Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
NG-6 4/3 CENTER H SPRING LEVER VALVE
NG-6 4/3 CENTER H SPRING LEVER VALVE
NG-6 4/3 CENTER H SPRING LEVER VALVE
NG-6 4/3 CENTER H SPRING LEVER VALVE
NG-6 4/3 CENTER H SPRING LEVER VALVE
NG-6 4/3 CENTER H SPRING LEVER VALVE
NG-6 4/3 CENTER H SPRING LEVER VALVE
NG-6 4/3 CENTER H SPRING LEVER VALVE

NG-6 4/3 CENTER H SPRING LEVER VALVE

NG-6 LEVER VALVE

  • NG-6 Modular Valve
  • Maximum working pressure 315 bar.
  • Flow rate 60 l/min.
  • Temperature -30/80ºC.

Download Technical Catalog

€102.85 (tax included)
€85.00 (tax excl.)
Reference:
471502
Description

NG-6 LEVER VALVE

Product Details
471502
Comments
Related products
NG-6 BLOCK WITH LIMITER NG-6 BLOCK WITH LIMITER

€118.00 (tax excl.)
€142.78 (tax included)
An NG-6 manifold with a pressure relief valve is used to safely and efficiently mount and control multiple NG-6 solenoid valves. This type of manifold incorporates a pressure relief valve, making it an ideal solution...
BASE PLATE NG-6 SIDE OUTLET BASE PLATE NG-6 SIDE OUTLET

€44.75 (tax excl.)
€54.15 (tax included)
The NG-6 side outlet base plate in hydraulic systems serves as a support and connection for one or more NG-6 solenoid valves. The fluid inlet and outlet of the solenoid valves is located laterally. Definition: Made of...
BASE PLATE NG-6 LOWER OUTLET BASE PLATE NG-6 LOWER OUTLET

€49.20 (tax excl.)
€59.53 (tax included)
The NG-6 bottom outlet base plate serves as a support and connection for one or more NG-6 solenoid valves. On this type of plate, the solenoid valves' fluid inlet and outlet connections are located on the bottom....
SOLENOID VALVE NG-6 4/2 CROSS H SOLENOID VALVE NG-6 4/2 CROSS H

€40.00 (tax excl.)
€48.40 (tax included)
An NG-6 4/2 H-type crossover solenoid valve is used to precisely control the flow of pressurized oil. It has four ports and two positions: open and closed. The H-type crossover configuration, along with the valve's...
NG-6 BLOCK WITH VENTING AND LIMITING GEAR NG-6 BLOCK WITH VENTING AND LIMITING GEAR

€281.40 (tax excl.)
€340.49 (tax included)
An NG-6 block with a vent and pressure relief valve is a modular component designed to efficiently and safely integrate multiple NG-6 solenoid valves into a hydraulic system. The vent valve allows for controlled...
12 other products in the same category:
NG-10 MODULAR LIMITING VALVE

€168.75 (tax excl.)
€204.19 (tax included)
A NG-10 modular relief valve is a hydraulic component designed to protect a circuit or section of a hydraulic system from excessive pressure by diverting unnecessary oil flow when the pressure exceeds a preset maximum...
NG-6 4/2 PARALLEL CROSS LEVER VALVE LOCKABLE

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
DOUBLE NG-6 OVERCENTER (BALANCE) VALVE

€94.00 (tax excl.)
€113.74 (tax included)
The NG-6 double overcenter valve is used to control movement and lock the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since the...
SINGLE OVERCENTER (BALANCE) VALVE NG-10

€290.00 (tax excl.)
€350.90 (tax included)
A single overcenter valve NG-10 is used to control movement and lock the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since the...
NG-6 4/3 CLOSED CENTER SPRING LEVER VALVE

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
NG-6 SINGLE OVERCENTER VALVE

€85.00 (tax excl.)
€102.85 (tax included)
The NG-6 simple overcenter valve is used to control the movement and block the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since...
NG-10 DOUBLE OVERCENTER VALVE

€319.00 (tax excl.)
€385.99 (tax included)
The NG-10 double overcenter valve is used to control movement and lock the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since the...
NG-10 MODULAR NON-RETURN VALVE

€80.00 (tax excl.)
€96.80 (tax included)
A modular NG-10 check valve is a hydraulic component designed to ensure fluid flow moves in one direction only, automatically blocking any attempt to return in the opposite direction. Applications: Cylinder clamping...
NG-6 PARALLEL CROSS SPRING LEVER VALVE

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
NG-6 4/2 CROSS H LEVER VALVE WITH LOCKING

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
REXROTH R933000030 12VDC COIL

€20.00 (tax excl.)
€24.20 (tax included)
The Rexroth R933000030 12VDC coil is an electromechanical component used in hydraulic valves. Its function is to activate or deactivate oil flow in a hydraulic circuit upon receiving an electrical signal....
NG-6 MODULAR NON-RETURN VALVE

€52.50 (tax excl.)
€63.53 (tax included)
A NG-6 modular check valve is a hydraulic component that allows fluid flow in only one direction, preventing it from backing up. It is used in hydraulic systems to prevent fluid from returning to the pump or other...
Recently Viewed
NG-6 4/3 CENTER H SPRING LEVER VALVE

€102.85 (tax included)
€85.00 (tax excl.)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
HYDRAULIC WATER-OIL COOLER Ø133

€550.00 (tax excl.)
€665.50 (tax included)
A Ø133 water-oil hydraulic cooler is a heat exchanger specifically designed to cool hydraulic oil using water as a cooling medium. Applications: Industrial machinery, Mobile machinery, Stationary hydraulic systems...
2-WAY HYDRAULIC SOLENOID VALVE COIL

€15.00 (tax excl.)
€18.15 (tax included)
A solenoid valve coil is used to actuate directional valves in pneumatic and hydraulic systems. Applications: Automation machinery, Process control systems, HVAC and Refrigeration, Mobile equipment, Automated...

Menu

Please sign in first.

Sign in