Click for more products.
No produts were found.
Filter By
Filter By
Categories
SELECT THREAD
CHOOSE MODEL/COLOR
Ø TUBE
CHOOSE MODEL
ØTube - Thread
OUTPUT TYPE
DIAMETERS
EXTENT
THREAD
D.N.
SIZE
MATERIAL
FLOW

FITTINGS AND LINKS

  • INSTANT FITTING

    INSTANT FITTING

    <h2>Fittings - instant connectors. Buy online at the best price</h2><p> A <strong>push-in fitting is a type of quick connector</strong> commonly used on rigid piping and hose systems to facilitate quick connection and disconnection of components.</p><p> These fittings are used in a <strong>wide variety of applications, such as automotive, pneumatics, plumbing and more</strong> . Instant fittings are usually easy to use and do not require special tools for installation, they are reusable.</p><p> One-touch fittings are often designed with a number of components, including a main body, retaining rings, an O-ring, and a lock ring. These components work together to create a tight connection when properly assembled.</p><p> It is important to note that one-touch fittings come in a variety of sizes, from diameter 3 to 16, and a host of configurations to accommodate different types of pipe and hose, so it is important to select the appropriate type and size for your application. specific.</p><p> The construction of these instant fittings is basically for joining tubes or tube-threads to be able to be implemented in all types of equipment. Instant insert fittings are used by all types of industry. They are economical and have very easy installation.</p>
  • INSTANT MINIATURE FITTING

    INSTANT MINIATURE FITTING

    <h2>Miniature One-touch Fittings</h2><p> A <strong>miniature one-touch fitting is a type of quick connector</strong> commonly used in rigid piping systems to facilitate quick connection and disconnection of components. These fittings are used in a wide variety of applications where flow is minimal, such as automotive, pneumatics, robotics and more.</p><p> Miniature one-touch fittings are usually easy to use and do not require special tools for installation, they are reusable. Miniature one-touch fittings are often designed with a number of components, including a main body, retaining rings, an O-ring, and a lock ring.</p><p> These components work together to create a tight connection when properly assembled. It is important to note that the one-touch fittings come in miniature sizes, from 3 to 6 diameter and endless configurations to fit different types of pipes and hoses, so it is important to select the appropriate type and size for your specific application.</p><p> The construction of these miniature instantaneous fittings is basically for joining tubes or tube-threads to be implemented in all types of equipment. Miniature push-in fittings are used by all types of industry. They are economical and have very easy installation.</p>
  • INSTANT STAINLESS STEEL FITTING

    INSTANT STAINLESS STEEL FITTING

    <h2>Stainless instant fittings. Buy at the best price</h2><p> A <strong>stainless steel instant fitting</strong> is a type of quick connector commonly used in rigid piping and hose systems to facilitate quick connection and disconnection of components. These fittings are used in a wide variety of sectors, the food, chemical, pharmaceutical, oil industry, and in any application where the use of fittings is required where they are placed outdoors and where aggressive liquids have to flow.</p><p> <strong>Stainless instant fittings are very easy to use</strong> and do not require special tools for installation, they are reusable.</p><p> One <strong>-touch fittings are often designed with a number of components</strong> , including a main body, retaining rings, an O-ring, and a lock ring, all made of 316-grade stainless steel and Viton gaskets. These components work together to create a connection. airtight when properly assembled. They can withstand temperatures of up to 160ºC and withstand a pressure of 15 bar.</p><p> It is important to note that <strong>one-touch fittings come in a variety of sizes</strong> , from diameter 4 to 12 and a host of configurations to fit different types of pipes and hoses, so it is important to select the right type and size for your application. specific.</p><p> The construction of these instant fittings is basically for joining tubes or tube-threads to be able to be implemented in all types of equipment. Push-in fittings are economical and have very easy installation.</p>
  • HIGH PRESSURE INSTANT FITTING

    HIGH PRESSURE INSTANT FITTING

    <h2>High pressure instant fittings. Buy at the best price</h2><p> A <strong>high pressure one-touch fitting</strong> is a type of quick connector commonly used in lubrication systems or hydraulic circuits to facilitate quick connection and disconnection of components. These fittings are used in a wide variety of applications, such as automotive, steel and in general in any application where there is a centralized lubrication system and hydraulic pilots.</p><p> <strong>High pressure instant fittings are usually easy to use and do not require special tools</strong> for installation, they are reusable. High pressure one-touch fittings are often designed with a number of components, including a main body, retaining rings, an O-ring, and a lock ring.</p><p> These components work together to create a tight connection when properly assembled. All these elements are made of UNI-12164-5 nickel-plated brass and not plastic, except for the gasket. It withstands a pressure of 150 bar and withstands a temperature of -20ºC to 70ºC</p><p> It is important to note that one-touch fittings have 2 tube sizes, from diameter 4 and 6, and it is important to select the appropriate type and size for your specific application.</p><p> The construction of these instant fittings <strong>is basically for joining tubes or tube-threads</strong> to be able to be implemented in all types of equipment. High pressure push-in fittings are used by all types of industry. They are economical and have very easy installation.</p>
  • INSTANT FOOD FITTING

    INSTANT FOOD FITTING

    <h2>Instant food fittings. Buy online at the best price</h2><p> A food push-in fitting is a type of quick connector commonly used in rigid piping systems to facilitate quick connection and disconnection of components. These fittings are used in a wide variety of sectors, the food, chemical, pharmaceutical industries and in any application where the use of fittings made of plastic is required.</p><p> The instant food-grade fittings are very easy to use and do not require special tools for installation, they are reusable.</p><p> One-touch fittings are often designed with a number of components, including a main body, retaining rings, an O-ring and a lock ring, all in food grade and EPDM gaskets that may come into contact with food products. These components work together to create a tight connection when properly assembled.</p><p> They can withstand temperatures of up to 90ºC and withstand a pressure of 20 bar. Instant food fittings have regulations and are approved in accordance with directive 200//95/EC RoHS and 1907/2006 and other European regulations.</p><p> It is important to note that one-touch fittings come in a variety of sizes, from diameter 4 to 12, and a host of configurations to accommodate different types of pipe and hose, so it is important to select the appropriate type and size for your application. specific.</p><p> The construction of these instant fittings is basically for joining tubes or tube-threads to be able to be implemented in all types of equipment. Push-in fittings are economical and have very easy installation.</p>
  • INSTANT MISTING FITTING

    INSTANT MISTING FITTING

    <h2>Instant nebulization links and fittings. Buy online at the best price.</h2><p> The new line of misting accessories. Now use all your knowledge and experience in high-pressure connections for a completely new purpose. Create “Nebulization”. Water at 70 bar pressure is channeled through hoses and sprayed through nozzles as millions of very fine mist droplets, thus creating a cooling effect around a specific area.</p><p> Fogging, as a cost-effective and energy-saving method, is a non-polluting technique used in both industrial and commercial fields to control odors and humidity, to fix dust, and to cool or lower indoor and outdoor temperatures.</p><p> A high-pressure one-touch fitting for misting is a type of quick connector commonly used in high-pressure, water-based systems to facilitate quick connection and disconnection of components. High pressure instant fittings for misting are usually easy to use and do not require special tools for installation, they are reusable.</p><p> High pressure one-touch fittings for misting are often designed with a number of components, including a main body, retaining rings, an O-ring, and a lock ring. These components work together to create a tight connection when properly assembled.</p><p> All these elements are made of UNI-12164-5 nickel-plated brass and not plastic, except for the gasket. It withstands a pressure of 80 bar and a temperature of 80ºC. It is important to keep in mind that instant fittings have 2 tube sizes, from ¼ and 3/8 diameter.</p><p> It is important to select the proper type and size for your specific application. The construction of these instant fittings is basically for joining tubes or tube-threads to be able to be implemented in all types of equipment.</p><p> High pressure push-in fittings for misting are used by all types of industry. They are economical and have very easy installation.</p>
  • NICKEL PLATED BRASS THREADED FITTING

    NICKEL PLATED BRASS THREADED FITTING

    <h2>Nickel-plated brass threaded fittings. Buy online the best price</h2><p> A nickel-plated brass fitting is a piece used in all types of applications to connect pipes safely and resistant to corrosion. These fittings are made from brass, a material that is known for its durability and strength, and are plated with nickel to provide additional protection against corrosion. OT-58 Standard</p><p> Nickel-plated brass fittings are common in pneumatic, plumbing, and low-pressure hydraulic systems that transport gas or fluids, since brass is a material that meets quality and safety standards for this type of applications. They are also used in industrial and commercial applications where a robust, corrosion-resistant connection is required. They withstand a pressure of 60 bar.</p><p> These fittings are typically available in a variety of sizes and types, such as elbows, tees, unions, and many more, to suit specific installation needs. The thread is BSP or gas type, although it can also be NPT. Be sure to select the appropriate size and type of nickel-plated brass fitting for your specific project.</p>
  • STAINLESS STEEL THREADED FITTINGS

    STAINLESS STEEL THREADED FITTINGS

    <h2>Stainless steel threaded fittings. Buy online at the best price</h2><p> A stainless steel threaded fitting is a piece used in all types of applications to connect pipes safely and resistant to corrosion and the environment. These fittings are manufactured from austenitic stainless steel A-316 DIN 1.4408, with a tolerance according to DIN 1.4408, this material is known for its durability and resistance, to provide additional protection against corrosion. Manufacturing standard according to UNE EN 10213-4</p><p> Stainless steel threaded fittings are common in pneumatic, plumbing, and low-pressure hydraulic systems that transport gas or fluids, since stainless is a material that meets quality and safety standards for this type of applications. They are also used in food grade, pharmaceutical and commercial applications where a robust, corrosion resistant connection is required. They withstand a pressure of 40 bar.</p><p> These fittings are typically available in a variety of sizes and types, such as elbows, tees, unions, and many more, to suit specific installation needs. The thread is BSP or gas type, although it can also be NPT. Be sure to select the appropriate size and type of nickel-plated brass fitting for your specific project.</p>
  • GALVANIZED THREADED FITTING

    GALVANIZED THREADED FITTING

    <h2>Galvanized threaded fittings. Buy at the best price</h2><p> Galvanized threaded fittings are components used in plumbing and piping systems to join two galvanized metal pipes. These fittings are coated with zinc to protect against corrosion. Galvanized fittings are common in potable water applications, irrigation systems, gas piping systems, and other locations where additional corrosion resistance is needed.</p><p> You can find galvanized fittings in countless shapes, sizes and measurements. These fittings are used to connect and route pipes effectively. In addition to their corrosion resistance, galvanized fittings are also known for their durability and longevity.</p><p> The technical characteristics are as follows:</p><ul><li> Union threads according to ISO 7/1 (DIN 2999 / BS 21)</li><li> Clamping threads according to ISO 228/1</li><li> Nominal diameter dn under ISO 6708</li><li> Dimensions according to ISO 49 & DIN 2950</li><li> Manufactured under UNE EN 10242 standard</li><li> Work pressure:</li><li> Nominal pressure: PN-16 / PN-25 (300 lbs)</li><li> Working ambient temperature range: -20/+300ºC</li></ul>
  • BRASS THREADED FITTINGS

    BRASS THREADED FITTINGS

    <h2>Brass threaded fittings. Buy online at the best price.</h2><p> A brass fitting is a piece used in all types of applications to connect pipes safely and resistant to corrosion. These fittings are made from brass, a material that is known for its durability and strength to provide additional protection against corrosion. The UNE EN 12165 standard. They are manufactured by hot stamping.</p><p> Brass fittings are common in pneumatic, plumbing, and low-pressure hydraulic systems that transport gas or fluids, since brass is a material that meets quality and safety standards for this type of applications. They are also used in industrial and commercial applications where a robust, corrosion-resistant connection is required. They withstand a pressure of 20 bar.</p><p> These fittings are typically available in a variety of sizes and types, such as elbows, tees, unions, hose barbs, and many more, to suit specific installation needs. The thread is BSP type. Be sure to select the appropriate size and type of nickel-plated brass fitting for your specific project.</p>
  • BRASS SEMI-QUICK FITTINGS

    BRASS SEMI-QUICK FITTINGS

    <h2>Brass semi-fast fittings. Buy at the best price</h2><p> A <strong>semi-fast nickel-plated brass fitting</strong> is a component used in piping and connection systems to facilitate the joining and disconnecting of tubes quickly and safely, without the need for special tools. These fittings are common in industrial applications, pneumatic and hydraulic systems, as well as plumbing and compressed air systems.</p><p> Semi-quick fittings are typically designed with locking or quick-release mechanisms that allow tubing to be coupled or uncoupled efficiently. They may also include seals or gaskets to ensure a tight connection and prevent fluid leaks. The working pressure reaches 15 bar, and it can work at a temperature of -20ºC to 80ºC.</p><p> These fittings can be available in a variety of sizes, from diameter 4, 5, 6, 8, 10, 12 and 15 mm, depending on the specific application. Your choice depends on factors such as working pressure, the type of fluid to be transported and environmental conditions.</p><p> It is important to note that the availability and specifications of semi-quick fittings may vary by manufacturer and supplier, so it is advisable to consult a specialist or industrial products supplier for more detailed information on specific options.</p>
  • SEMI-QUICK STAINLESS STEEL FITTINGS

    SEMI-QUICK STAINLESS STEEL FITTINGS

    <h2>Stainless Semi-rapid Fittings. Buy online at the best price</h2><p> A <strong>semi-quick fitting in 316 stainless quality</strong> is a component used in piping and connection systems to facilitate the joining and disconnecting of tubes quickly and safely, without the need for special tools. These fittings are common in industrial applications, pneumatic and hydraulic systems, as well as plumbing and compressed air systems. Also used in the food, pharmaceutical and chemical industries.</p><p> <strong>Stainless steel semi-rapid fittings</strong> are usually designed with locking or quick-release mechanisms that allow the tubes to be coupled or uncoupled efficiently. They may also include seals or gaskets to ensure a tight connection and prevent fluid leaks. The working pressure reaches 20 bar, and it can work at a temperature of -20ºC to 220ºC</p><p> These fittings can be available in a variety of sizes, from diameter 6, 8, 10, mm, depending on the specific application. Your choice depends on factors such as working pressure, the type of fluid to be transported and environmental conditions.</p><p> It is important to note that the availability and specifications of stainless semi-quick fittings may vary by manufacturer and supplier, so it is advisable to consult with a specialist or industrial products supplier for more detailed information on specific options.</p>
  • BRASS BICONE NUT FITTING

    BRASS BICONE NUT FITTING

    <h2>NICKEL-PLATED BRASS FITTING WITH NUT AND BICONE. Buy online at the best price</h2><p> A nickel-plated brass nut and bicone fitting is a component used in piping, calibrated and connection systems to join two elements, such as nylon, polyamide, polyurethane, PTFE, steel, dekabon copper tubes, etc., in a safe and airtight manner. The fitting consists of a nut, also made of brass, that is screwed onto the threaded end of a tube joined with an oval or bicone, and is generally used together with a washer, in case the thread is cylindrical to ensure adequate sealing.</p><p> The nickel-plated brass nut and bicone fitting is tightened manually or with a suitable tool, such as a wrench, to create a tight connection that is resistant to liquid or gas leakage. They are made of nickel-plated brass UNI-EN 12164CWG14N. Good resistance to working pressure and temperature. Conical thread 1507 - DIN 2999 and cylindrical ISO 228. Max. pressure. working pressure 110 bar up to Ø 8 mm, 60 bar</p><p> Nut and bicone fittings are common in pneumatic, hydraulic and industrial piping systems and most water and gas supply systems. They are available in different sizes from diameter 4 to 18 and various thread types to adapt to the specific needs of each application.</p>
  • STAINLESS STEEL BICONE NUT FITTING

    STAINLESS STEEL BICONE NUT FITTING

    <h2>Fitting with nut and stainless steel bicone. Buy online at the best price</h2><p> A <strong>fitting with nut and INOX bicone</strong> is a component used in pipe systems, calibrated and connections to join two elements, such as nylon, polyamide, polyurethane, PTFE, steel, dekabon copper tubes, etc., in a safe and airtight manner.</p><p> The fitting consists of a nut, also made of stainless steel, that is screwed onto the threaded end of a tube joined with a stainless oval or bicone, and is generally used together with a washer, if the thread is cylindrical to ensure adequate sealing. .</p><p> The stainless bicone nut fitting is tightened manually or with a suitable tool, such as a wrench, to create a tight connection that is resistant to liquid or gas leakage.</p><ul style="list-style-type:circle;"><li> They are made of 316 stainless steel.</li><li> Minimum pressure 0.99 bar Max. pressure 100 bar.</li><li> They withstand a temperature of -20ºC to 225ºC</li><li> Conical gas thread conforming to ISO 7.1 BS21.DIN2999</li></ul><p> Stainless bicone nut fittings are common in pneumatic, hydraulic and industrial piping systems and most water and gas supply systems. Especially used in the food, chemical and pharmaceutical sectors. They are also used for outdoor use since the stainless material prevents it from rusting.</p><p> They are available in different sizes from diameter 6 to 12 and various thread types to adapt to the specific needs of each application.</p>
  • STAINLESS STEEL INSTRUMENTATION FITTING

    STAINLESS STEEL INSTRUMENTATION FITTING

    <h2>Stainless instrumentation fittings. Buy online at the best price</h2><p> The instrumentation fitting is a connection or accessory used in industrial instrumentation systems. These fittings are used to safely and reliably connect measuring instruments, such as pressure gauges, pressure transmitters, thermometers, and other devices, to pipelines or equipment in industrial processes.</p><p> Instrumentation fittings are typically stainless steel, but can also be made of brass or corrosion-resistant materials to ensure measurement accuracy and durability in industrial environments. They are used in a variety of industries, including petrochemical, pharmaceutical, food and water treatment, among others.</p><p> They are made of ASTM A479 Inox-316 stainless steel. Double cone design, front cone heat treated by nitriding. Easy disassembly and retightening (silver coated on the nut thread to prevent seizure). Maximum working pressure 410 bar. Working temperature between -54°C / 425°C</p><p> These fittings are designed to ensure a tight connection and allow easy removal and replacement of measuring instruments without interrupting the process. Its design is based on a double ring or bicone to guarantee safety and low tightening torque and axial transmission of the closing pressure, avoiding twisting in the tube. They come in a variety of sizes and types, such as compression fittings, threaded fittings , push-in fittings and more, depending on the specific needs of the application.</p>
  • FITTINGS FOR AIR NETWORKS

    FITTINGS FOR AIR NETWORKS

    <h2>Fittings for air networks. Buy online at the best price</h2><p> Compressed air networks consist of a pneumatic circuit made up of pipes and other accessories, as well as valves or distributors. Through these, the air flow moves from a compressor to the service unit where this air is required. These pneumatic networks are preceded by a compressed air compressor, a dryer, an air tank and filters.</p><p> Depending on several factors, there are two types of compressed air networks: closed and open.</p><h3> Closed compressed air networks</h3><p> Closed compressed air networks involve a greater initial investment. On the other hand, they offer ease in maintenance work, since certain parts of the system can be isolated without affecting production. In this type of network, the air flow is not constant, and changes depending on consumption. The main line is constituted by a ring system.</p><h3> Open compressed air networks</h3><p> As for open pneumatic networks, they require less investment at the beginning. Another of its main characteristics or advantages is that inclinations can be implemented in this type of networks for the evaluation of condensates. Regarding maintenance, it is possible to have to resort to stopping the air supply (and consequently, stopping production) for proper inspection or repair. Open compressed air networks are made up of a main line from which the service and secondary lines flow.</p><p> For the installation of a compressed air network, approved and certified EN AW T6 UNI-EN 755-2 extruded aluminum alloy tube is usually used. Pressure range -0.6 / 16 bar. It has a titanium-based exterior and interior treatment, exterior electroplating paint, blue RAL 5012. chrome-free, complies with Rohs standard. Does not require maintenance. Minimum friction coefficient. Its anti-corrosion eliminates the risk of leaks. For application in compressed air distribution systems, although it is compatible with other fluids, water, vacuum, neutral gases.</p><p> To connect and distribute the compressed air, nut fittings made of technopolymer and stainless steel cutting ring are used. Great variety of accessories and fittings to be able to carry out any assembly to overcome obstacles, such as pillars, walls, etc.</p><p> They withstand a temperature of -30ºC / 80ºC. The available diameters of both fittings and pipe are 16-20-25-32-40-50-63. Reaction to fire: EN 13501-1:2007+A1:2009 EN ISO13823:2010</p><p> Ease of assembly, connection and disconnection, They are reusable.</p><p> Compressed air networks are installed in all types of industries or workshops where compressed air is required.</p>
  • COMPRESSED AIR QUICK PLUGS

    COMPRESSED AIR QUICK PLUGS

    <h2>Compressed air quick couplings. Buy online at the best price</h2><p> <strong>Compressed air quick couplers</strong> , also known as air quick couplings or air intakes, are devices used in compressed air systems to facilitate the quick connection and disconnection of tools, equipment and hoses to the compressed air network. They are designed to save time and minimize air pressure loss when connecting or disconnecting components.</p><p> They facilitate quick tool changes and optimization of efficiency in work environments. These quick plugs consist of two parts: the male plug or adapter and the female socket or also called plug. The male part has a nipple that inserts into the female socket, and they usually have a locking lever that secures the connection. This allows compressed air to flow efficiently and prevents leaks.</p><p> There are countless quick-plug connection profiles, from 2 mm pitch to 25 mm pitch. There are several types of generalized profile such as UNI ISO-6150 B-12, DN-9 DIN6150-B15, 5 mm pitch mignon, etc. They are made of brass, stainless steel or plastic materials. They withstand a pressure of up to 15 bar and reach temperatures of up to 100ºC depending on the model.</p><p> There is a variety of plugs called safety plugs. A compressed air safety quick coupler is a crucial component in compressed air systems to ensure the safe and efficient connection and disconnection of tools and equipment. These quick couplers are designed to safely release residual air pressure upon disconnection, minimizing the risk of injury or damage.</p><p> Some common features of compressed air safety quick couplers include; Locking System: Many of these plugs require a two-step action to disconnect, preventing accidental disconnections. Pressure Relief Valve: Helps release residual pressure before disconnection. Quick Connect: Makes it easy to attach and disconnect tools and equipment.</p><p> Resistant materials: They are usually made of durable materials such as stainless steel or brass to resist pressure and wear. Safety marking: They must comply with safety regulations and be properly marked.</p><p> Compressed air quick couplers are common in all types of workshops, factories and industries and other industrial applications where compressed air is used to power pneumatic tools, machinery and other equipment. Even at a private level...</p>
  • COOLING QUICK PLUGS

    COOLING QUICK PLUGS

    <h2>Cooling quick plugs. Buy online at the best price</h2><p> A <strong>refrigeration quick plug</strong> is a component used in refrigeration systems, especially in air conditioning and industrial refrigeration applications. Its primary function is to allow quick connection and disconnection of refrigerant lines without losing refrigerant or compromising system integrity. It can be used to connect and disconnect with one hand.</p><p> The coolant is usually used mostly water, glycol or in some cases thermal oil. Widely used in the industry where plastic molds or injections are made. They are characterized by greater resistance to heating and cooling of liquids and high performance while maintaining small dimensions.</p><p> Its key advantage is resistance to the effects of, among others, glycol, hot water or thermal oil, as well as other substances that are often handled with injection molding machines. These quick plugs consist of two parts: the male plug or adapter and the female socket or also called plug. The male part has a nipple that inserts into the female socket, and they usually have a locking slide that secures the connection. This allows the cooling fluid to flow efficiently and prevents leaks.</p><p> These quick plugs (some models) are typically designed with a valve mechanism that opens and closes securely to prevent refrigerant leaks. Other models do not have a valve. They are useful in situations where maintenance, repairs or refrigerant recharge are needed in a refrigeration system.</p><p> They are built with the Body in nickel-plated brass, the spring and balls in stainless steel and the Joints in NBR-VITON. Service temperature -15 / 125 ºC, and in some cases it can reach 200ºC. Working pressure 10 bar. Possibility of identifying plugs using colored rings. To identify hot or cold water circuits.</p>
  • REUSABLE BRAKE FITTINGS

    REUSABLE BRAKE FITTINGS

    <h2>Reusable brake fittings. Buy online at the best price</h2><p> Reusable brake fittings are common components in automobile and motorcycle braking systems. These fittings are pieces that allow you to connect the brake lines in a safe and reusable way. They are usually made of strong materials such as stainless steel to ensure durability and safety in the brake system.</p><p> The tube used in this type of brake fittings is internally made of Teflon Ø 3/16". Recommended for all types of brake fluids, DOT-3, DOT-4, DOT4+(plus) Minimum radius of curvature 20 mm. Pressure breaking pressure 900 bar. Temperature -73 / 230ºC. The fittings are made of 95 Mn Steel Pb. 36 UNI 10233/4 with a white metal coating. They withstand a pressure of 500 bar.</p><p> Reusable brake fittings are typically made from high-quality materials such as stainless steel or aluminum to ensure corrosion resistance and durability. Fittings come in different sizes and types of connections, such as threads or ogive or spherical coupling systems. You have to select the type that suits your specific application.</p><p> These brake fittings are designed to be reused, meaning you can connect and disconnect the brake lines multiple times without deterioration in performance.</p><p> In terms of Safety, it is crucial to ensure that reusable brake fittings are installed safely and properly to avoid brake fluid leaks and possible system failures. They must be mounted safely.</p><p> Reusable brake fittings are popular in custom or high performance braking applications as they allow for easier installation and custom adjustments.</p>
  • CAMLOCK FITTINGS

    CAMLOCK FITTINGS

    <h2>Camlock fittings. Buy online at the best price</h2><p> A <strong>camlock fitting</strong> is a type of quick connect commonly used in industrial applications to connect hoses, pipes and equipment. These connections are known for their ease of use and durability. Camlock fittings consist of two parts: the female coupling and the male coupling, which connect together safely and quickly. The circumferential grooves of the male camlock fittings align perfectly with the cams of the female camlock fittings at the end of each of their levers, creating a tight seal between the hoses. This cam and groove style is ideal for quick connecting and disconnecting.</p><p> These fittings are widely used in industries such as chemicals, agriculture, construction, oil and gas, as well as pumping services, as they allow quick connection and disconnection without the need for tools. They are typically available in a variety of materials, such as stainless steel, aluminum, brass, and polypropylene, making them suitable for different applications and environments.</p><p> The manufacturing measurements of <strong>camlock fittings-links</strong> range from ½” to 6”. Gaskets are manufactured in various materials and configurations (NBR, EPDM, Viton, Silicone, PTFE, Sandwich, Encapsulated). BSP and NPT threads. Possibility of having a camlock fitting with safety handles to avoid accidents or involuntary disassembly. These safety camlock fittings have a special fixing system on the handles using a bolt that is activated by a spring, preventing the fitting from accidentally coming loose. Its handling is quick and simple, greatly reducing the possibility of accidental opening of the fitting.</p><p> Highly valued by Occupational Risk Prevention departments.</p>
  • FITTINGS-LINKS BARCELONA

    FITTINGS-LINKS BARCELONA

    <h2>Barcelona links. Buy online at the best price</h2><p> The Barcelona type fitting-link is a specific type of link used in pressure piping installations and systems. These connections are also known as compression fittings or pressure fittings, and are common in water systems and installations.</p><p> Barcelona type fittings or links are especially popular in Spain, they are standardized under the UNE 23,400 regulations since they were designed in Spain, they have also been installed in some other regions of Europe. These fittings are designed to connect copper or high-density polyethylene (HDPE) pipes safely and hermetically without the need for welding.</p><p> They are threaded or to be inserted into hoses or pipes. They are easy to install and disassemble. You only need to turn the fitting or link a quarter turn to connect or disconnect, making them convenient for repairs and modifications to piping systems.</p><p> This system is based on three claws that link with each other since they are symmetrical. Quick and easy system and through a built-in gasket, it prevents loss with good sealing. These gaskets are completely interchangeable when they are already worn. They are basically made of aluminum and brass, completely compatible with water and have 4 sizes, 25, 45, 70 and 100 mm and can be combined with threads, either male, female or for hoses.</p><p> Barcelona fittings or links are basically used wherever there is a water circuit or system, be it hoses, BIES, fire hydrants, fire equipment, fire fighting equipment, hydrants, etc.</p>
  • GUILLEMIN FITTINGS AND LINKS

    GUILLEMIN FITTINGS AND LINKS

    <h2>Guillemin fittings. Buy online at the best price</h2><p> Guillemin fittings are a type of coupling used for connecting hoses and equipment. For liquid, solid or granular products. It is used for both impulsion and suction. These fittings are known for their ease of use and their ability to connect quickly and securely. It is a symmetrical coupling system, which means that both halves are identical.</p><p> Guillemin fittings or links have locking rings to connect and secure the other half, one of the two parts must have the ring to be able to secure the connection. Between the two joints of guillemín links to make sealing, it incorporates a gasket, in this case it can be made of various materials to adapt to any application, NBR, Viton, EPDM, PTFE, etc.</p><p> Guillemin fittings have a bayonet design that allows for quick and secure connection without the need for special tools. They are available in a variety of materials, such as AISI 316L Stainless Steel (NF A 35.572), Aluminum (A.U5GTY34 “ALUFRAN LABEL”), Bronze (NF A 53.707) and Polypropylene (Reinforced with 30% fiberglass) which makes them makes them suitable for different applications and environments.</p><p> It is important to note that Guillemin fittings are compatible with other fittings of the same type, making them easy to integrate into existing systems. They can also be found in different sizes and types of connections, such as male or female threads type BSP ISO 228, which comply with the NFE03.005 a and DIN 259 or NPT standard, or for mounting on tubes and hoses, which allows them to be adapted to specific needs. of each application. They withstand a pressure of 16 bar.</p><p> They are often used in industrial applications, such as the transfer of liquids, chemicals and fluids. And they are used for many sectors, chemistry, agricultural industry, tanker transport, mining, food industries, pharmaceutical industry, transport and suction work or delivery of liquids or powdery products, oil industry, fire fighting.</p>
  • POLYAMIDE SPIN FITTING

    POLYAMIDE SPIN FITTING

    <h2>Polyamide Spike Fittings. Buy online at the best prices</h2><p> A polyamide barb fitting is a connecting piece used in many applications for joining tubes or hoses. They are made of white polyamide, which is a type of resistant and durable plastic. These fittings are used to join tubes or hoses of different sizes or materials. They can have different shapes and sizes depending on the specific application. Its weight is very low and it is resistant to impacts.</p><p> Polyamide barb fittings are common in irrigation systems, compressed air systems, water systems and industrial applications where a secure and corrosion resistant connection is required. They are designed to be easy to install and provide a tight connection. They withstand a pressure of 10 bar and work at a temperature between -40ºC to 90ºC</p>
  • STORZ FITTINGS

    STORZ FITTINGS

    <h2>Storz fittings. Buy online at the best prices</h2><p> A <strong>Storz fitting</strong> is a type of fitting or coupling used in fire fighting equipment and water supply systems. It is designed to be quick and efficient in connecting and disconnecting hoses and accessories. Storz fittings are known for their threadless mating capabilities and tight sealing capabilities.</p><p> These fittings are named after their inventor, Carl August Guido Storz. <strong>Storz fittings</strong> are commonly used on firefighting equipment, tank trucks, and in industrial applications where secure and quick connection of hoses is required. They are made of aluminum according to DIN-14317 DIN-14318 NEN-6674 standard. They withstand a pressure of 16 bar.</p><p> The main feature of a Storz fitting is its symmetrical design that allows it to be attached in any orientation, making it very versatile and easy to use in emergency situations. To join (separate or release) it is only necessary to rotate the fitting half a turn. It is recommended to use a key.</p><p> Additionally, Storz fittings are often available in different sizes to suit various applications. They range in size from ¾” to 6”. They are available in male thread, female thread and for hose. Apart from plugs, reductions etc...</p><p> To achieve a very good seal, incorporate a completely interchangeable gasket made of different materials, to adapt to the different fluids and temperatures that circulate.</p><p> In summary, a Storz fitting is an essential component in fire fighting equipment and water supply systems that allows for quick and secure connection of hoses and accessories.</p>
  • EURORAPID BALL LINK

    EURORAPID BALL LINK

    <p>Ball joint links are connections for transferring liquids, made of stainless steel or steel. Very good sealing through O-ring. Great durability. Used in industry, construction, irrigation and agriculture. The mounting system is simple and quick using a lever and connecting hook. No tools required for assembly. We have all the measurements, 30-40-50-60-70-75-80-90-100-110-125-150-200 and 250 mm</p>
  • PREVOST PPS PROFILE FITTINGS

    PREVOST PPS PROFILE FITTINGS

    <h2>Prevost PPS profile fittings. Buy online at the best price</h2><p> The Prevost PPS system (PREVOST PIPING SYSTEM) allows compressed air energy to be distributed directly to the workplace with an ergonomic, modular, compact, resistant and aesthetic design. Made of 100% aluminum, in which we can select 2 colors, gray (aluminum) or blue.</p><p> The elements, connections and bars can be mounted on any aluminum structural profile that has an 8 mm slot or channel, since the design of the PPS profile section includes this 8 mm slot for the insertion of nuts, socket head screws. hammer and other accessories</p><p> The workstations are well-fed, individual, to place automatic work lines, they are accessible and ergonomic. The installation is sustainable and can be easily upgraded.</p><p> Fully modular system. Wide range of accessories. A fully atex 1-2 (gas) 21-22 (dust) air treatment equipment can be optionally installed.</p><p> The products are validated and certified by TÜV - They comply with the QUALICOAT requirements, the REACH standard, the standard for fire classification of construction products and elements (EN 13501 - 1)</p><p> The Prevost Piping System range (link to Landing PPS) guarantees:</p><ul style="list-style-type:disc;"><li> Working temperature -20ºC / 80ºC</li><li> always clean and quality air</li><li> a sealed network and optimized flow.</li><li> an operating pressure between -0.98 and 16 bar. Suitable for working empty.</li></ul><p> The Prevost PPS system is designed to be installed in any industry where there are tables and assembly rooms where compressed air is required.</p>

At Disumtec we have in stock all types of fittings, links and industrial accessories, in different qualities: stainless, brass, aluminum, polypropylene, etc., with availability of the gaskets associated with each fitting (NBR, FKM, EPDM, PTFE, etc. .), and with the possibility of the most used threads (BSP and NPT).

We have camlocks, with a quick connection system with a flat seat and gasket in the material required.

The symmetrical Guillemin fittings face each other, achieving tightness through the pressure exerted on the elastomeric gasket. In this type of fitting, one of the connections must have a closure.

Storz fittings are symmetrical fittings with a bayonet lock that is protected with a collar.

E Bauer fitting, zinc-plated or stainless steel fitting, for use in general industry. Very widespread in cement transportation. Both in cisterns and in fixed installations. Its stainless steel version is valid for drinking water and the chemical or food industry.

We have safety clamps and DIN 2817 fittings. The DIN 2817 fitting or safety fitting is composed of a shaft with a male thread or idler nut and a removable clamp.

Express fittings are symmetrical fittings and are useful for applications in air at a nominal pressure of 16 bar.

NW stainless fittings are manufactured according to DIN 11851 standard, suitable for use in the food, chemical and pharmaceutical industries.

Clamp fittings or Manual Disconnect Quick Coupling Fittings for those applications where hoses need to be changed frequently. Available in mm and inches.

Schedule 10/40 stainless steel welding fittings.

Victaulic fittings or fittings for fire protection installations in various qualities.

We have a complete range of instant fittings for the high pressure misting system.

Read more

Menu

Settings