Click for more products.
No produts were found.

GALVANIZED THREADED FITTING

Filter By
€20.00 (tax excl.)
Teflon sealing thread is made from 100% polytetrafluoroethylene ( PTFE ), a synthetic polymer resistant to corrosion, chemicals and temperature. It is used to seal metal or plastic threaded joints, such as those found...
€0.50 (tax excl.)
Teflon roll is a type of adhesive tape that is made of a synthetic polymer that is resistant to temperature, corrosion and abrasion. Teflon is a non-electrically conductive material, making it ideal for electrical...
€6.02 (tax excl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard Work...
€5.39 (tax excl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard Work...
€10.14 (tax excl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard Work...
€33.26 (tax excl.)
Anti-vibration sleeve, serves as an expansion joint. They absorb and dampen vibrations. Reduce alignment problems. Flange made of galvanized steel. EPDM elastometer and nylon reinforcement. Pressure PN-16 Vacuum 400...
€21.17 (tax excl.)
Anti-vibration sleeve. They absorb and dampen vibrations. Reduce alignment problems. Union nut made of galvanized steel. Elastometer in EPDM and nylon reinforcement. Pressure PN-16. Vacuum 400 mm Hg Temperature -10 /...
€1.25 (tax excl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard Work...
€1.10 (tax excl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard Work...
€0.67 (tax excl.)
Galvanized male plug Fig.290 Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured...
€0.92 (tax excl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard Work...
€0.89 (tax excl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard Work...
€1.85 (tax excl.)
Galvanized male male reduction fig.245 Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950...
€7.37 (tax excl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard Work...
€3.96 (tax excl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard Work...
€1.93 (tax excl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard Work...
€1.25 (tax excl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard Work...
€3.38 (tax excl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard Work...
€6.61 (tax excl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard Work...
€5.76 (tax excl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard Work...
€1.15 (tax excl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard Work...
€1.50 (tax excl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard Work...
€0.89 (tax excl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard Work...
€3.89 (tax excl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard Work...
€3.65 (tax excl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard Work...
€2.65 (tax excl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard Work...
€3.76 (tax excl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard Work...
€2.60 (tax excl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard Work...
€2.81 (tax excl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard Work...
€4.33 (tax excl.)
Galvanized fitting fig.180 Female cross Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950...
€1.54 (tax excl.)
Galvanized reducing sleeve fig.240 Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950...
€1.42 (tax excl.)
Male female reduction fig.241 galvanized Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950...
€2.52 (tax excl.)
Galvanized male female supplement fitting fig.246 Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN...
Showing 1-33 of 33 item(s)

Galvanized threaded fittings. Buy at the best price

Galvanized threaded fittings are components used in plumbing and piping systems to join two galvanized metal pipes. These fittings are coated with zinc to protect against corrosion. Galvanized fittings are common in potable water applications, irrigation systems, gas piping systems, and other locations where additional corrosion resistance is needed.

You can find galvanized fittings in countless shapes, sizes and measurements. These fittings are used to connect and route pipes effectively. In addition to their corrosion resistance, galvanized fittings are also known for their durability and longevity.

The technical characteristics are as follows:

  • Union threads according to ISO 7/1 (DIN 2999 / BS 21)
  • Clamping threads according to ISO 228/1
  • Nominal diameter dn under ISO 6708
  • Dimensions according to ISO 49 & DIN 2950
  • Manufactured under UNE EN 10242 standard
  • Work pressure:
  • Nominal pressure: PN-16 / PN-25 (300 lbs)
  • Working ambient temperature range: -20/+300ºC
Read more

Menu

Settings