Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
NG-6 4/3 LEVER VALVE CLOSED CENTER LOCKABLE
NG-6 4/3 LEVER VALVE CLOSED CENTER LOCKABLE
NG-6 4/3 LEVER VALVE CLOSED CENTER LOCKABLE
NG-6 4/3 LEVER VALVE CLOSED CENTER LOCKABLE
NG-6 4/3 LEVER VALVE CLOSED CENTER LOCKABLE
NG-6 4/3 LEVER VALVE CLOSED CENTER LOCKABLE
NG-6 4/3 LEVER VALVE CLOSED CENTER LOCKABLE
NG-6 4/3 LEVER VALVE CLOSED CENTER LOCKABLE

NG-6 4/3 LEVER VALVE CLOSED CENTER LOCKABLE

NG-6 LEVER VALVE

  • NG-6 Modular Valve
  • Maximum working pressure 315 bar.
  • Flow rate 60 l/min.
  • Temperature -30/80ºC.

Download Technical Catalog

€102.85 (tax included)
€85.00 (tax excl.)
Reference:
471508
Description

NG-6 LEVER VALVE

Product Details
471508
Comments
Related products
NG-6 BLOCK WITH LIMITER NG-6 BLOCK WITH LIMITER

€118.00 (tax excl.)
€142.78 (tax included)
An NG-6 manifold with a pressure relief valve is used to safely and efficiently mount and control multiple NG-6 solenoid valves. This type of manifold incorporates a pressure relief valve, making it an ideal solution...
BASE PLATE NG-6 SIDE OUTLET BASE PLATE NG-6 SIDE OUTLET

€44.75 (tax excl.)
€54.15 (tax included)
The NG-6 side outlet base plate in hydraulic systems serves as a support and connection for one or more NG-6 solenoid valves. The fluid inlet and outlet of the solenoid valves is located laterally. Definition: Made of...
BASE PLATE NG-6 LOWER OUTLET BASE PLATE NG-6 LOWER OUTLET

€49.20 (tax excl.)
€59.53 (tax included)
The NG-6 bottom outlet base plate serves as a support and connection for one or more NG-6 solenoid valves. On this type of plate, the solenoid valves' fluid inlet and outlet connections are located on the bottom....
SOLENOID VALVE NG-6 4/2 CROSS H SOLENOID VALVE NG-6 4/2 CROSS H

€40.00 (tax excl.)
€48.40 (tax included)
An NG-6 4/2 H-type crossover solenoid valve is used to precisely control the flow of pressurized oil. It has four ports and two positions: open and closed. The H-type crossover configuration, along with the valve's...
NG-6 BLOCK WITH VENTING AND LIMITING GEAR NG-6 BLOCK WITH VENTING AND LIMITING GEAR

€281.40 (tax excl.)
€340.49 (tax included)
An NG-6 block with a vent and pressure relief valve is a modular component designed to efficiently and safely integrate multiple NG-6 solenoid valves into a hydraulic system. The vent valve allows for controlled...
12 other products in the same category:
NG-6 4/3 CENTER P-T SPRING LEVER VALVE

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
LEVER VALVE NG-6 4/3 CENTER A-B-T LOCKABLE

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
LEVER VALVE NG-6 4/3 CENTER H LOCKABLE

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
NG-6 MODULAR NON-RETURN VALVE

€52.50 (tax excl.)
€63.53 (tax included)
A NG-6 modular check valve is a hydraulic component that allows fluid flow in only one direction, preventing it from backing up. It is used in hydraulic systems to prevent fluid from returning to the pump or other...
NG-6 PARALLEL CROSS SPRING LEVER VALVE

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
NG-10 DOUBLE OVERCENTER VALVE

€319.00 (tax excl.)
€385.99 (tax included)
The NG-10 double overcenter valve is used to control movement and lock the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since the...
NG-6 4/3 CENTER H SPRING LEVER VALVE

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
NG-6 4/2 CROSS H LEVER VALVE WITH LOCKING

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
NG-10 MODULAR NON-RETURN VALVE

€80.00 (tax excl.)
€96.80 (tax included)
A modular NG-10 check valve is a hydraulic component designed to ensure fluid flow moves in one direction only, automatically blocking any attempt to return in the opposite direction. Applications: Cylinder clamping...
NG-6 4/2 PARALLEL CROSS LEVER VALVE LOCKABLE

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
NG-10 MODULAR FLOW REGULATOR

€225.00 (tax excl.)
€272.25 (tax included)
A NG-10 modular flow regulator is a hydraulic component designed to control the speed of actuators. Applications: Heavy machinery, Hydraulic presses, Automation systems, Plastic injection or casting machinery....
NG-6 4/3 CENTER A-B-T SPRING LEVER VALVE

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
Recently Viewed
NG-6 4/3 LEVER VALVE CLOSED CENTER LOCKABLE

€102.85 (tax included)
€85.00 (tax excl.)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
MANOMETER Ø100 CENTRAL THREAD 1/2" GLYCERINE RING

€30.40 (tax excl.)
€36.78 (tax included)
A Ø100 pressure gauge with 1/2" central thread and glycerin ring is a pressure measuring instrument designed to offer high visibility and reading stability, especially in systems subject to vibrations or pulsations....
FOOD GRADE STAINLESS STEEL TUBE DIN-11851-2

€65.00 (tax excl.)
€78.65 (tax included)
Food grade stainless steel tube DIN-11851-2 It guarantees the chemical composition and mechanical properties of sanitary pipes. Quality Inspection : PMI to verify material grade. Dimension control. 100% visual and...
UNI ISO 6150 B-12 FEMALE ADAPTER

€1.20 (tax excl.)
€1.45 (tax included)
UNI ISO 6150 B-12 female adapter It complies with the international standard ISO 6150. It has a female thread at one end. It is easy to install and remove. Applications: industry, pneumatics, laboratories. Technical...
MINIATURE STRAIGHT TUBE UNION

€2.06 (tax excl.)
€2.49 (tax included)
A miniature straight pipe union is a small connector designed to join two pipes in a straight line in systems where space is limited and small diameter pipes are used. Technical sheet: Acetal resin body. Nickel-plated...
ROLLER SANDER 4022

€287.05 (tax excl.)
€347.33 (tax included)
The 4022 roller sander is a pneumatic tool for quickly and efficiently sanding large, flat surfaces. Unlike orbital or belt sanders, which use an oscillating or linear motion, the AR4022 uses a roller coated with...

Menu

Please sign in first.

Sign in