Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
NG-6 PARALLEL CROSS SPRING LEVER VALVE
NG-6 PARALLEL CROSS SPRING LEVER VALVE
NG-6 PARALLEL CROSS SPRING LEVER VALVE
NG-6 PARALLEL CROSS SPRING LEVER VALVE
NG-6 PARALLEL CROSS SPRING LEVER VALVE
NG-6 PARALLEL CROSS SPRING LEVER VALVE
NG-6 PARALLEL CROSS SPRING LEVER VALVE
NG-6 PARALLEL CROSS SPRING LEVER VALVE

NG-6 PARALLEL CROSS SPRING LEVER VALVE

NG-6 LEVER VALVE

  • NG-6 Modular Valve
  • Maximum working pressure 315 bar.
  • Flow rate 60 l/min.
  • Temperature -30/80ºC.

Download Technical Catalog

€102.85 (tax included)
€85.00 (tax excl.)
Reference:
471501
Description

NG-6 LEVER VALVE

Product Details
471501
Comments
Related products
NG-6 BLOCK WITH LIMITER NG-6 BLOCK WITH LIMITER

€118.00 (tax excl.)
€142.78 (tax included)
An NG-6 manifold with a pressure relief valve is used to safely and efficiently mount and control multiple NG-6 solenoid valves. This type of manifold incorporates a pressure relief valve, making it an ideal solution...
BASE PLATE NG-6 SIDE OUTLET BASE PLATE NG-6 SIDE OUTLET

€44.75 (tax excl.)
€54.15 (tax included)
The NG-6 side outlet base plate in hydraulic systems serves as a support and connection for one or more NG-6 solenoid valves. The fluid inlet and outlet of the solenoid valves is located laterally. Definition: Made of...
BASE PLATE NG-6 LOWER OUTLET BASE PLATE NG-6 LOWER OUTLET

€49.20 (tax excl.)
€59.53 (tax included)
The NG-6 bottom outlet base plate serves as a support and connection for one or more NG-6 solenoid valves. On this type of plate, the solenoid valves' fluid inlet and outlet connections are located on the bottom....
SOLENOID VALVE NG-6 4/2 CROSS H SOLENOID VALVE NG-6 4/2 CROSS H

€40.00 (tax excl.)
€48.40 (tax included)
An NG-6 4/2 H-type crossover solenoid valve is used to precisely control the flow of pressurized oil. It has four ports and two positions: open and closed. The H-type crossover configuration, along with the valve's...
NG-6 BLOCK WITH VENTING AND LIMITING GEAR NG-6 BLOCK WITH VENTING AND LIMITING GEAR

€281.40 (tax excl.)
€340.49 (tax included)
An NG-6 block with a vent and pressure relief valve is a modular component designed to efficiently and safely integrate multiple NG-6 solenoid valves into a hydraulic system. The vent valve allows for controlled...
12 other products in the same category:
NG-6 MODULAR PRESSURE REDUCER

€168.75 (tax excl.)
€204.19 (tax included)
A modular NG-6 pressure reducer maintains a constant, preset output pressure in a portion of a hydraulic circuit, regardless of pressure fluctuations in the supply line. Applications: industrial machinery,...
NG-6 SINGLE OVERCENTER VALVE

€85.00 (tax excl.)
€102.85 (tax included)
The NG-6 simple overcenter valve is used to control the movement and block the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since...
NG-6 MODULAR LIMITING VALVE

€120.00 (tax excl.)
€145.20 (tax included)
NG-6 pressure limiting valve It serves to prevent a certain pre-set pressure from exceeding Pressure range 5...315 bar. (SPECIFY PRESSURE) Flow rate 35 l/min. Temperature -20ºC / 70ºC
NG-10 MODULAR PRESSURE REDUCER

€217.50 (tax excl.)
€263.18 (tax included)
A NG-10 modular pressure reducer is a hydraulic component designed to maintain a constant and controlled output pressure in a specific part of a hydraulic circuit. Applications: General Purpose Machinery, Construction...
NG-6 MODULAR FLOW REGULATOR

€75.00 (tax excl.)
€90.75 (tax included)
An NG-6 modular flow regulator is a hydraulic device used to control and regulate oil flow in a hydraulic system. It is a modular component that is part of a family of NG modular valves. Applications: Machine tools,...
NG-6 4/3 CENTER A-B-T SPRING LEVER VALVE

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
NG-10 DOUBLE OVERCENTER VALVE

€319.00 (tax excl.)
€385.99 (tax included)
The NG-10 double overcenter valve is used to control movement and lock the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since the...
NG-6 4/3 CENTER P-T SPRING LEVER VALVE

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
NG-10 MODULAR FLOW REGULATOR

€225.00 (tax excl.)
€272.25 (tax included)
A NG-10 modular flow regulator is a hydraulic component designed to control the speed of actuators. Applications: Heavy machinery, Hydraulic presses, Automation systems, Plastic injection or casting machinery....
ATOS DH 0901/2 PNEUMATIC PILOT DISTRIBUTOR

€350.00 (tax excl.)
€423.50 (tax included)
An ATOS DH 0901/2 pneumatic pilot operated distributor is a hydraulic directional valve designed to control the flow of oil in hydraulic systems. Applications: industrial machinery, mobile equipment, automation...
NG-10 MODULAR NON-RETURN VALVE

€80.00 (tax excl.)
€96.80 (tax included)
A modular NG-10 check valve is a hydraulic component designed to ensure fluid flow moves in one direction only, automatically blocking any attempt to return in the opposite direction. Applications: Cylinder clamping...
NG-6 4/3 CLOSED CENTER SPRING LEVER VALVE

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
Recently Viewed
NG-6 PARALLEL CROSS SPRING LEVER VALVE

€102.85 (tax included)
€85.00 (tax excl.)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog

Menu

Please sign in first.

Sign in