MANUAL EMERGENCY POSITIONER

The manual emergency positioner is a system that can be used to move the slide of an NG-6 solenoid valve using the threaded push button that acts on the emergency button.

It is mainly used when we have no voltage in the coil, so this device manually moves the solenoid valve.

It is used to manually control the position of a NG-6 hydraulic solenoid valve in the event of failure of the main control system.

€42.35 (tax included)

€35.00 (tax excl.)

PASSED

Reference:

4711

Description
Comments

Description

Manual emergency positioner

Product Details

Reference 4711

Comments

12 other products in the same category:

NG-6 BLOCK WITH VENTING AND LIMITING GEAR

€281.40 (tax excl.)

€340.49 (tax included)

An NG-6 block with a vent and pressure relief valve is a modular component designed to efficiently and safely integrate multiple NG-6 solenoid valves into a hydraulic system. The vent valve allows for controlled...

BASE PLATE NG-6 SIDE OUTLET

€44.75 (tax excl.)

€54.15 (tax included)

The NG-6 side outlet base plate in hydraulic systems serves as a support and connection for one or more NG-6 solenoid valves. The fluid inlet and outlet of the solenoid valves is located laterally. Definition: Made of...

SOLENOID VALVE NG-6 4/3 CLOSED CENTER

€47.00 (tax excl.)

€56.87 (tax included)

The NG-6 4/3 closed-center solenoid valve precisely controls the flow of pressurized oil. It has four ports and three possible positions. In the center position, all ports are isolated, preventing fluid flow. It is...

NG-6 SOLENOID VALVE OPEN CLOSED

€40.00 (tax excl.)

€48.40 (tax included)

An open-closed NG-6 solenoid valve is used to control the flow of pressurized oil. It is activated by an electrical signal, usually an electromagnetic coil. It has two positions: open and closed. Applications: Machine...

ATOS DH 0901/2 PNEUMATIC PILOT DISTRIBUTOR

€350.00 (tax excl.)

€423.50 (tax included)

An ATOS DH 0901/2 pneumatic pilot operated distributor is a hydraulic directional valve designed to control the flow of oil in hydraulic systems. Applications: industrial machinery, mobile equipment, automation...

DIN-43650-A LED T-30 CONNECTOR

€6.00 (tax excl.)

€7.26 (tax included)

The DIN-43650-A LED T-30 Connector is an electrical component designed for the fast and safe connection of cables in industrial and commercial applications. Applications: Machine control systems, outdoor lighting,...

SOLENOID VALVE NG-6 4/2 PARALLEL CROSS

€40.00 (tax excl.)

€48.40 (tax included)

A 4/2 parallel crossover NG-6 solenoid valve precisely controls the flow of pressurized oil. It has four ports and two positions (open and closed). Applications: Hydraulic circuits, Machine tools, Pressing systems,...

NG-6 BLINDING PLATE

€34.69 (tax excl.)

€41.97 (tax included)

An NG-6 blanking plate is used in hydraulic systems, specifically in NG-6 valve blocks. It is pressed into one of the cavities of an NG-6 block to seal a hydraulic port or passage. The O-rings are compressed, ensuring...

NG-6 BLOCK WITH LIMITER

€118.00 (tax excl.)

€142.78 (tax included)

An NG-6 manifold with a pressure relief valve is used to safely and efficiently mount and control multiple NG-6 solenoid valves. This type of manifold incorporates a pressure relief valve, making it an ideal solution...

NG-6 ALUMINUM BLOCK

€55.00 (tax excl.)

€66.55 (tax included)

An NG-6 aluminum block is used to group and organize several valves into a single assembly. Applications: Machine tools, Pressing systems, Lifting systems, Mobile equipment, Industrial automation. Technical sheet:...

SOLENOID VALVE NG-6 4/3 CENTER H

€47.00 (tax excl.)

€56.87 (tax included)

An NG-6 4/3 center-h solenoid valve is used to precisely control the flow of pressurized oil. It is designed to operate in demanding industrial environments and withstand high pressures. It has four ports and three...

SOLENOID VALVE NG-6 4/3 CENTER A-B-T

€47.00 (tax excl.)

€56.87 (tax included)

An ABT NG-6 4/3 center-mounted solenoid valve precisely controls the flow of pressurized oil. It has four ports and three positions. In the center position, ports A, B, and T are connected, enabling specific...