relief valve is a modular component designed to efficiently and safely integrate multiple NG-6 solenoid valves into a hydraulic system. The vent valve allows for controlled pressure release in the system, preventing overpressure and damage. The pressure relief valve limits the maximum system pressure.

Applications: Machine tools, Pressing systems, Lifting systems, Mobile equipment, Industrial automation.

Technical sheet:

  • Size NG-6
  • Flow rate 40 l/min.
  • Made of aluminum.
  • EV venting voltages 12V DC - 24V DC 220V AC
  • Possibility of taking a pressure gauge.
  • block of 2 to 10 seats.
  • Built-in pressure relief valve 50 to 250 bar.
  • AB 3/8" threaded outlets
  • 1/2" PT inlets
  • Maximum working pressure 350 bar.
€340.49 (tax included)
€281.40 (tax excl.)
OUTPUT TYPE
  • 2 POSITIONS
  • 3 POSITIONS
  • 4 POSITIONS
  • 5 POSITIONS
  • 6 POSITIONS
  • 7 POSITIONS
  • 8 POSITIONS
  • 9 POSITIONS
  • 10 POSITIONS
VOLTAGE/VOLUME
  • 12V DC
  • 24V DC
  • 220VAC
Reference:
47240026
Description

NG-6 block with venting and limiter.

BLOQUE NG-6 EV. VENTING Y LIMITADORA

Product Details
47240026
Comments
8 other products in the same category:
NG-6 BLOCK WITH LIMITER

€118.00 (tax excl.)
€142.78 (tax included)
An NG-6 manifold with a pressure relief valve is used to safely and efficiently mount and control multiple NG-6 solenoid valves. This type of manifold incorporates a pressure relief valve, making it an ideal solution...
NG-10 SIDE BASE PLATE

€75.03 (tax excl.)
€90.79 (tax included)
A lateral NG-10 base plate serves as a mounting and connection interface for solenoid valves and other NG-10 (CETOP 5) sized hydraulic components. Connection ports for hydraulic lines are located on the sides of the...
NG-6 BLINDING PLATE

€34.69 (tax excl.)
€41.97 (tax included)
An NG-6 blanking plate is used in hydraulic systems, specifically in NG-6 valve blocks. It is pressed into one of the cavities of an NG-6 block to seal a hydraulic port or passage. The O-rings are compressed, ensuring...
BASE PLATE NG-6 LOWER OUTLET

€49.20 (tax excl.)
€59.53 (tax included)
The NG-6 bottom outlet base plate serves as a support and connection for one or more NG-6 solenoid valves. On this type of plate, the solenoid valves' fluid inlet and outlet connections are located on the bottom....
BASE PLATE NG-6 SIDE OUTLET

€44.75 (tax excl.)
€54.15 (tax included)
The NG-6 side outlet base plate in hydraulic systems serves as a support and connection for one or more NG-6 solenoid valves. The fluid inlet and outlet of the solenoid valves is located laterally. Definition: Made of...
NG-10 LOWER BASE PLATE

€82.00 (tax excl.)
€99.22 (tax included)
A lower NG-10 base plate serves as a mounting and connection point for solenoid valves and other hydraulic components that comply with the NG-10 (CETOP 5) standard. Connection ports for hydraulic lines are located on...
NG-6 ALUMINUM BLOCK

€55.00 (tax excl.)
€66.55 (tax included)
An NG-6 aluminum block is used to group and organize several valves into a single assembly. Applications: Machine tools, Pressing systems, Lifting systems, Mobile equipment, Industrial automation. Technical sheet:...
NG-10 BLINDING PLATE

€49.01 (tax excl.)
€59.30 (tax included)
An NG-10 blanking plate is a component used to close or seal an NG-10 (CETOP 5) port or connection in a hydraulic system. It prevents hydraulic fluid leaks and protects the port from contamination. Common...
Recently Viewed
NG-6 BLOCK WITH VENTING AND LIMITING GEAR

€340.49 (tax included)
€281.40 (tax excl.)
An NG-6 block with a vent and pressure relief valve is a modular component designed to efficiently and safely integrate multiple NG-6 solenoid valves into a hydraulic system. The vent valve allows for controlled...
AUTOMATIC ELECTRONIC PURGE VALVE

€39.00 (tax excl.)
€47.19 (tax included)
The electronic automatic drain valve programs the frequency and duration of drains using an electronic timer for condensate discharge. It operates automatically and wastes less air when draining. It adapts to any type...
PIPE ELBOW CONNECTION WALL GATEWAY DIN-2353 S

€9.47 (tax excl.)
€11.46 (tax included)
DIN-2353 S pipe elbow fitting Operating temperature -20 / 120°C. Made of drawn steel DIN3859-1. Bichromated coating ISO 4042. Corrosion resistance. Work pressures 6-8-10-12-14 600 bar. 16-20-25-30 400 bar . 38,315...
P FIRING PIN COIL

€44.10 (tax excl.)
€53.36 (tax included)
The P-coil is an electrical component found in hammer drills. It is responsible for generating the electric current that powers the drill motor. It is an important component of the hammer drill. If the coil is...
COMPRESSED AIR BOILER

€37.86 (tax excl.)
€45.81 (tax included)
A compressed air tank is a pressure vessel designed to store compressed air. This compressed air is generated by a compressor and stored in the tank, serving as a reserve of pneumatic energy. Compressed air boilers...
ANTENNA ACTUATED VALVE

€32.00 (tax excl.)
€38.72 (tax included)
The antenna actuated valve is manually actuated by a lever or button, commonly known as an "antenna". It is available in 3/2-way, which consists of three ports, with one inlet and two outlets. When activated, they...

Menu

Please sign in first.

Sign in