Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
NG-6 SOLENOID VALVE OPEN CLOSED

NG-6 SOLENOID VALVE OPEN CLOSED

An open-closed NG-6 solenoid valve is used to control the flow of pressurized oil. It is activated by an electrical signal, usually an electromagnetic coil. It has two positions: open and closed.

Applications: Machine tools, Pressing systems, Lifting systems, Injection machines and Mobile equipment.

Technical data sheet:

  • CETOP-3 NG-6
  • Maximum pressure 315 bar.
  • Flow rate 80 l/min.
  • Available voltages 12Vdc - 24Vdc - 24Vac - 220V ac - 110Vac
  • Includes 4 screws for fixing to the base plate.

Supplied without coil

€48.40 (tax included)
€40.00 (tax excl.)
Reference:
4707
Description

NG-6 solenoid valve open closed.

Product Details
4707
Comments
Related products
BASE PLATE NG-6 LOWER OUTLET BASE PLATE NG-6 LOWER OUTLET

€49.20 (tax excl.)
€59.53 (tax included)
The NG-6 bottom outlet base plate serves as a support and connection for one or more NG-6 solenoid valves. On this type of plate, the solenoid valves' fluid inlet and outlet connections are located on the bottom....
NG-6 SOLENOID VALVE COIL NG-6 SOLENOID VALVE COIL

€23.22 (tax excl.)
€28.10 (tax included)
The NG-6 solenoid valve coil is located inside an NG-6 hydraulic solenoid valve. Its function is to convert electrical energy into magnetic energy to actuate an internal mechanism and, in this way, control the flow of...
NG-10 SIDE BASE PLATE NG-10 SIDE BASE PLATE

€75.03 (tax excl.)
€90.79 (tax included)
A lateral NG-10 base plate serves as a mounting and connection interface for solenoid valves and other NG-10 (CETOP 5) sized hydraulic components. Connection ports for hydraulic lines are located on the sides of the...
NG-6 BLOCK WITH VENTING AND LIMITING GEAR NG-6 BLOCK WITH VENTING AND LIMITING GEAR

€281.40 (tax excl.)
€340.49 (tax included)
An NG-6 block with a vent and pressure relief valve is a modular component designed to efficiently and safely integrate multiple NG-6 solenoid valves into a hydraulic system. The vent valve allows for controlled...
DIN-43650-A LED T-30 CONNECTOR DIN-43650-A LED T-30 CONNECTOR

€6.00 (tax excl.)
€7.26 (tax included)
The DIN-43650-A LED T-30 Connector is an electrical component designed for the fast and safe connection of cables in industrial and commercial applications. Applications: Machine control systems, outdoor lighting,...
12 other products in the same category:
BASE PLATE NG-6 SIDE OUTLET

€44.75 (tax excl.)
€54.15 (tax included)
The NG-6 side outlet base plate in hydraulic systems serves as a support and connection for one or more NG-6 solenoid valves. The fluid inlet and outlet of the solenoid valves is located laterally. Definition: Made of...
SOLENOID VALVE NG-6 4/3 CENTER H

€47.00 (tax excl.)
€56.87 (tax included)
An NG-6 4/3 center-h solenoid valve is used to precisely control the flow of pressurized oil. It is designed to operate in demanding industrial environments and withstand high pressures. It has four ports and three...
MANUAL EMERGENCY POSITIONER

€35.00 (tax excl.)
€42.35 (tax included)
The manual emergency positioner is a system that can be used to move the slide of an NG-6 solenoid valve using the threaded push button that acts on the emergency button. It is mainly used when we have no voltage in...
SOLENOID VALVE NG-6 4/3 CENTER A-B-T

€47.00 (tax excl.)
€56.87 (tax included)
An ABT NG-6 4/3 center-mounted solenoid valve precisely controls the flow of pressurized oil. It has four ports and three positions. In the center position, ports A, B, and T are connected, enabling specific...
SOLENOID VALVE NG-6 4/2 CROSS H

€40.00 (tax excl.)
€48.40 (tax included)
An NG-6 4/2 H-type crossover solenoid valve is used to precisely control the flow of pressurized oil. It has four ports and two positions: open and closed. The H-type crossover configuration, along with the valve's...
NG-6 BLOCK WITH VENTING AND LIMITING GEAR

€281.40 (tax excl.)
€340.49 (tax included)
An NG-6 block with a vent and pressure relief valve is a modular component designed to efficiently and safely integrate multiple NG-6 solenoid valves into a hydraulic system. The vent valve allows for controlled...
SOLENOID VALVE NG-6 4/2 PARALLEL CROSS

€40.00 (tax excl.)
€48.40 (tax included)
A 4/2 parallel crossover NG-6 solenoid valve precisely controls the flow of pressurized oil. It has four ports and two positions (open and closed). Applications: Hydraulic circuits, Machine tools, Pressing systems,...
NG-6 BLOCK WITH LIMITER

€118.00 (tax excl.)
€142.78 (tax included)
An NG-6 manifold with a pressure relief valve is used to safely and efficiently mount and control multiple NG-6 solenoid valves. This type of manifold incorporates a pressure relief valve, making it an ideal solution...
REXROTH R933000030 12VDC COIL

€20.00 (tax excl.)
€24.20 (tax included)
The Rexroth R933000030 12VDC coil is an electromechanical component used in hydraulic valves. Its function is to activate or deactivate oil flow in a hydraulic circuit upon receiving an electrical signal....
SOLENOID VALVE NG-6 4/3 CENTER P-T

€49.00 (tax excl.)
€59.29 (tax included)
The NG-6 4/3 PT center solenoid valve is used to precisely control the flow of pressurized oil. It has four ports and three possible positions. In the center position, ports P and T are connected, while ports A and B...
BASE PLATE NG-6 LOWER OUTLET

€49.20 (tax excl.)
€59.53 (tax included)
The NG-6 bottom outlet base plate serves as a support and connection for one or more NG-6 solenoid valves. On this type of plate, the solenoid valves' fluid inlet and outlet connections are located on the bottom....
NG-6 BLINDING PLATE

€34.69 (tax excl.)
€41.97 (tax included)
An NG-6 blanking plate is used in hydraulic systems, specifically in NG-6 valve blocks. It is pressed into one of the cavities of an NG-6 block to seal a hydraulic port or passage. The O-rings are compressed, ensuring...
Recently Viewed
NG-6 SOLENOID VALVE OPEN CLOSED

€48.40 (tax included)
€40.00 (tax excl.)
An open-closed NG-6 solenoid valve is used to control the flow of pressurized oil. It is activated by an electrical signal, usually an electromagnetic coil. It has two positions: open and closed. Applications: Machine...
20x40 LIGHTWEIGHT STRUCTURAL ALUMINUM PROFILE

€20.51 (tax excl.)
€24.81 (tax included)
Lightweight structural 20x40 aluminum profile – 6 mm slot The 20x40 structural aluminum profile is a robust component made of high-strength anodized aluminum , ideal for the construction of frames, protections, frames...
WELDABLE ADJUSTMENT CONE

€0.62 (tax excl.)
€0.75 (tax included)
The weldable fitting cone is a hydraulic or pneumatic connection component designed to be permanently attached to a tube by welding at one end, while the other end features a polished spherical or conical geometry...

Menu

Please sign in first.

Sign in