Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
BASE PLATE NG-6 SIDE OUTLET

BASE PLATE NG-6 SIDE OUTLET

The NG-6 side outlet base plate in hydraulic systems serves as a support and connection for one or more NG-6 solenoid valves. The fluid inlet and outlet of the solenoid valves is located laterally.

Definition:

  • Made of aluminum.
  • It is supplied without plugs or screws.
  • 3/8" threaded side outlets
€54.15 (tax included)
€44.75 (tax excl.)
Reference:
4720
Description

NG-6 side exit motherboard

Product Details
4720
Comments
Related products
NG-6 SOLENOID VALVE OPEN CLOSED NG-6 SOLENOID VALVE OPEN CLOSED

€40.00 (tax excl.)
€48.40 (tax included)
An open-closed NG-6 solenoid valve is used to control the flow of pressurized oil. It is activated by an electrical signal, usually an electromagnetic coil. It has two positions: open and closed. Applications: Machine...
BUNA METAL GASKET BUNA METAL GASKET

€0.21 (tax excl.)
€0.25 (tax included)
metal gasket The Metal Buna gasket is a sealing element composed of an outer metal ring and an inner elastomer (NBR) ring. It is used to achieve a watertight seal in threaded and flanged joints. The main function of...
HEXAGONAL MALE CAP HEXAGONAL MALE CAP

€0.39 (tax excl.)
€0.47 (tax included)
Conical closure fitting with 60º BSP thread. Made of carbon steel. White zinc plated. Working temperature -40 / 150ºC. Working pressure 250 bar.
SOLENOID VALVE NG-6 4/3 CENTER P-T SOLENOID VALVE NG-6 4/3 CENTER P-T

€49.00 (tax excl.)
€59.29 (tax included)
The NG-6 4/3 PT center solenoid valve is used to precisely control the flow of pressurized oil. It has four ports and three possible positions. In the center position, ports P and T are connected, while ports A and B...
12 other products in the same category:
SOLENOID VALVE NG-6 4/2 PARALLEL CROSS

€40.00 (tax excl.)
€48.40 (tax included)
A 4/2 parallel crossover NG-6 solenoid valve precisely controls the flow of pressurized oil. It has four ports and two positions (open and closed). Applications: Hydraulic circuits, Machine tools, Pressing systems,...
MANUAL EMERGENCY POSITIONER

€35.00 (tax excl.)
€42.35 (tax included)
The manual emergency positioner is a system that can be used to move the slide of an NG-6 solenoid valve using the threaded push button that acts on the emergency button. It is mainly used when we have no voltage in...
DIN-43650-A LED T-30 CONNECTOR

€6.00 (tax excl.)
€7.26 (tax included)
The DIN-43650-A LED T-30 Connector is an electrical component designed for the fast and safe connection of cables in industrial and commercial applications. Applications: Machine control systems, outdoor lighting,...
NG-6 SOLENOID VALVE OPEN CLOSED

€40.00 (tax excl.)
€48.40 (tax included)
An open-closed NG-6 solenoid valve is used to control the flow of pressurized oil. It is activated by an electrical signal, usually an electromagnetic coil. It has two positions: open and closed. Applications: Machine...
NG-6 SOLENOID VALVE COIL

€23.22 (tax excl.)
€28.10 (tax included)
The NG-6 solenoid valve coil is located inside an NG-6 hydraulic solenoid valve. Its function is to convert electrical energy into magnetic energy to actuate an internal mechanism and, in this way, control the flow of...
NG-6 BLOCK WITH VENTING AND LIMITING GEAR

€281.40 (tax excl.)
€340.49 (tax included)
An NG-6 block with a vent and pressure relief valve is a modular component designed to efficiently and safely integrate multiple NG-6 solenoid valves into a hydraulic system. The vent valve allows for controlled...
BASE PLATE NG-6 LOWER OUTLET

€49.20 (tax excl.)
€59.53 (tax included)
The NG-6 bottom outlet base plate serves as a support and connection for one or more NG-6 solenoid valves. On this type of plate, the solenoid valves' fluid inlet and outlet connections are located on the bottom....
SOLENOID VALVE NG-6 4/3 CENTER P-T

€49.00 (tax excl.)
€59.29 (tax included)
The NG-6 4/3 PT center solenoid valve is used to precisely control the flow of pressurized oil. It has four ports and three possible positions. In the center position, ports P and T are connected, while ports A and B...
SOLENOID VALVE NG-6 4/3 CENTER H

€47.00 (tax excl.)
€56.87 (tax included)
An NG-6 4/3 center-h solenoid valve is used to precisely control the flow of pressurized oil. It is designed to operate in demanding industrial environments and withstand high pressures. It has four ports and three...
SOLENOID VALVE NG-6 4/3 CLOSED CENTER

€47.00 (tax excl.)
€56.87 (tax included)
The NG-6 4/3 closed-center solenoid valve precisely controls the flow of pressurized oil. It has four ports and three possible positions. In the center position, all ports are isolated, preventing fluid flow. It is...
REXROTH R933000030 12VDC COIL

€20.00 (tax excl.)
€24.20 (tax included)
The Rexroth R933000030 12VDC coil is an electromechanical component used in hydraulic valves. Its function is to activate or deactivate oil flow in a hydraulic circuit upon receiving an electrical signal....
NG-6 BLOCK WITH LIMITER

€118.00 (tax excl.)
€142.78 (tax included)
An NG-6 manifold with a pressure relief valve is used to safely and efficiently mount and control multiple NG-6 solenoid valves. This type of manifold incorporates a pressure relief valve, making it an ideal solution...
Recently Viewed
BASE PLATE NG-6 SIDE OUTLET

€54.15 (tax included)
€44.75 (tax excl.)
The NG-6 side outlet base plate in hydraulic systems serves as a support and connection for one or more NG-6 solenoid valves. The fluid inlet and outlet of the solenoid valves is located laterally. Definition: Made of...
ANGLE POLISHER Ø175 4015

€172.98 (tax excl.)
€209.31 (tax included)
A Ø175 4015 angle polisher is designed for polishing, buffing, and rust removal on various surfaces, especially in the automotive and metalworking industries. The 175 mm diameter refers to the maximum polishing disc...
POLYAMIDE TEE FITTING

€8.00 (tax excl.)
€9.68 (tax included)
A polyamide fitting allows you to join three sections of pipe or hose, creating a right-angle branch from a main line. Applications: Pneumatic systems, Low pressure fluid systems, Automotive, Industry, Gardening and...
50x50 LIGHTWEIGHT STRUCTURAL ALUMINUM PROFILE

€37.39 (tax excl.)
€45.24 (tax included)
Lightweight structural 50x50 aluminium profile – 10 mm slot The 50x50 structural aluminum profile is a robust component made of high-strength anodized aluminum , ideal for the construction of frames, protections,...
MINI ANGLE GRINDER 4504

€81.35 (tax excl.)
€98.43 (tax included)
A 4504 mini angle grinder is a portable tool that uses compressed air to spin an abrasive disc at high speeds. Its compact and lightweight design, along with its powerful pneumatic motor, makes it an ideal tool for a...
K DAMPED PISTON VIBRATOR

€171.20 (tax excl.)
€207.15 (tax included)
In the damped K-piston vibrator the linear vibration is generated by the movement of an internal floating piston rather than by impact between surfaces, and this is why the vibrators are also called air-damped piston...

Menu

Please sign in first.

Sign in