NG-6 Aluminum Block | Buy online at the best price

NG-6 ALUMINUM BLOCK

An NG-6 aluminum block is used to group and organize several valves into a single assembly.

Applications: Machine tools, Pressing systems, Lifting systems, Mobile equipment, Industrial automation.

Technical sheet:

Size NG-6
Flow rate 40 l/min.
Block of 1 to 8 seats.
AB 3/8" threaded outlets
1/2" PT inlets
Maximum working pressure 350 bar.

NG-6 SOLENOID VALVE OPEN CLOSED

€40.00 (tax excl.)

€48.40 (tax incl.)

An open-closed NG-6 solenoid valve is used to control the flow of pressurized oil. It is activated by an electrical signal, usually an electromagnetic coil. It has two positions: open and closed. Applications: Machine...

SOLENOID VALVE NG-6 4/2 PARALLEL CROSS

€40.00 (tax excl.)

€48.40 (tax incl.)

A 4/2 parallel crossover NG-6 solenoid valve precisely controls the flow of pressurized oil. It has four ports and two positions (open and closed). Applications: Hydraulic circuits, Machine tools, Pressing systems,...

NG-6 4/3" P-T CENTER SOLENOID VALVE | Buy online at the best price.

SOLENOID VALVE NG-6 4/3 CENTER P-T

€49.00 (tax excl.)

€59.29 (tax incl.)

The NG-6 4/3 PT center solenoid valve is used to precisely control the flow of pressurized oil. It has four ports and three possible positions. In the center position, ports P and T are connected, while ports A and B...

NG-6 BLANK PLATE

€34.69 (tax excl.)

€41.97 (tax incl.)

An NG-6 blanking plate is used in hydraulic systems, specifically in NG-6 valve blocks. It is press-fitted into one of the cavities of an NG-6 block to seal a hydraulic port or passage. The O-rings are compressed,...

BUNA METAL GASKET

€0.21 (tax excl.)

€0.25 (tax incl.)

metal gasket The Metal Buna gasket is a sealing element composed of an outer metal ring and an inner elastomer (NBR) ring. It is used to achieve a watertight seal in threaded and flanged joints. The main function of...

MALE-TO-MALE JOINT FITTING

€0.55 (tax excl.)

€0.67 (tax incl.)

Male-to-male splice fitting A male-to-male coupling is used in hydraulic systems to directly join two male pipes or hoses, allowing the flow of hydraulic fluid between them. The male threads are screwed into the...

8 other products in the same category:

BASE PLATE NG-6 LOWER OUTLET

€49.20 (tax excl.)

€59.53 (tax incl.)

The NG-6 bottom outlet base plate serves as a support and connection for one or more NG-6 solenoid valves. On this type of plate, the fluid inlet and outlet connections of the solenoid valves are located on the...

NG-6 BLANK PLATE

€34.69 (tax excl.)

€41.97 (tax incl.)

NG-6 BLOCK WITH LIMITER

€118.00 (tax excl.)

€142.78 (tax incl.)

An NG-6 manifold with a pressure relief valve is used to safely and efficiently mount and control multiple NG-6 solenoid valves. This type of manifold incorporates a pressure relief valve, making it an ideal solution...

NG-10 BLANK PLATE

€49.01 (tax excl.)

€59.30 (tax incl.)

An NG-10 blanking plate is a component used to close or seal an NG-10 (CETOP 5) port or connection in a hydraulic system. It prevents hydraulic fluid leaks and protects the port from contamination. Common...

NG-10 LOWER MOTHERBOARD | Buy Online at the Best Price

NG-10 LOWER BASE PLATE

€82.00 (tax excl.)

€99.22 (tax incl.)

A lower NG-10 base plate serves as a mounting and connection point for solenoid valves and other hydraulic components that comply with the NG-10 (CETOP 5) standard. Connection ports for hydraulic lines are located on...

NG-10 SIDE MOTHERBOARD | Buy Online at the Best Price

NG-10 SIDE BASE PLATE

€75.03 (tax excl.)

€90.79 (tax incl.)

A lateral NG-10 base plate serves as a mounting and connection interface for solenoid valves and other NG-10 (CETOP 5) sized hydraulic components. Connection ports for hydraulic lines are located on the sides of the...

NG-6 BLOCK WITH VENTING AND LIMITING SYSTEM | Buy online

NG-6 BLOCK WITH VENTING AND LIMITING GEAR

€281.40 (tax excl.)

€340.49 (tax incl.)

An NG-6 block with a vent and pressure relief valve is a modular component designed to efficiently and safely integrate multiple NG-6 solenoid valves into a hydraulic system. The vent valve allows for controlled...

NG-6 MOTHERBOARD WITH SIDE EXIT | Buy online

BASE PLATE NG-6 SIDE OUTLET

€44.75 (tax excl.)

€54.15 (tax incl.)

The NG-6 side outlet base plate in hydraulic systems serves as a support and connection for one or more NG-6 solenoid valves. The fluid inlet and outlet of the solenoid valves is located laterally. Definition: Made of...