Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
SOLENOID VALVE NG-6 4/2 PARALLEL CROSS
SOLENOID VALVE NG-6 4/2 PARALLEL CROSS
SOLENOID VALVE NG-6 4/2 PARALLEL CROSS
SOLENOID VALVE NG-6 4/2 PARALLEL CROSS

SOLENOID VALVE NG-6 4/2 PARALLEL CROSS

A 4/2 parallel crossover NG-6 solenoid valve precisely controls the flow of pressurized oil. It has four ports and two positions (open and closed).

Applications: Hydraulic circuits, Machine tools, Pressing systems, Lifting systems.

Technical sheet:

  • CETOP-3 NG-6
  • Maximum pressure 315 bar.
  • Flow rate 80 l/min.
  • Available voltages 12Vdc - 24Vdc - 24Vac - 220V ac - 110Vac
  • Supplied with 4 screws.

Supplied without coil

€48.40 (tax included)
€40.00 (tax excl.)
Reference:
4700
Description

NG-6 4/2 parallel crossed solenoid valve

Product Details
4700
Comments
Related products
BASE PLATE NG-6 SIDE OUTLET BASE PLATE NG-6 SIDE OUTLET

€44.75 (tax excl.)
€54.15 (tax included)
The NG-6 side outlet base plate in hydraulic systems serves as a support and connection for one or more NG-6 solenoid valves. The fluid inlet and outlet of the solenoid valves is located laterally. Definition: Made of...
BASE PLATE NG-6 LOWER OUTLET BASE PLATE NG-6 LOWER OUTLET

€49.20 (tax excl.)
€59.53 (tax included)
The NG-6 bottom outlet base plate serves as a support and connection for one or more NG-6 solenoid valves. On this type of plate, the solenoid valves' fluid inlet and outlet connections are located on the bottom....
NG-6 SOLENOID VALVE COIL NG-6 SOLENOID VALVE COIL

€23.22 (tax excl.)
€28.10 (tax included)
The NG-6 solenoid valve coil is located inside an NG-6 hydraulic solenoid valve. Its function is to convert electrical energy into magnetic energy to actuate an internal mechanism and, in this way, control the flow of...
NG-6 BLOCK WITH VENTING AND LIMITING GEAR NG-6 BLOCK WITH VENTING AND LIMITING GEAR

€281.40 (tax excl.)
€340.49 (tax included)
An NG-6 block with a vent and pressure relief valve is a modular component designed to efficiently and safely integrate multiple NG-6 solenoid valves into a hydraulic system. The vent valve allows for controlled...
DIN-43650-A LED T-30 CONNECTOR DIN-43650-A LED T-30 CONNECTOR

€6.00 (tax excl.)
€7.26 (tax included)
The DIN-43650-A LED T-30 Connector is an electrical component designed for the fast and safe connection of cables in industrial and commercial applications. Applications: Machine control systems, outdoor lighting,...
12 other products in the same category:
NG-6 ALUMINUM BLOCK

€55.00 (tax excl.)
€66.55 (tax included)
An NG-6 aluminum block is used to group and organize several valves into a single assembly. Applications: Machine tools, Pressing systems, Lifting systems, Mobile equipment, Industrial automation. Technical sheet:...
BASE PLATE NG-6 LOWER OUTLET

€49.20 (tax excl.)
€59.53 (tax included)
The NG-6 bottom outlet base plate serves as a support and connection for one or more NG-6 solenoid valves. On this type of plate, the solenoid valves' fluid inlet and outlet connections are located on the bottom....
ATOS DH 0901/2 PNEUMATIC PILOT DISTRIBUTOR

€350.00 (tax excl.)
€423.50 (tax included)
An ATOS DH 0901/2 pneumatic pilot operated distributor is a hydraulic directional valve designed to control the flow of oil in hydraulic systems. Applications: industrial machinery, mobile equipment, automation...
BASE PLATE NG-6 SIDE OUTLET

€44.75 (tax excl.)
€54.15 (tax included)
The NG-6 side outlet base plate in hydraulic systems serves as a support and connection for one or more NG-6 solenoid valves. The fluid inlet and outlet of the solenoid valves is located laterally. Definition: Made of...
NG-6 BLINDING PLATE

€34.69 (tax excl.)
€41.97 (tax included)
An NG-6 blanking plate is used in hydraulic systems, specifically in NG-6 valve blocks. It is pressed into one of the cavities of an NG-6 block to seal a hydraulic port or passage. The O-rings are compressed, ensuring...
SOLENOID VALVE NG-6 4/3 CLOSED CENTER

€47.00 (tax excl.)
€56.87 (tax included)
The NG-6 4/3 closed-center solenoid valve precisely controls the flow of pressurized oil. It has four ports and three possible positions. In the center position, all ports are isolated, preventing fluid flow. It is...
NG-6 BLOCK WITH VENTING AND LIMITING GEAR

€281.40 (tax excl.)
€340.49 (tax included)
An NG-6 block with a vent and pressure relief valve is a modular component designed to efficiently and safely integrate multiple NG-6 solenoid valves into a hydraulic system. The vent valve allows for controlled...
DIN-43650-A LED T-30 CONNECTOR

€6.00 (tax excl.)
€7.26 (tax included)
The DIN-43650-A LED T-30 Connector is an electrical component designed for the fast and safe connection of cables in industrial and commercial applications. Applications: Machine control systems, outdoor lighting,...
SOLENOID VALVE NG-6 4/3 CENTER P-T

€49.00 (tax excl.)
€59.29 (tax included)
The NG-6 4/3 PT center solenoid valve is used to precisely control the flow of pressurized oil. It has four ports and three possible positions. In the center position, ports P and T are connected, while ports A and B...
REXROTH R933000030 12VDC COIL

€20.00 (tax excl.)
€24.20 (tax included)
The Rexroth R933000030 12VDC coil is an electromechanical component used in hydraulic valves. Its function is to activate or deactivate oil flow in a hydraulic circuit upon receiving an electrical signal....
NG-6 SOLENOID VALVE COIL

€23.22 (tax excl.)
€28.10 (tax included)
The NG-6 solenoid valve coil is located inside an NG-6 hydraulic solenoid valve. Its function is to convert electrical energy into magnetic energy to actuate an internal mechanism and, in this way, control the flow of...
NG-6 SOLENOID VALVE OPEN CLOSED

€40.00 (tax excl.)
€48.40 (tax included)
An open-closed NG-6 solenoid valve is used to control the flow of pressurized oil. It is activated by an electrical signal, usually an electromagnetic coil. It has two positions: open and closed. Applications: Machine...
Recently Viewed
SOLENOID VALVE NG-6 4/2 PARALLEL CROSS

€48.40 (tax included)
€40.00 (tax excl.)
A 4/2 parallel crossover NG-6 solenoid valve precisely controls the flow of pressurized oil. It has four ports and two positions (open and closed). Applications: Hydraulic circuits, Machine tools, Pressing systems,...
ONE-WAY KNOB FLOW REGULATOR

€23.80 (tax excl.)
€28.80 (tax included)
A one-way knob flow regulator is a valve designed to control the speed of an actuator by allowing free flow of fluid in one direction and restricting it in the opposite direction. Applications: Automation, robotics,...
M22x150 MALE - FEMALE ADAPTER

€6.50 (tax excl.)
€7.87 (tax included)
The M22x150 male to female adapter is primarily used in hydraulic systems, especially in high-pressure cleaning equipment such as pressure washers. It is used to connect different types of hoses, nozzles, and...
BUNA METAL GASKET

€0.21 (tax excl.)
€0.25 (tax included)
metal gasket The Metal Buna gasket is a sealing element composed of an outer metal ring and an inner elastomer (NBR) ring. It is used to achieve a watertight seal in threaded and flanged joints. The main function of...
Z-BELT

€3.61 (tax excl.)
€4.37 (tax included)
Z-belt The Z trapezoidal belt stands out for its high mechanical resistance and good working conditions at high and low temperatures. Suitable for all industrial sectors, especially: Agricultural machinery, Industrial...
STAINLESS STEEL TIGHTENING NUT DIN-2353

€2.89 (tax excl.)
€3.50 (tax included)
Tightening nut for DIN-2353 fitting Material: Stainless Steel 1.4571, Alloy X 6 CrNiMoTi 17 12 2 Double-edged ring, heat-treated. Pressures, see attached table. Temperature -200ºC / 400ºC. According to DIN-2353 S...

Menu

Please sign in first.

Sign in