Click for more products.
No products were found.

SOLENOID VALVE NG-6 4/3 CENTER H

An NG-6 4/3 center-h solenoid valve is used to precisely control the flow of pressurized oil. It is designed to operate in demanding industrial environments and withstand high pressures. It has four ports and three possible operating positions.

Applications: Machine tools, Pressing systems, Lifting systems, Mobile equipment, Industrial automation.

Technical sheet:

  • CETOP-3 NG-6
  • Maximum pressure 315 bar.
  • Flow rate 80 l/min.
  • Available voltages 12Vdc - 24Vdc - 24Vac - 220V ac - 110Vac
  • Supplied with 4 screws.

Supplied without coils

Read moreShow less
€56.87 (tax incl.)
€47.00 (tax excl.)
Reference:
4705
Description

NG-6 4/3 center H solenoid valve

Read moreShow less
Product Details
4705
Comments (0)
You may also like
€23.22 (tax excl.)
€28.10 (tax incl.)
The NG-6 solenoid valve coil is located inside an NG-6 hydraulic solenoid valve. Its function is to convert electrical energy into magnetic energy to actuate an internal mechanism and, in this way, control the flow of...
€6.00 (tax excl.)
€7.26 (tax incl.)
The DIN-43650-A LED T-30 Connector is an electrical component designed for the fast and safe connection of cables in industrial and commercial applications. Applications: Machine control systems, outdoor lighting,...
8 other products in the same category:
€20.00 (tax excl.)
€24.20 (tax incl.)
The Rexroth R933000030 12VDC coil is an electromechanical component used in hydraulic valves. Its function is to activate or deactivate oil flow in a hydraulic circuit upon receiving an electrical signal....
€281.40 (tax excl.)
€340.49 (tax incl.)
An NG-6 block with a vent and pressure relief valve is a modular component designed to efficiently and safely integrate multiple NG-6 solenoid valves into a hydraulic system. The vent valve allows for controlled...
€118.00 (tax excl.)
€142.78 (tax incl.)
An NG-6 manifold with a pressure relief valve is used to safely and efficiently mount and control multiple NG-6 solenoid valves. This type of manifold incorporates a pressure relief valve, making it an ideal solution...
€23.22 (tax excl.)
€28.10 (tax incl.)
The NG-6 solenoid valve coil is located inside an NG-6 hydraulic solenoid valve. Its function is to convert electrical energy into magnetic energy to actuate an internal mechanism and, in this way, control the flow of...
€49.20 (tax excl.)
€59.53 (tax incl.)
The NG-6 bottom outlet base plate serves as a support and connection for one or more NG-6 solenoid valves. On this type of plate, the fluid inlet and outlet connections of the solenoid valves are located on the...
€55.00 (tax excl.)
€66.55 (tax incl.)
An NG-6 aluminum block is used to group and organize several valves into a single assembly. Applications: Machine tools, Pressing systems, Lifting systems, Mobile equipment, Industrial automation. Technical sheet:...
€34.69 (tax excl.)
€41.97 (tax incl.)
An NG-6 blanking plate is used in hydraulic systems, specifically in NG-6 valve blocks. It is press-fitted into one of the cavities of an NG-6 block to seal a hydraulic port or passage. The O-rings are compressed,...
€35.00 (tax excl.)
€42.35 (tax incl.)
The manual emergency positioner is a system that can be used to move the slide of an NG-6 solenoid valve using the threaded push button that acts on the emergency button. It is mainly used when we have no voltage in...
Recently Viewed
€56.87 (tax incl.)
€47.00 (tax excl.)
An NG-6 4/3 center-h solenoid valve is used to precisely control the flow of pressurized oil. It is designed to operate in demanding industrial environments and withstand high pressures. It has four ports and three...
€37.13 (tax excl.)
€44.93 (tax incl.)
The DIN-5463 splined shaft fixing hub is a mechanical component designed to ensure a secure and precise connection between splined shafts and transmission elements. Applications: industrial machinery, mechanical...
€27.00 (tax excl.)
€32.67 (tax incl.)
The Prevost PPS-SQ Ø25 aluminium air profile is part of the Prevost Piping System-PPS range. It is available in blue or aluminium grey. The workstations are well supplied, accessible and ergonomic. The installation is...
€8.10 (tax excl.)
€9.80 (tax incl.)
Male swing rear bracket 90 Its function is to connect the cylinder to a structure or support in such a way that it allows angular movement. Applications: Industrial automation, Agricultural machinery, Medical...
€117.00 (tax excl.)
€141.57 (tax incl.)
25-pin IP-65 power cable for integrated multipolar Sub-D system Choice between 3 cable lengths: 3.5 or 10 meters. Simplicity and versatility of assembly and wiring. Double electric pilot, housed on the same side,...
€1.25 (tax excl.)
€1.51 (tax incl.)
A metric straight pipe union is a connector designed to quickly and securely connect flexible or semi-rigid tubing to a metric threaded component. It ensures the hygiene and safety standards required in the food and...

Menu

Settings