Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.

NG-6 SOLENOID VALVE

Filter By
NG-6 OPEN CLOSED SOLENOID VALVE

NG-6 OPEN CLOSED SOLENOID VALVE

€48.40 (tax incl.)
€40.00 (tax excl.)
CETOP-3 NG-6 closed-cross center hydraulic solenoid valve. CETOP-3 NG-6 Maximum pressure 315 bar. Flow rate 80 l/min. Available voltages 12Vdc - 24Vdc - 24Vac - 220V ac - 110Vac SUPPLIED WITHOUT COIL Includes the 4...
SOLENOID VALVE NG-6 4/2 PARALLEL CROSS

SOLENOID VALVE NG-6 4/2 PARALLEL CROSS

€48.40 (tax incl.)
€40.00 (tax excl.)
Hydraulic solenoid valve NG-6 CETOP 3 CETOP-3 NG-6 Maximum pressure 315 bar. Flow rate 80 l/min. Available voltages 12Vdc - 24Vdc - 24Vac - 220V ac - 110Vac THE COIL IS NOT INCLUDED Supplied with 4 screws.
SOLENOID VALVE NG-6 4/2 CROSS - H

SOLENOID VALVE NG-6 4/2 CROSS - H

€48.40 (tax incl.)
€40.00 (tax excl.)
CETOP-3 NG-6 hydraulic solenoid valve CETOP-3 NG-6 Maximum pressure 315 bar. Flow rate 80 l/min. Available voltages 12Vdc - 24Vdc - 24Vac - 220V ac - 110Vac SUPPLIED WITHOUT COIL Includes the 4 fixing screws to the...
NG6 SOLENOID VALVE COIL

NG6 SOLENOID VALVE COIL

€28.10 (tax incl.)
€23.22 (tax excl.)
Coil for NG6 solenoid valves Protection IP-65 DIN-43650-A Connector Available voltages 12VDC, 24vDC, 48VDC, 24VAC, 110VAC, 220VAC Consult other voltages.
SOLENOID VALVE NG-6 4/3 CLOSED CENTER

SOLENOID VALVE NG-6 4/3 CLOSED CENTER

€56.87 (tax incl.)
€47.00 (tax excl.)
NG-6 CETP3 closed center solenoid valve CETOP-3 NG-6 Maximum pressure 315 bar. Flow rate 80 l/min. Available voltages 12Vdc - 24Vdc - 24Vac - 220V ac - 110Vac SUPPLIED WITHOUT COILS The 4 screws are included.
SOLENOID VALVE NG-6 4/3 CENTER P-T

SOLENOID VALVE NG-6 4/3 CENTER P-T

€59.29 (tax incl.)
€49.00 (tax excl.)
Hydraulic solenoid valve CETOP-3 NG6 center PT CETOP-3 NG-6 Maximum pressure 315 bar. Flow rate 80 l/min. Available voltages 12Vdc - 24Vdc - 24Vac - 220V ac - 110Vac SUPPLIED WITHOUT COIL Includes the 4 screws.
SOLENOID VALVE NG-6 4/3 CENTER H

SOLENOID VALVE NG-6 4/3 CENTER H

€56.87 (tax incl.)
€47.00 (tax excl.)
Solenoid valve NG6 CETOP-3 center H CETOP-3 NG-6 Maximum pressure 315 bar. Flow rate 80 l/min. Available voltages 12Vdc - 24Vdc - 24Vac - 220V ac - 110Vac Supplied with connector and 4 screws.
SOLENOID VALVE NG-6 4/3 CENTER A-B-T

SOLENOID VALVE NG-6 4/3 CENTER A-B-T

€56.87 (tax incl.)
€47.00 (tax excl.)
CETOP-3 NG6 hydraulic solenoid valve CETOP-3 NG-6 Maximum pressure 315 bar. Flow rate 80 l/min. Available voltages 12Vdc - 24Vdc - 24Vac - 220V ac - 110Vac SUPPLIED WITHOUT COILS The 4 screws are included.
DIN-43650-A LED T-30 CONNECTOR

DIN-43650-A LED T-30 CONNECTOR

DIN-43650-A connector with LED Contacts: Nut with protection for conductors. LED + Varistor Circuit Number of poles: 2 + Earth. Contact distance: 11 mm. Cable entry: PG7 – PG9. Lining: NBR profile (Different, upon...
NG-6 BLOCK WITH VENTING AND LIMITER

NG-6 BLOCK WITH VENTING AND LIMITER

€340.49 (tax incl.)
€281.40 (tax excl.)
Block made of aluminum for NG-6 solenoid valves with pressure limiter and venting solenoid valve. Size NG-6 Flow rate 40 l/min. EV venting voltages 12V DC - 24V DC 220V AC Possibility of taking a pressure gauge. block...
NG-6 ALUMINUM BLOCK

NG-6 ALUMINUM BLOCK

€66.55 (tax incl.)
€55.00 (tax excl.)
Block made of aluminum for NG-6 solenoid valves Size NG-6 Flow rate 40 l/min. Block of 1 to 8 positions. AB outlets 3/8" thread PT 1/2" inputs Maximum working pressure 350 bar.
SIDE NG-6 BASE PLATE

SIDE NG-6 BASE PLATE

€42.05 (tax incl.)
€34.75 (tax excl.)
CETOP-3 simple base plate for NG-6 solenoid valves Made of aluminum. Supplied without caps or screws. Side outlets 3/8" or 1/2" thread
BOTTOM NG-6 BASE PLATE

BOTTOM NG-6 BASE PLATE

€47.43 (tax incl.)
€39.20 (tax excl.)
CETOP-3 simple base plate for NG-6 solenoid valves Bottom thread outlets 3/8" Made of aluminum.
NG-6 BLIND PLATE

NG-6 BLIND PLATE

€41.97 (tax incl.)
€34.69 (tax excl.)
Blanking plate for NG-6 bases and blocks Made of F-114 steel Supplied without screws.
NG-6 BLOCK WITH LIMITER

NG-6 BLOCK WITH LIMITER

€142.78 (tax incl.)
€118.00 (tax excl.)
Block made of aluminum for NG-6 solenoid valves with limiter Size NG-6 Flow rate 40 l/min. Possibility of taking a pressure gauge. block of 1 to 8 positions. Built-in pressure limiting valve 50 to 215 bar. AB outlets...
REXROTH R933000030 12VDC COIL

REXROTH R933000030 12VDC COIL

€24.20 (tax incl.)
€20.00 (tax excl.)
Rexroth Coil R933000030 12 VDC Bonina for Rexroth solenoid valves Connection for deutch connector DT 04-2P C45 07 Resistance 4.24 Ohns Power 33 Watt Intensity 2.8 Amperes Class H
Showing 1-16 of 16 item(s)

The dimensions of the solenoid valves and the modular ones are according to ISO-4401 standards,
DIN-24340 and CETOP RP121H, thereby obtaining a perfect interchange with the majority of oil-hydraulic manufacturers on the market.
The main characteristics by size are the following:
In the CETOP-3 or NG6 models 315 bars and a flow rate of 80 liters/minute.
In CETOP-5 or NG10 models 315 bars and a flow rate of 100 liters/minute.
In the CETOP-7 or NG16 models 350 bars and a flow rate of 200 liters/minute.
In the CETOP-8 or NG25 models 350 bars and a flow rate of 350 liters/minute.
And in the CETOP -10 or NG32 models, 350 bars and a flow rate of 700 liters/minute.
We have a large assortment of base plates and top covers (NG-6, NG-10, NG16, NG-25 and NG32) to attach the elements separately and independently.
We also have a catalog of proportional hydraulics for drives in which a progression or recession of movement is needed.
Symbols according to ISO-1219 standard 713205 - NG6 SOLENOID VALVE BLOCK 5 ELEMENTS

Read more

Menu

Please sign in first.

Sign in