Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
SOLENOID VALVE NG-6 4/2 CROSS H

SOLENOID VALVE NG-6 4/2 CROSS H

An NG-6 4/2 H-type crossover solenoid valve is used to precisely control the flow of pressurized oil. It has four ports and two positions: open and closed. The H-type crossover configuration, along with the valve's other features, provides precise and versatile fluid flow control.

Applications: Hydraulic circuits, Machine tools, Pressing systems, Lifting systems.

Technical sheet:

  • CETOP-3 NG-6
  • Maximum pressure 315 bar.
  • Flow rate 80 l/min.
  • Available voltages 12Vdc - 24Vdc - 24Vac - 220V ac - 110Vac
  • Includes the 4 screws for fixing to the motherboard.

Supplied without coil

€48.40 (tax included)
€40.00 (tax excl.)
Reference:
4701
Description

NG-6 4/2 crossed solenoid valve H

Product Details
4701
Comments
Related products
BASE PLATE NG-6 LOWER OUTLET BASE PLATE NG-6 LOWER OUTLET

€49.20 (tax excl.)
€59.53 (tax included)
The NG-6 bottom outlet base plate serves as a support and connection for one or more NG-6 solenoid valves. On this type of plate, the solenoid valves' fluid inlet and outlet connections are located on the bottom....
NG-6 SOLENOID VALVE COIL NG-6 SOLENOID VALVE COIL

€23.22 (tax excl.)
€28.10 (tax included)
The NG-6 solenoid valve coil is located inside an NG-6 hydraulic solenoid valve. Its function is to convert electrical energy into magnetic energy to actuate an internal mechanism and, in this way, control the flow of...
NG-10 SIDE BASE PLATE NG-10 SIDE BASE PLATE

€75.03 (tax excl.)
€90.79 (tax included)
A lateral NG-10 base plate serves as a mounting and connection interface for solenoid valves and other NG-10 (CETOP 5) sized hydraulic components. Connection ports for hydraulic lines are located on the sides of the...
NG-6 BLOCK WITH VENTING AND LIMITING GEAR NG-6 BLOCK WITH VENTING AND LIMITING GEAR

€281.40 (tax excl.)
€340.49 (tax included)
An NG-6 block with a vent and pressure relief valve is a modular component designed to efficiently and safely integrate multiple NG-6 solenoid valves into a hydraulic system. The vent valve allows for controlled...
DIN-43650-A LED T-30 CONNECTOR DIN-43650-A LED T-30 CONNECTOR

€6.00 (tax excl.)
€7.26 (tax included)
The DIN-43650-A LED T-30 Connector is an electrical component designed for the fast and safe connection of cables in industrial and commercial applications. Applications: Machine control systems, outdoor lighting,...
12 other products in the same category:
MANUAL EMERGENCY POSITIONER

€35.00 (tax excl.)
€42.35 (tax included)
The manual emergency positioner is a system that can be used to move the slide of an NG-6 solenoid valve using the threaded push button that acts on the emergency button. It is mainly used when we have no voltage in...
REXROTH R933000030 12VDC COIL

€20.00 (tax excl.)
€24.20 (tax included)
The Rexroth R933000030 12VDC coil is an electromechanical component used in hydraulic valves. Its function is to activate or deactivate oil flow in a hydraulic circuit upon receiving an electrical signal....
BASE PLATE NG-6 LOWER OUTLET

€49.20 (tax excl.)
€59.53 (tax included)
The NG-6 bottom outlet base plate serves as a support and connection for one or more NG-6 solenoid valves. On this type of plate, the solenoid valves' fluid inlet and outlet connections are located on the bottom....
SOLENOID VALVE NG-6 4/3 CENTER H

€47.00 (tax excl.)
€56.87 (tax included)
An NG-6 4/3 center-h solenoid valve is used to precisely control the flow of pressurized oil. It is designed to operate in demanding industrial environments and withstand high pressures. It has four ports and three...
SOLENOID VALVE NG-6 4/2 PARALLEL CROSS

€40.00 (tax excl.)
€48.40 (tax included)
A 4/2 parallel crossover NG-6 solenoid valve precisely controls the flow of pressurized oil. It has four ports and two positions (open and closed). Applications: Hydraulic circuits, Machine tools, Pressing systems,...
NG-6 BLOCK WITH VENTING AND LIMITING GEAR

€281.40 (tax excl.)
€340.49 (tax included)
An NG-6 block with a vent and pressure relief valve is a modular component designed to efficiently and safely integrate multiple NG-6 solenoid valves into a hydraulic system. The vent valve allows for controlled...
NG-6 SOLENOID VALVE COIL

€23.22 (tax excl.)
€28.10 (tax included)
The NG-6 solenoid valve coil is located inside an NG-6 hydraulic solenoid valve. Its function is to convert electrical energy into magnetic energy to actuate an internal mechanism and, in this way, control the flow of...
BASE PLATE NG-6 SIDE OUTLET

€44.75 (tax excl.)
€54.15 (tax included)
The NG-6 side outlet base plate in hydraulic systems serves as a support and connection for one or more NG-6 solenoid valves. The fluid inlet and outlet of the solenoid valves is located laterally. Definition: Made of...
NG-6 BLINDING PLATE

€34.69 (tax excl.)
€41.97 (tax included)
An NG-6 blanking plate is used in hydraulic systems, specifically in NG-6 valve blocks. It is pressed into one of the cavities of an NG-6 block to seal a hydraulic port or passage. The O-rings are compressed, ensuring...
DIN-43650-A LED T-30 CONNECTOR

€6.00 (tax excl.)
€7.26 (tax included)
The DIN-43650-A LED T-30 Connector is an electrical component designed for the fast and safe connection of cables in industrial and commercial applications. Applications: Machine control systems, outdoor lighting,...
SOLENOID VALVE NG-6 4/3 CLOSED CENTER

€47.00 (tax excl.)
€56.87 (tax included)
The NG-6 4/3 closed-center solenoid valve precisely controls the flow of pressurized oil. It has four ports and three possible positions. In the center position, all ports are isolated, preventing fluid flow. It is...
ATOS DH 0901/2 PNEUMATIC PILOT DISTRIBUTOR

€350.00 (tax excl.)
€423.50 (tax included)
An ATOS DH 0901/2 pneumatic pilot operated distributor is a hydraulic directional valve designed to control the flow of oil in hydraulic systems. Applications: industrial machinery, mobile equipment, automation...
Recently Viewed
SOLENOID VALVE NG-6 4/2 CROSS H

€48.40 (tax included)
€40.00 (tax excl.)
An NG-6 4/2 H-type crossover solenoid valve is used to precisely control the flow of pressurized oil. It has four ports and two positions: open and closed. The H-type crossover configuration, along with the valve's...
ACL7595 CONSTANT LEVEL OILER

€66.90 (tax excl.)
€80.95 (tax included)
ACL7595 Constant Level Oiler Its function is to supply a precise and constant amount of grease to a specific lubrication point on a machine or equipment. It maintains a film of lubricant on moving surfaces, reducing...
BELL COUPLING GR-2

€14.75 (tax excl.)
€17.85 (tax included)
A GR-2 coupling bell is a mechanical component used to perfectly connect and align the shaft of an electric motor with the shaft of a hydraulic pump. Applications: hydraulic presses, machine tools, lifting equipment,...
ISO-6432 STAINLESS STEEL BOTTOM NUT

€2.05 (tax excl.)
€2.48 (tax included)
An ISO-6432 stainless steel end nut is a fixing and sealing element used in pneumatic mini-cylinders that comply with the ISO 6432 standard. Its function is to close the rear cylinder head. Applications: Machinery in...
PRESSURE GAUGE Ø100 LOWER THREAD 1/2" WITH GLYCERIN

€24.00 (tax excl.)
€29.04 (tax included)
A Ø100 pressure gauge with 1/2" bottom thread and glycerin is a pressure measuring instrument designed to offer high precision and durability in industrial systems. Applications: High-capacity air compressors, Process...
DIN 2817 STAINLESS STEEL MALE

€4.70 (tax excl.)
€5.69 (tax included)
DIN 2817 stainless steel male fitting with special spigot for two-part or four-bolt clamps (type RS). These fittings comply with EN14420-5 (DIN 2817), the same standard as the clamps. They are used to connect hoses to...

Menu

Please sign in first.

Sign in