Click for more products.
No products were found.

FIG. 41 45º CURVE GALVANIZED FEMALE

Fig. 41 Galvanized 45º Female Bend is a plumbing fitting for changing the direction of fluid flow at a 45º angle. It has female threads on both ends.

It is usually installed in plumbing, heating and industrial tasks.

Technical data sheet:

  • Connection threads according to ISO 7/1 (DIN 2999 / BS 21)
  • Fastening threads according to ISO 228/1
  • Nominal diameter DN under ISO 6708
  • Dimensions according to ISO 49 & DIN 2950
  • Manufactured under UNE standard en 10242
  • Working pressure:
  • Nominal pressure: PN-16 / PN-25 (300 lbs)
  • Working ambient temperature range: -20/+300ºC
Read moreShow less
€4.42 (tax incl.)
€3.65 (tax excl.)
SELECT THE THREAD
  • 1/2"
  • 3/4"
  • 1"
  • 1-1/4"
  • 1-1/2"
  • 2"
  • 2-1/2"
  • 3"
  • 4"
Reference:
12540016
Description

Fig. 41 galvanized female 45º curve

Read moreShow less
Product Details
12540016
Comments (0)
8 other products in the same category:
€2.52 (tax excl.)
€3.05 (tax incl.)
Galvanized male female supplement fitting fig.246 Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 &...
€10.14 (tax excl.)
€12.27 (tax incl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard...
€20.97 (tax excl.)
€25.37 (tax incl.)
Anti-vibration sleeve, serves as an expansion joint. They absorb and dampen vibrations. Reduce alignment problems. Flange made of galvanized steel. EPDM elastometer and nylon reinforcement. Pressure PN-16 Vacuum 400...
€1.25 (tax excl.)
€1.51 (tax incl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard...
€7.37 (tax excl.)
€8.92 (tax incl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard...
€1.10 (tax excl.)
€1.33 (tax incl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard...
€2.81 (tax excl.)
€3.40 (tax incl.)
Figure 1 shows a galvanized 90° male-female elbow that allows you to change the direction of a fluid (water, gas, etc.) at a 90° angle. It is made of galvanized iron, which gives it high corrosion resistance and a...
€1.93 (tax excl.)
€2.34 (tax incl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard...
Recently Viewed
€4.42 (tax incl.)
€3.65 (tax excl.)
Fig. 41 Galvanized 45º Female Bend is a plumbing fitting for changing the direction of fluid flow at a 45º angle. It has female threads on both ends. It is usually installed in plumbing, heating and industrial tasks....

Menu

Settings