Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
NG-6 SOLENOID VALVE COIL
NG-6 SOLENOID VALVE COIL
NG-6 SOLENOID VALVE COIL
NG-6 SOLENOID VALVE COIL
NG-6 SOLENOID VALVE COIL
NG-6 SOLENOID VALVE COIL

NG-6 SOLENOID VALVE COIL

rating Read the review

The NG-6 solenoid valve coil is located inside an NG-6 hydraulic solenoid valve. Its function is to convert electrical energy into magnetic energy to actuate an internal mechanism and, in this way, control the flow of hydraulic fluid through the valve.

Technical data sheet:

  • IP-65 protection
  • DIN-43650-A connector
  • Available voltages 12VDC, 24vDC, 48VDC, 24VAC, 110VAC, 220VAC
  • The coils in 24VAC are served in DC current with RECTIFIER
  • See other voltages.
€28.10 (tax included)
€23.22 (tax excl.)
POWER
  • 12V DC
  • 24VAC
  • 24V DC
  • 110V AC
  • 220VAC
Reference:
47120002
Description

NG-6 solenoid valve coil

Product Details
47120002
Comments

   Opiniones

Todas las calificaciones proceden de clientes verificados que compraron este artículo. La valoración general es el promedio de todas las calificaciones recibidas.

very satisfied  rating
10
quick delivery
Related products
T-30 COIL CONNECTOR DIN-43650-A T-30 COIL CONNECTOR DIN-43650-A

€1.00 (tax excl.)
€1.21 (tax included)
A T-30 DIN-43650-A coil connector is an industrial electrical connector designed to establish a safe and reliable connection between a power or control source and the coil of an electromechanical device. The T-30...
DIN-43650-A LED T-30 CONNECTOR DIN-43650-A LED T-30 CONNECTOR

€6.00 (tax excl.)
€7.26 (tax included)
The DIN-43650-A LED T-30 Connector is an electrical component designed for the fast and safe connection of cables in industrial and commercial applications. Applications: Machine control systems, outdoor lighting,...
12 other products in the same category:
SOLENOID VALVE NG-6 4/3 CLOSED CENTER

€47.00 (tax excl.)
€56.87 (tax included)
The NG-6 4/3 closed-center solenoid valve precisely controls the flow of pressurized oil. It has four ports and three possible positions. In the center position, all ports are isolated, preventing fluid flow. It is...
NG-6 BLINDING PLATE

€34.69 (tax excl.)
€41.97 (tax included)
An NG-6 blanking plate is used in hydraulic systems, specifically in NG-6 valve blocks. It is pressed into one of the cavities of an NG-6 block to seal a hydraulic port or passage. The O-rings are compressed, ensuring...
SOLENOID VALVE NG-6 4/3 CENTER P-T

€49.00 (tax excl.)
€59.29 (tax included)
The NG-6 4/3 PT center solenoid valve is used to precisely control the flow of pressurized oil. It has four ports and three possible positions. In the center position, ports P and T are connected, while ports A and B...
DIN-43650-A LED T-30 CONNECTOR

€6.00 (tax excl.)
€7.26 (tax included)
The DIN-43650-A LED T-30 Connector is an electrical component designed for the fast and safe connection of cables in industrial and commercial applications. Applications: Machine control systems, outdoor lighting,...
SOLENOID VALVE NG-6 4/2 CROSS H

€40.00 (tax excl.)
€48.40 (tax included)
An NG-6 4/2 H-type crossover solenoid valve is used to precisely control the flow of pressurized oil. It has four ports and two positions: open and closed. The H-type crossover configuration, along with the valve's...
SOLENOID VALVE NG-6 4/2 PARALLEL CROSS

€40.00 (tax excl.)
€48.40 (tax included)
A 4/2 parallel crossover NG-6 solenoid valve precisely controls the flow of pressurized oil. It has four ports and two positions (open and closed). Applications: Hydraulic circuits, Machine tools, Pressing systems,...
REXROTH R933000030 12VDC COIL

€20.00 (tax excl.)
€24.20 (tax included)
The Rexroth R933000030 12VDC coil is an electromechanical component used in hydraulic valves. Its function is to activate or deactivate oil flow in a hydraulic circuit upon receiving an electrical signal....
ATOS DH 0901/2 PNEUMATIC PILOT DISTRIBUTOR

€350.00 (tax excl.)
€423.50 (tax included)
An ATOS DH 0901/2 pneumatic pilot operated distributor is a hydraulic directional valve designed to control the flow of oil in hydraulic systems. Applications: industrial machinery, mobile equipment, automation...
BASE PLATE NG-6 LOWER OUTLET

€49.20 (tax excl.)
€59.53 (tax included)
The NG-6 bottom outlet base plate serves as a support and connection for one or more NG-6 solenoid valves. On this type of plate, the solenoid valves' fluid inlet and outlet connections are located on the bottom....
NG-6 SOLENOID VALVE OPEN CLOSED

€40.00 (tax excl.)
€48.40 (tax included)
An open-closed NG-6 solenoid valve is used to control the flow of pressurized oil. It is activated by an electrical signal, usually an electromagnetic coil. It has two positions: open and closed. Applications: Machine...
BASE PLATE NG-6 SIDE OUTLET

€44.75 (tax excl.)
€54.15 (tax included)
The NG-6 side outlet base plate in hydraulic systems serves as a support and connection for one or more NG-6 solenoid valves. The fluid inlet and outlet of the solenoid valves is located laterally. Definition: Made of...
NG-6 ALUMINUM BLOCK

€55.00 (tax excl.)
€66.55 (tax included)
An NG-6 aluminum block is used to group and organize several valves into a single assembly. Applications: Machine tools, Pressing systems, Lifting systems, Mobile equipment, Industrial automation. Technical sheet:...
Recently Viewed
NG-6 SOLENOID VALVE COIL

€28.10 (tax included)
€23.22 (tax excl.)
The NG-6 solenoid valve coil is located inside an NG-6 hydraulic solenoid valve. Its function is to convert electrical energy into magnetic energy to actuate an internal mechanism and, in this way, control the flow of...
THREADED INLET WALL LIGHT WITH 2 OUTLETS

€32.00 (tax excl.)
€38.72 (tax included)
Wall light with threaded inlet and 2 outlets. It is a plumbing accessory designed to be mounted on a wall and divide a connection into two independent branches. Technical data sheet: Applicable in compressed air...
PNEUMATIC GREASE PUMP SPRAYING

€1,676.40 (tax excl.)
€2,028.44 (tax included)
Pneumatic Lubricationpump for spraying. The SPRAYMIST pump allows the spraying of different liquids in various jobs such as: metal machining, cooling of molds for rectification, lubrication of chains, bands and...
FIG.321 FLANGE WITH GALVANIZED DRILLS

€10.14 (tax excl.)
€12.27 (tax included)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard...

Menu

Please sign in first.

Sign in