Click for more products.
No products were found.

FIG.90R GALVANIZED REDUCED FEMALE ELBOW

  • Union threads according to ISO 7/1 (DIN 2999 / BS 21)
  • Clamping threads according to ISO 228/1
  • Nominal diameter dn under ISO 6708
  • Dimensions according to ISO 49 & DIN 2950
  • Manufactured under UNE EN 10242 standard
  • Work pressure:
  • Nominal pressure: PN-16 / PN-25 (300 lbs)
  • Working ambient temperature range: -20/+300ºC
Read moreShow less
€1.82 (tax incl.)
€1.50 (tax excl.)
SELECT THE THREAD
  • 3/4"-1/2"
  • 1/2"-3/8"
  • 1"-1/2"
  • 1"-3/4"
  • 1-1/4" - 1/2"
  • 1-1/4"-3/4"
  • 1-1/4"-1"
  • 1-1/2"-1"
  • 1-1/2" - 1-1/4"
  • twenty-one"
  • 2" - 1-1/4"
  • 2" - 1-1/2"
  • 2-1/2" - 2"
  • 3" - 2"
  • 3" - 2-1/2"
Reference:
12570014
Description

Fig. 90R galvanized reduced female-female elbow

Read moreShow less
Product Details
12570014
Comments (0)
8 other products in the same category:
€2.65 (tax excl.)
€3.21 (tax incl.)
The Fig. 40 45º male-female galvanized bend is a plumbing and piping system fitting designed to change the direction of a fluid at a 45º angle. It has a male thread on one end and a female thread on the other. Common...
€0.67 (tax excl.)
€0.81 (tax incl.)
Galvanized male plug Fig.290 Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured...
€1.85 (tax excl.)
€2.24 (tax incl.)
Fig. 245 Galvanized male-male reduction It is a piece with male threads at both ends and a decreasing internal diameter. It is used to join two pipes or tubes of the same material but of different diameters in a safe...
€1.93 (tax excl.)
€2.34 (tax incl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard...
€1.15 (tax excl.)
€1.39 (tax incl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard...
€0.92 (tax excl.)
€1.11 (tax incl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard...
€5.76 (tax excl.)
€6.97 (tax incl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard...
€3.89 (tax excl.)
€4.71 (tax incl.)
Fig. 85 galvanized bridge is an accessory for plumbing and pipe installations. Its function is to connect two sections of pipe that are at different heights, allowing the fluid to circulate without interruptions. It...
Recently Viewed
€1.82 (tax incl.)
€1.50 (tax excl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard...

Menu

Settings