Click for more products.
No products were found.

SOLENOID VALVE NG-6 4/3 CENTER A-B-T

An ABT NG-6 4/3 center-mounted solenoid valve precisely controls the flow of pressurized oil. It has four ports and three positions. In the center position, ports A, B, and T are connected, enabling specific functions.

Applications: Machine tools, Pressing systems, Lifting systems, Mobile equipment, Industrial automation.

Technical sheet:

  • CETOP-3 NG-6
  • Maximum pressure 315 bar.
  • Flow rate 80 l/min.
  • Available voltages 12Vdc - 24Vdc - 24Vac - 220V ac - 110Vac
  • The 4 screws are included.

Supplied without coil

Read moreShow less
€56.87 (tax incl.)
€47.00 (tax excl.)
Reference:
4703
Description

NG-6 4/3 center ABT solenoid valve

Read moreShow less
Product Details
4703
Comments (0)
You may also like
€23.22 (tax excl.)
€28.10 (tax incl.)
The NG-6 solenoid valve coil is located inside an NG-6 hydraulic solenoid valve. Its function is to convert electrical energy into magnetic energy to actuate an internal mechanism and, in this way, control the flow of...
8 other products in the same category:
€35.00 (tax excl.)
€42.35 (tax incl.)
The manual emergency positioner is a system that can be used to move the slide of an NG-6 solenoid valve using the threaded push button that acts on the emergency button. It is mainly used when we have no voltage in...
€40.00 (tax excl.)
€48.40 (tax incl.)
An open-closed NG-6 solenoid valve is used to control the flow of pressurized oil. It is activated by an electrical signal, usually an electromagnetic coil. It has two positions: open and closed. Applications: Machine...
€20.00 (tax excl.)
€24.20 (tax incl.)
The Rexroth R933000030 12VDC coil is an electromechanical component used in hydraulic valves. Its function is to activate or deactivate oil flow in a hydraulic circuit upon receiving an electrical signal....
€118.00 (tax excl.)
€142.78 (tax incl.)
An NG-6 manifold with a pressure relief valve is used to safely and efficiently mount and control multiple NG-6 solenoid valves. This type of manifold incorporates a pressure relief valve, making it an ideal solution...
€350.00 (tax excl.)
€423.50 (tax incl.)
An ATOS DH 0901/2 pneumatic pilot operated distributor is a hydraulic directional valve designed to control the flow of oil in hydraulic systems. Applications: industrial machinery, mobile equipment, automation...
€44.75 (tax excl.)
€54.15 (tax incl.)
The NG-6 side outlet base plate in hydraulic systems serves as a support and connection for one or more NG-6 solenoid valves. The fluid inlet and outlet of the solenoid valves is located laterally. Definition: Made of...
€55.00 (tax excl.)
€66.55 (tax incl.)
An NG-6 aluminum block is used to group and organize several valves into a single assembly. Applications: Machine tools, Pressing systems, Lifting systems, Mobile equipment, Industrial automation. Technical sheet:...
€34.69 (tax excl.)
€41.97 (tax incl.)
An NG-6 blanking plate is used in hydraulic systems, specifically in NG-6 valve blocks. It is press-fitted into one of the cavities of an NG-6 block to seal a hydraulic port or passage. The O-rings are compressed,...
Recently Viewed
€56.87 (tax incl.)
€47.00 (tax excl.)
An ABT NG-6 4/3 center-mounted solenoid valve precisely controls the flow of pressurized oil. It has four ports and three positions. In the center position, ports A, B, and T are connected, enabling specific...
€5.39 (tax excl.)
€6.52 (tax incl.)
A DIN-6432 oscillating rear attachment is an accessory for pneumatic cylinders that comply with DIN ISO 6432. It allows the cylinder to oscillate in a given plane around a fixing point at its rear, while pushing or...
€32.78 (tax excl.)
€39.66 (tax incl.)
You tube male thread central stainless steel This type of T-shaped connection allows three pipes to be joined at a central point and a main pipe to branch in two directions. Applications: food industry, chemical...
€5.95 (tax excl.)
€7.20 (tax incl.)
The locking spring-loaded trigger head is used to control the release of energy stored in a spring. The trigger head acts as a holding and releasing mechanism. By activating the trigger head with a mechanical,...
€0.75 (tax excl.)
€0.91 (tax incl.)
The crimping ferrule for 2-braid hoses is a component for the manufacture and repair of hydraulic hoses. Designed for crimping, it ensures a secure connection between the double-braided metal hydraulic hose and the...
€27.00 (tax excl.)
€32.67 (tax incl.)
The Prevost PPS-SQ Ø25 aluminium air profile is part of the Prevost Piping System-PPS range. It is available in blue or aluminium grey. The workstations are well supplied, accessible and ergonomic. The installation is...

Menu

Settings