Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
NG-6 MODULAR LIMITING VALVE

NG-6 MODULAR LIMITING VALVE

NG-6 pressure limiting valve It serves to prevent a certain pre-set pressure from exceeding

  • Pressure range 5...315 bar. (SPECIFY PRESSURE)
  • Flow rate 35 l/min.
  • Temperature -20ºC / 70ºC

€145.20 (tax included)
€120.00 (tax excl.)
SELECT TYPE
  • TO
  • b
  • A-B
  • Q
Reference:
49510032
Description

VALVULA LIMITADORA MODULAR NG-6

Product Details
49510032
Comments
Related products
BASE PLATE NG-6 LOWER OUTLET BASE PLATE NG-6 LOWER OUTLET

€49.20 (tax excl.)
€59.53 (tax included)
The NG-6 bottom outlet base plate serves as a support and connection for one or more NG-6 solenoid valves. On this type of plate, the solenoid valves' fluid inlet and outlet connections are located on the bottom....
NG-10 SIDE BASE PLATE NG-10 SIDE BASE PLATE

€75.03 (tax excl.)
€90.79 (tax included)
A lateral NG-10 base plate serves as a mounting and connection interface for solenoid valves and other NG-10 (CETOP 5) sized hydraulic components. Connection ports for hydraulic lines are located on the sides of the...
NG-6 MODULAR FLOW REGULATOR NG-6 MODULAR FLOW REGULATOR

€75.00 (tax excl.)
€90.75 (tax included)
An NG-6 modular flow regulator is a hydraulic device used to control and regulate oil flow in a hydraulic system. It is a modular component that is part of a family of NG modular valves. Applications: Machine tools,...
12 other products in the same category:
NG-6 SINGLE OVERCENTER VALVE

€85.00 (tax excl.)
€102.85 (tax included)
The NG-6 simple overcenter valve is used to control the movement and block the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since...
LEVER VALVE NG-6 4/3 CENTER H LOCKABLE

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
NG-10 DOUBLE OVERCENTER VALVE

€319.00 (tax excl.)
€385.99 (tax included)
The NG-10 double overcenter valve is used to control movement and lock the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since the...
NG-6 MODULAR NON-RETURN VALVE

€52.50 (tax excl.)
€63.53 (tax included)
A NG-6 modular check valve is a hydraulic component that allows fluid flow in only one direction, preventing it from backing up. It is used in hydraulic systems to prevent fluid from returning to the pump or other...
NG-6 PARALLEL CROSS SPRING LEVER VALVE

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
NG-6 4/3 CENTER H SPRING LEVER VALVE

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
ATOS DH 0901/2 PNEUMATIC PILOT DISTRIBUTOR

€350.00 (tax excl.)
€423.50 (tax included)
An ATOS DH 0901/2 pneumatic pilot operated distributor is a hydraulic directional valve designed to control the flow of oil in hydraulic systems. Applications: industrial machinery, mobile equipment, automation...
NG-6 4/3 LEVER VALVE CLOSED CENTER LOCKABLE

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
NG-10 MODULAR LIMITING VALVE

€168.75 (tax excl.)
€204.19 (tax included)
A NG-10 modular relief valve is a hydraulic component designed to protect a circuit or section of a hydraulic system from excessive pressure by diverting unnecessary oil flow when the pressure exceeds a preset maximum...
NG-6 4/3 CENTER A-B-T SPRING LEVER VALVE

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
NG-6 4/3 CENTER P-T SPRING LEVER VALVE

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
REXROTH R933000030 12VDC COIL

€20.00 (tax excl.)
€24.20 (tax included)
The Rexroth R933000030 12VDC coil is an electromechanical component used in hydraulic valves. Its function is to activate or deactivate oil flow in a hydraulic circuit upon receiving an electrical signal....
Recently Viewed
NG-6 MODULAR LIMITING VALVE

€145.20 (tax included)
€120.00 (tax excl.)
NG-6 pressure limiting valve It serves to prevent a certain pre-set pressure from exceeding Pressure range 5...315 bar. (SPECIFY PRESSURE) Flow rate 35 l/min. Temperature -20ºC / 70ºC
MINI FLAT BLOW NOZZLE

€20.00 (tax excl.)
€24.20 (tax included)
The mini flat blow nozzle is a compressed air accessory designed to generate a high velocity, focused, flat air stream. It is suitable when blowing is required in hard-to-reach areas or tight spaces. Applications:...
BRASS MALE-MALE REDUCER

€0.96 (tax excl.)
€1.16 (tax included)
A male-to-male brass reduction fitting is used to join two sections of pipe of different diameters with female threads. Its function is to adapt the diameter of one pipe to that of another of a smaller diameter....
SPZ TRAPEZOIDAL BELT

€4.21 (tax excl.)
€5.09 (tax included)
The SPZ V-belt is a mechanical transmission system that increases the frictional force between the belt and the pulley. Energy is obtained from the friction of a belt with two or more pulleys as they rotate. Technical...
SINGLE-PHASE ELECTRIC ACTUATOR 24-240V AC-DC

€200.00 (tax excl.)
€242.00 (tax included)
Single-phase reversible electric actuator 24-240v ac/dc 90° rotation design (optionally 180° - 270°) It incorporates thermal temperature control. Electrical torque control. (In case of excessive torque, the power...
SELF-PRIMING ELECTRIC PUMP 56 lmin

€222.00 (tax excl.)
€268.62 (tax included)
Technical data Connection cable (m): 1.8 Suction connection: G 1'' i Supply connection: G 1'' i Information: Blade pump, "self-suction" Flow rate with free discharge (l/min): 56 Suction height (m): 4 Supply pressure...

Menu

Please sign in first.

Sign in