Click for more products.
No produts were found.

HYDRAULIC VALVES

  • MODULAR VALVES NG-6 NG-10

    MODULAR VALVES NG-6 NG-10

    <h2>Modular Oleohydraulic Valves. Buy at the best price with 24/48 hour shipping.</h2><p> Oleohydraulic valves are a type of valves used in hydraulic systems to control the flow, movements and functions of oil. These valves have the NG6 NG-10 CETOP type fixing system at their ends, or at their coupling base, which allows them to be connected directly to the pipes or other components of the hydraulic system.</p><p> CETOP NG-6 NG-10 valves are a series of standardized hydraulic valves used in industrial and mobile hydraulic applications. CETOP is an acronym that stands for Comité Européen des Transmissions Oléo-Hydrauliques et Pneumatiques, which translates into Spanish as European Committee for Oleohydraulic and Pneumatic Transmissions.</p><p> CETOP NG-6 NG-10 valves are standardized in terms of their dimensions, shapes and connections. This means that a CETOP valve from one manufacturer can be replaced by a CETOP valve from another manufacturer, as long as they meet the same specifications and standards. This facilitates the selection and exchange of hydraulic system components between different manufacturers and suppliers.</p><p> There are different types of CETOP valves, such as multi-way valves, pressure control valves, flow control valves and safety valves. These valves are used in applications where precise and reliable control of hydraulic fluid flow is required.</p><p> Oleohydraulic valves are designed to withstand high pressures and temperatures, and are available in a variety of designs and sizes to suit different applications.</p><p> Some of the most common types of hydraulic threaded valves are:</p><ul style="list-style-type:disc;"><li> Check Valves: Also known as one-way or non-return valves, these valves allow liquid to flow in one direction but prevent it from flowing in the opposite direction.</li><li> Pressure control valves: These pressure reducing valves regulate the oil pressure in the hydraulic system, allowing the force exerted by a cylinder or hydraulic motor to be increased or decreased.</li><li> Flow control valves: These valves regulate the amount of oil flowing through the hydraulic system, increasing or reducing the speed in the hydraulic cylinders.</li><li> Limiting valve: also known as safety valve or maximum valve. A hydraulic limit valve is a component used in hydraulic systems to control and limit fluid pressure in a hydraulic circuit. Its main function is to protect hydraulic components from an overpressure system, which could damage them or cause leaks.<br/> The hydraulic limit valve operates by opening or closing a valve in response to changes in hydraulic fluid pressure. When the pressure of the hydraulic fluid in the system exceeds a certain value, the limiting valve opens, using a spring, and allows part of the fluid to pass through it and return to the oil tank. This limits the pressure in the system and protects the hydraulic components from possible damage.</li></ul>
  • INLINE VALVES

    INLINE VALVES

    <h2>Online Oleohydraulic Valves.</h2><p> Oleohydraulic valves are a type of valves used in hydraulic systems to control the flow, movements and functions of oil. These valves have threads at their ends, or at their coupling base, which allows them to be connected directly to the pipes or other components of the hydraulic system.</p><p> Oleohydraulic valves are designed to withstand high pressures and temperatures, and are available in a variety of designs and sizes to suit different applications. Some of the most common types of hydraulic threaded valves are:</p><ul style="list-style-type:disc;"><li> <strong>Check Valves:</strong> Also known as one-way or non-return valves, these valves allow liquid to flow in one direction but prevent it from flowing in the opposite direction.</li><li> <strong>Pressure control valves:</strong> These pressure reducing valves regulate the oil pressure in the hydraulic system, allowing the force exerted by a cylinder or hydraulic motor to be increased or decreased.</li><li> <strong>Flow control valves:</strong> These valves regulate the amount of oil flowing through the hydraulic system, increasing or reducing the speed in the hydraulic cylinders.</li><li> <strong>Selector valves:</strong> this type of valve allows one of two possible paths to be selected, giving way to one and closing the other oil path.</li><li> <strong>Limiting valve:</strong> also known as safety valve or maximum valve. A hydraulic limiting valve is a component used in hydraulic systems to control and limit fluid pressure in a hydraulic circuit. Its main function is to protect hydraulic components from an overpressure system, which could damage them or cause leaks. The hydraulic limit valve operates by opening or closing a valve in response to changes in hydraulic fluid pressure.<br/> When the pressure of the hydraulic fluid in the system exceeds a certain value, the limiting valve opens, using a spring, and allows part of the fluid to pass through it and return to the oil tank. This limits the pressure in the system and protects the hydraulic components from possible damage.</li><li> <strong>Sequence Valve:</strong> A hydraulic sequence valve is a component used in hydraulic systems to control the order in which hydraulic cylinders or motors are activated. Its main function is to ensure that the cylinders or motors are activated in the correct order to perform a specific task. The hydraulic sequence valve operates by utilizing a series of valves that control the flow of hydraulic fluid. When a valve is activated, it opens the flow of hydraulic fluid to a specific cylinder or motor. If another valve is activated before the movement of the previous cylinder or motor is completed, the sequence valve ensures that the second cylinder or motor is not activated until the first has completed its movement.</li><li> <strong>Hydraulic Diverter Valves:</strong> A hydraulic diverter valve is a type of threaded valve used in hydraulic systems to control the flow of hydraulic fluid in different directions. Its main function is to allow the flow of hydraulic fluid to be diverted to different routes in a hydraulic system. The hydraulic diverter valve operates by utilizing a series of valves that control the flow of hydraulic fluid. When a valve is activated, it opens the flow of hydraulic fluid to a specific path in the hydraulic system. If another valve is activated, the flow of hydraulic fluid is diverted to another path in the hydraulic system.</li></ul>
Filter By
€150.00 (tax excl.)
The NG-6 double overcenter valve is used to control movement and block the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since the...
€37.95 (tax excl.)
Inline hydraulic pressure safety valve. To limit the circuit pressure to a specific value. The body is made of aluminum. Locknut for fixing. Flow rates from 20 to 130 l7min. Various setting pressures to choose from....
€182.00 (tax excl.)
The NG-6 simple overcenter valve is used to control the movement and block the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since...
€113.56 (tax excl.)
A spool flow divider is a type of hydraulic valve used to divide one flow of oil into two or more equal flows. The valve has a slide that moves along an orifice, dividing the oil flow into two or more parts. The valve...
€23.80 (tax excl.)
Flow regulator with unidirectional straight knob control Possibility of attaching a nut for paneling. Regulated scale Pressure 350 bar. Flow rates from 60 to 400 liters per minute.
€75.00 (tax excl.)
Modular NG-6 flow regulator. Flow rate 35 l/min. Temperature -20 / 70ºC Maximum pressure 250 bar. Three regulation options, in line A, in line B and the 2 lines AB
€120.00 (tax excl.)
NG-6 pressure limiting valve It serves to prevent a certain pre-set pressure from exceeding Pressure range 5...315 bar. (SPECIFY PRESSURE) Flow rate 35 l/min. Temperature -20ºC / 70ºC
€21.00 (tax excl.)
Flow regulator with BIDIRECTIONAL straight knob control allows regulation in both directions. Possibility of attaching a nut for paneling. Regulated scale. Maximum pressure 300 bar. Flow rate, from 60 to 300 l/min.
€38.40 (tax excl.)
Compensated 2-way flow regulator. Two chokes in series are present in the valve. The first corresponds to the one that is adjustable using the knob; The second, controlled by the pressure prior to and following the...
€96.56 (tax excl.)
Monobloc distributor with spring return to center lever. Double effect. Includes limiting valve. The position of the lever can be vertical or horizontal. Availability of 1 to 8 positions with lever, depending on...
€52.50 (tax excl.)
Modular non-return valve NG-6 Flow rate 35 l/min. Max pressure 250 bar Working temperature -20ºC / 70ºC
€2.40 (tax excl.)
Lever for monobloc distributors. For 3/8" - 1/2" models Length 160 mm. M-8 thread For 3/4" - 1" models Length 205 mm. M-10 thread Supplied with locknut
€168.75 (tax excl.)
NG-10 limiting valve Pressure range 5...315 bar. (SPECIFY PRESSURE) Flow rate 70 l/min. Temperature -30 / 80ºC
€33.00 (tax excl.)
Switched hydraulic piston pressure switch . 1/4" BSP male thread SPDT Contact Different fields of regulation. Maximum pressure 300 bar. Protection IP-65 Connection for wiring through DIN-43650-A three-pole.
€108.75 (tax excl.)
Modular non-return valve NG-10 Flow rate 70 l/min. Max pressure 250 bar. Standard temperature -30 / 80ºC
€335.00 (tax excl.)
The overcenter valve is used to control movement and block the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since the valve does...
€125.50 (tax excl.)
In-line pressure reducing valve (sequence). A hydraulic sequence valve is a component used in hydraulic systems to control the order in which hydraulic cylinders or motors are activated. Its main function is to ensure...
€370.00 (tax excl.)
The overcenter valve is used to control movement and block the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since the valve does...
€11.18 (tax excl.)
Hydraulic 60º cone male thread non-return valve . Q Zinc-plated steel body, internal elements in tempered steel. Opening pressure 1 bar. (other pressures, consult) Oil temperature 50ºC viscosity 30 cSt Flow rates from...
€155.00 (tax excl.)
A 6-way diverter solenoid valve is a valve that controls the flow of a fluid in six different directions. It is used to divert fluid from one line to another, or to combine fluid from two or more lines. 6-way diverter...
€11.41 (tax excl.)
The High Pressure Hydraulic Check Valve is used in hydraulic systems to allow fluid to flow in one direction and prevent it from flowing in the opposite direction. Data sheet: Check valve that allows passage in one...
€20.00 (tax excl.)
Rexroth Coil R933000030 12 VDC Bonina for Rexroth solenoid valves Connection for deutch connector DT 04-2P C45 07 Resistance 4.24 Ohns Power 33 Watt Intensity 2.8 Amperes Class H
€16.49 (tax excl.)
Bidirectional pineapple bidirectional regulator . To regulate the speed of hydraulic cylinders. Made of steel. Fixing locknut. Temperature -20ºC / 80ºC Flow rates from 15 to 80 liters per minute. Maximum pressure 350...
€18.31 (tax excl.)
Pineapple type unidirectional flow regulator . to regulate the speed of the hydraulic cylinders. Made of steel. Fixing locknut. Temperature -20º / 80ºC Maximum pressure 350 bar.
€14.67 (tax excl.)
Type "O" circuit selector valve Selects the highest pressure between two lines and closes the other. Pressure 350 bar. Flow rate between 20 and 60 l/min The body is made of aluminum.
€20.93 (tax excl.)
Double pilot non-return valve. Made of steel. Conical seat. Working pressure, between 300 and 350 bar. Max temperature 80ºC
€2.80 (tax excl.)
Extended spherical fitting for mounting on double piloted check valves Made of carbon steel. Working temperature -40 / 150ºC. Working pressure 250 bar. Possibility of choosing various lengths and diameters of the ball.
€140.00 (tax excl.)
Wika A-10 pressure transmitter 12725111 analog output. 1/4" thread Pressure 0 - 250 bar Accuracy 0.5% Supply voltage 14 - 30 V 0-10V output IP65 protection Connection DIN-175301-803 A
Showing 1-33 of 33 item(s)

Hydraulic Valves. Buy online at the best price

Oleohydraulic valves are a type of valves used in hydraulic systems to control the flow, movements and functions of oil. These valves have NG6 NG-10 CETOP type threads or fixings on their ends, or on their coupling base, which allows them to be connected directly to the pipes or other components of the hydraulic system.

Oleohydraulic valves are designed to withstand high pressures and temperatures , and are available in a variety of designs and sizes to suit different applications. Some of the most common types of hydraulic threaded valves are:

Check valves – Also known as one-way or non-return valves, these valves allow liquid to flow in one direction but prevent it from flowing in the opposite direction.

Pressure control valves: These pressure reducing valves regulate the oil pressure in the hydraulic system, allowing the force exerted by a cylinder or hydraulic motor to be increased or decreased.

Flow control valves: These valves regulate the amount of oil flowing through the hydraulic system, increasing or reducing the speed in the hydraulic cylinders.

Selector valves: this type of valve allows one of two possible paths to be selected, giving way to one and closing the other oil path.

Limiting valve: also known as safety valve or maximum valve. A hydraulic limit valve is a component used in hydraulic systems to control and limit fluid pressure in a hydraulic circuit. Its main function is to protect hydraulic components from an overpressure system, which could damage them or cause leaks. The hydraulic limit valve operates by opening or closing a valve in response to changes in hydraulic fluid pressure. When the pressure of the hydraulic fluid in the system exceeds a certain value, the limiting valve opens, using a spring, and allows part of the fluid to pass through it and return to the oil tank. This limits the pressure in the system and protects the hydraulic components from possible damage.

Sequence Valve: A hydraulic sequence valve is a component used in hydraulic systems to control the order in which hydraulic cylinders or motors are activated. Its main function is to ensure that the cylinders or motors are activated in the correct order to perform a specific task. The hydraulic sequence valve operates by utilizing a series of valves that control the flow of hydraulic fluid. When a valve is activated, it opens the flow of hydraulic fluid to a specific cylinder or motor. If another valve is activated before the movement of the previous cylinder or motor is completed, the sequence valve ensures that the second cylinder or motor is not activated until the first has completed its movement.

Hydraulic Diverter Valves: A hydraulic diverter valve is a type of threaded valve used in hydraulic systems to control the flow of hydraulic fluid in different directions. Its main function is to allow the flow of hydraulic fluid to be diverted to different routes in a hydraulic system. The hydraulic diverter valve operates by utilizing a series of valves that control the flow of hydraulic fluid. When a valve is activated, it opens the flow of hydraulic fluid to a specific path in the hydraulic system. If another valve is activated, the flow of hydraulic fluid is diverted to another path in the hydraulic system.

There are different types of hydraulic diverter valves, such as 3-way, 4-way and 5, 6, 8-way or more, combining with various modules or valves.

CETOP NG-6 NG-10 valves are a series of standardized hydraulic valves used in industrial and mobile hydraulic applications. CETOP is an acronym that stands for Comité Européen des Transmissions Oléo-Hydrauliques et Pneumatiques, which translates into Spanish as European Committee for Oleohydraulic and Pneumatic Transmissions.

CETOP NG-6 NG-10 valves are standardized in terms of their dimensions, shapes and connections. This means that a CETOP valve from one manufacturer can be replaced by a CETOP valve from another manufacturer, as long as they meet the same specifications and standards. This makes it easier to select and exchange hydraulic system components between different manufacturers and suppliers.

There are different types of CETOP valves, such as multi-way valves, pressure control valves, flow control valves and safety valves. These valves are used in applications where precise and reliable control of hydraulic fluid flow is required.

Read more

Menu

Settings