Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
ATOS DH 0901/2 PNEUMATIC PILOT DISTRIBUTOR

ATOS DH 0901/2 PNEUMATIC PILOT DISTRIBUTOR

An ATOS DH 0901/2 pneumatic pilot operated distributor is a hydraulic directional valve designed to control the flow of oil in hydraulic systems.

Applications: industrial machinery, mobile equipment, automation systems, hazardous environments.

Technical data sheet:

  • 4/2 directional valve
  • Double pneumatic piloting
  • Size NG-6 maximum flow rate 50 L/min
  • Maximum pressure 350 bar
  • Temperature -20/70ºC
  • NBR internal seals
  • Side safety control
€423.50 (tax included)
€350.00 (tax excl.)
Reference:
4714
Description

ATOS DH 0901/2 pneumatic pilot distributor

Product Details
4714
Comments
12 other products in the same category:
SOLENOID VALVE NG-6 4/2 PARALLEL CROSS

€40.00 (tax excl.)
€48.40 (tax included)
A 4/2 parallel crossover NG-6 solenoid valve precisely controls the flow of pressurized oil. It has four ports and two positions (open and closed). Applications: Hydraulic circuits, Machine tools, Pressing systems,...
SOLENOID VALVE NG-6 4/2 CROSS H

€40.00 (tax excl.)
€48.40 (tax included)
An NG-6 4/2 H-type crossover solenoid valve is used to precisely control the flow of pressurized oil. It has four ports and two positions: open and closed. The H-type crossover configuration, along with the valve's...
NG-6 BLINDING PLATE

€34.69 (tax excl.)
€41.97 (tax included)
An NG-6 blanking plate is used in hydraulic systems, specifically in NG-6 valve blocks. It is pressed into one of the cavities of an NG-6 block to seal a hydraulic port or passage. The O-rings are compressed, ensuring...
NG-6 SOLENOID VALVE OPEN CLOSED

€40.00 (tax excl.)
€48.40 (tax included)
An open-closed NG-6 solenoid valve is used to control the flow of pressurized oil. It is activated by an electrical signal, usually an electromagnetic coil. It has two positions: open and closed. Applications: Machine...
SOLENOID VALVE NG-6 4/3 CLOSED CENTER

€47.00 (tax excl.)
€56.87 (tax included)
The NG-6 4/3 closed-center solenoid valve precisely controls the flow of pressurized oil. It has four ports and three possible positions. In the center position, all ports are isolated, preventing fluid flow. It is...
MANUAL EMERGENCY POSITIONER

€35.00 (tax excl.)
€42.35 (tax included)
The manual emergency positioner is a system that can be used to move the slide of an NG-6 solenoid valve using the threaded push button that acts on the emergency button. It is mainly used when we have no voltage in...
SOLENOID VALVE NG-6 4/3 CENTER A-B-T

€47.00 (tax excl.)
€56.87 (tax included)
An ABT NG-6 4/3 center-mounted solenoid valve precisely controls the flow of pressurized oil. It has four ports and three positions. In the center position, ports A, B, and T are connected, enabling specific...
BASE PLATE NG-6 LOWER OUTLET

€49.20 (tax excl.)
€59.53 (tax included)
The NG-6 bottom outlet base plate serves as a support and connection for one or more NG-6 solenoid valves. On this type of plate, the solenoid valves' fluid inlet and outlet connections are located on the bottom....
NG-6 BLOCK WITH LIMITER

€118.00 (tax excl.)
€142.78 (tax included)
An NG-6 manifold with a pressure relief valve is used to safely and efficiently mount and control multiple NG-6 solenoid valves. This type of manifold incorporates a pressure relief valve, making it an ideal solution...
NG-6 ALUMINUM BLOCK

€55.00 (tax excl.)
€66.55 (tax included)
An NG-6 aluminum block is used to group and organize several valves into a single assembly. Applications: Machine tools, Pressing systems, Lifting systems, Mobile equipment, Industrial automation. Technical sheet:...
SOLENOID VALVE NG-6 4/3 CENTER P-T

€49.00 (tax excl.)
€59.29 (tax included)
The NG-6 4/3 PT center solenoid valve is used to precisely control the flow of pressurized oil. It has four ports and three possible positions. In the center position, ports P and T are connected, while ports A and B...
DIN-43650-A LED T-30 CONNECTOR

€6.00 (tax excl.)
€7.26 (tax included)
The DIN-43650-A LED T-30 Connector is an electrical component designed for the fast and safe connection of cables in industrial and commercial applications. Applications: Machine control systems, outdoor lighting,...
Recently Viewed
ATOS DH 0901/2 PNEUMATIC PILOT DISTRIBUTOR

€423.50 (tax included)
€350.00 (tax excl.)
An ATOS DH 0901/2 pneumatic pilot operated distributor is a hydraulic directional valve designed to control the flow of oil in hydraulic systems. Applications: industrial machinery, mobile equipment, automation...
ISO-2852 CLAMP

€4.79 (tax excl.)
€5.80 (tax included)
The ISO-2852 clamp , also known as Tri-Clamp, is a type of connection primarily used in the food, pharmaceutical, chemical, and biotechnology industries. It complies with ISO 2852, which establishes the requirements...
REXROTH R933000030 12VDC COIL

€20.00 (tax excl.)
€24.20 (tax included)
The Rexroth R933000030 12VDC coil is an electromechanical component used in hydraulic valves. Its function is to activate or deactivate oil flow in a hydraulic circuit upon receiving an electrical signal....
NG-6 SOLENOID VALVE OPEN CLOSED

€40.00 (tax excl.)
€48.40 (tax included)
An open-closed NG-6 solenoid valve is used to control the flow of pressurized oil. It is activated by an electrical signal, usually an electromagnetic coil. It has two positions: open and closed. Applications: Machine...
MURALT 500cc MANUAL GREASE PUMP 37540

€91.00 (tax excl.)
€110.11 (tax included)
A Muralt 500cc 37540 heavy-duty manual grease pump . It is used to grease parts requiring pressurized lubrication in machinery and mechanical components. The pump operates without the need for electricity or external...
MAXI FEMALE ADAPTER DN-9 ISO 6150 B-15

€2.40 (tax excl.)
€2.90 (tax included)
Maxi female adapter DN-9 ISO 6150 B-15 Used to join a hose or pneumatic component with a standard female thread to a quick connection system of the ISO 6150 B-15 type. It complies with ISO 6150, ensuring its...

Menu

Please sign in first.

Sign in