Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
SOLENOID VALVE NG-6 4/3 CLOSED CENTER
SOLENOID VALVE NG-6 4/3 CLOSED CENTER
SOLENOID VALVE NG-6 4/3 CLOSED CENTER
SOLENOID VALVE NG-6 4/3 CLOSED CENTER

SOLENOID VALVE NG-6 4/3 CLOSED CENTER

The NG-6 4/3 closed-center solenoid valve precisely controls the flow of pressurized oil. It has four ports and three possible positions. In the center position, all ports are isolated, preventing fluid flow.

It is normally applied in hydraulic circuits, machine tools, pressing systems, lifting systems.

Technical sheet:

  • CETOP-3 NG-6
  • Maximum pressure 315 bar.
  • Flow rate 80 l/min.
  • Available voltages 12Vdc - 24Vdc - 24Vac - 220V ac - 110Vac
  • The 4 screws are included.

Supplied without coils

€56.87 (tax included)
€47.00 (tax excl.)
Reference:
4702
Description

NG-6 4/3 closed center solenoid valve

Product Details
4702
Comments
Related products
NG-6 SOLENOID VALVE COIL NG-6 SOLENOID VALVE COIL

€23.22 (tax excl.)
€28.10 (tax included)
The NG-6 solenoid valve coil is located inside an NG-6 hydraulic solenoid valve. Its function is to convert electrical energy into magnetic energy to actuate an internal mechanism and, in this way, control the flow of...
DIN-43650-A LED T-30 CONNECTOR DIN-43650-A LED T-30 CONNECTOR

€6.00 (tax excl.)
€7.26 (tax included)
The DIN-43650-A LED T-30 Connector is an electrical component designed for the fast and safe connection of cables in industrial and commercial applications. Applications: Machine control systems, outdoor lighting,...
12 other products in the same category:
SOLENOID VALVE NG-6 4/2 CROSS H

€40.00 (tax excl.)
€48.40 (tax included)
An NG-6 4/2 H-type crossover solenoid valve is used to precisely control the flow of pressurized oil. It has four ports and two positions: open and closed. The H-type crossover configuration, along with the valve's...
NG-6 SOLENOID VALVE COIL

€23.22 (tax excl.)
€28.10 (tax included)
The NG-6 solenoid valve coil is located inside an NG-6 hydraulic solenoid valve. Its function is to convert electrical energy into magnetic energy to actuate an internal mechanism and, in this way, control the flow of...
NG-6 SOLENOID VALVE OPEN CLOSED

€40.00 (tax excl.)
€48.40 (tax included)
An open-closed NG-6 solenoid valve is used to control the flow of pressurized oil. It is activated by an electrical signal, usually an electromagnetic coil. It has two positions: open and closed. Applications: Machine...
BASE PLATE NG-6 SIDE OUTLET

€44.75 (tax excl.)
€54.15 (tax included)
The NG-6 side outlet base plate in hydraulic systems serves as a support and connection for one or more NG-6 solenoid valves. The fluid inlet and outlet of the solenoid valves is located laterally. Definition: Made of...
SOLENOID VALVE NG-6 4/3 CENTER P-T

€49.00 (tax excl.)
€59.29 (tax included)
The NG-6 4/3 PT center solenoid valve is used to precisely control the flow of pressurized oil. It has four ports and three possible positions. In the center position, ports P and T are connected, while ports A and B...
NG-6 BLOCK WITH LIMITER

€118.00 (tax excl.)
€142.78 (tax included)
An NG-6 manifold with a pressure relief valve is used to safely and efficiently mount and control multiple NG-6 solenoid valves. This type of manifold incorporates a pressure relief valve, making it an ideal solution...
NG-6 BLINDING PLATE

€34.69 (tax excl.)
€41.97 (tax included)
An NG-6 blanking plate is used in hydraulic systems, specifically in NG-6 valve blocks. It is pressed into one of the cavities of an NG-6 block to seal a hydraulic port or passage. The O-rings are compressed, ensuring...
SOLENOID VALVE NG-6 4/3 CENTER H

€47.00 (tax excl.)
€56.87 (tax included)
An NG-6 4/3 center-h solenoid valve is used to precisely control the flow of pressurized oil. It is designed to operate in demanding industrial environments and withstand high pressures. It has four ports and three...
REXROTH R933000030 12VDC COIL

€20.00 (tax excl.)
€24.20 (tax included)
The Rexroth R933000030 12VDC coil is an electromechanical component used in hydraulic valves. Its function is to activate or deactivate oil flow in a hydraulic circuit upon receiving an electrical signal....
NG-6 ALUMINUM BLOCK

€55.00 (tax excl.)
€66.55 (tax included)
An NG-6 aluminum block is used to group and organize several valves into a single assembly. Applications: Machine tools, Pressing systems, Lifting systems, Mobile equipment, Industrial automation. Technical sheet:...
SOLENOID VALVE NG-6 4/3 CENTER A-B-T

€47.00 (tax excl.)
€56.87 (tax included)
An ABT NG-6 4/3 center-mounted solenoid valve precisely controls the flow of pressurized oil. It has four ports and three positions. In the center position, ports A, B, and T are connected, enabling specific...
NG-6 BLOCK WITH VENTING AND LIMITING GEAR

€281.40 (tax excl.)
€340.49 (tax included)
An NG-6 block with a vent and pressure relief valve is a modular component designed to efficiently and safely integrate multiple NG-6 solenoid valves into a hydraulic system. The vent valve allows for controlled...
Recently Viewed
SOLENOID VALVE NG-6 4/3 CLOSED CENTER

€56.87 (tax included)
€47.00 (tax excl.)
The NG-6 4/3 closed-center solenoid valve precisely controls the flow of pressurized oil. It has four ports and three possible positions. In the center position, all ports are isolated, preventing fluid flow. It is...
5/2 MONOSTABLE VALVE VA14 1501C00001

€49.00 (tax excl.)
€59.29 (tax included)
A 5/2 monostable valve VA14 1501C00001 Technical sheet: Sub-D multipolar integrated system Simplicity and versatility of assembly and wiring. Double electropilot, housed on the same side, reducing the size of the...
90° SWING REAR FIXING BALL JOINT

€108.53 (tax excl.)
€131.33 (tax included)
The 90° swivel rear mounting bracket is a mounting accessory designed for the articulated installation of pneumatic cylinders. Its design allows for up to 90° of rotation, offering greater flexibility in applications...
MALE FITTING FOR SANITARY HOSE

€1.14 (tax excl.)
€1.38 (tax included)
Male fitting. Nickel-plated brass fitting. Nominal pressure 10 bar Max. temperature 90ºC
PREVOST S1 ISI06110 FEMALE SAFETY QUICK PLUG

€18.00 (tax excl.)
€21.78 (tax included)
Prevost S1 ISI06110 female safety quick coupling It is a specialized pneumatic component, designed to quickly and safely connect and disconnect compressed air lines. It is characterized by its high quality, long life,...
AND FEMALE MALE CENTRAL NICKEL-PLATED BRASS

€1.37 (tax excl.)
€1.66 (tax included)
A nickel-plated brass male-female Y fitting is a connecting element used in piping or conduit systems. Applications: Plumbing, Pneumatics, Low Pressure Hydraulics, Irrigation, Fluid Control Systems, Automotive...

Menu

Please sign in first.

Sign in