Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
NG-6 4/2 CROSS H LEVER VALVE WITH LOCKING
NG-6 4/2 CROSS H LEVER VALVE WITH LOCKING
NG-6 4/2 CROSS H LEVER VALVE WITH LOCKING
NG-6 4/2 CROSS H LEVER VALVE WITH LOCKING
NG-6 4/2 CROSS H LEVER VALVE WITH LOCKING
NG-6 4/2 CROSS H LEVER VALVE WITH LOCKING
NG-6 4/2 CROSS H LEVER VALVE WITH LOCKING
NG-6 4/2 CROSS H LEVER VALVE WITH LOCKING

NG-6 4/2 CROSS H LEVER VALVE WITH LOCKING

NG-6 LEVER VALVE

  • NG-6 Modular Valve
  • Maximum working pressure 315 bar.
  • Flow rate 60 l/min.
  • Temperature -30/80ºC.

Download Technical Catalog

€102.85 (tax included)
€85.00 (tax excl.)
Reference:
471507
Description

NG-6 LEVER VALVE

Product Details
471507
Comments
Related products
NG-6 BLOCK WITH LIMITER NG-6 BLOCK WITH LIMITER

€118.00 (tax excl.)
€142.78 (tax included)
An NG-6 manifold with a pressure relief valve is used to safely and efficiently mount and control multiple NG-6 solenoid valves. This type of manifold incorporates a pressure relief valve, making it an ideal solution...
BASE PLATE NG-6 SIDE OUTLET BASE PLATE NG-6 SIDE OUTLET

€44.75 (tax excl.)
€54.15 (tax included)
The NG-6 side outlet base plate in hydraulic systems serves as a support and connection for one or more NG-6 solenoid valves. The fluid inlet and outlet of the solenoid valves is located laterally. Definition: Made of...
BASE PLATE NG-6 LOWER OUTLET BASE PLATE NG-6 LOWER OUTLET

€49.20 (tax excl.)
€59.53 (tax included)
The NG-6 bottom outlet base plate serves as a support and connection for one or more NG-6 solenoid valves. On this type of plate, the solenoid valves' fluid inlet and outlet connections are located on the bottom....
SOLENOID VALVE NG-6 4/2 CROSS H SOLENOID VALVE NG-6 4/2 CROSS H

€40.00 (tax excl.)
€48.40 (tax included)
An NG-6 4/2 H-type crossover solenoid valve is used to precisely control the flow of pressurized oil. It has four ports and two positions: open and closed. The H-type crossover configuration, along with the valve's...
NG-6 BLOCK WITH VENTING AND LIMITING GEAR NG-6 BLOCK WITH VENTING AND LIMITING GEAR

€281.40 (tax excl.)
€340.49 (tax included)
An NG-6 block with a vent and pressure relief valve is a modular component designed to efficiently and safely integrate multiple NG-6 solenoid valves into a hydraulic system. The vent valve allows for controlled...
12 other products in the same category:
NG-6 4/3 CLOSED CENTER SPRING LEVER VALVE

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
LEVER VALVE NG-6 4/3 CENTER A-B-T LOCKABLE

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
LEVER VALVE NG-6 4/3 CENTER P-T LOCKABLE

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
NG-10 MODULAR NON-RETURN VALVE

€80.00 (tax excl.)
€96.80 (tax included)
A modular NG-10 check valve is a hydraulic component designed to ensure fluid flow moves in one direction only, automatically blocking any attempt to return in the opposite direction. Applications: Cylinder clamping...
NG-10 DOUBLE OVERCENTER VALVE

€319.00 (tax excl.)
€385.99 (tax included)
The NG-10 double overcenter valve is used to control movement and lock the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since the...
NG-6 MODULAR LIMITING VALVE

€120.00 (tax excl.)
€145.20 (tax included)
NG-6 pressure limiting valve It serves to prevent a certain pre-set pressure from exceeding Pressure range 5...315 bar. (SPECIFY PRESSURE) Flow rate 35 l/min. Temperature -20ºC / 70ºC
SINGLE OVERCENTER (BALANCE) VALVE NG-10

€290.00 (tax excl.)
€350.90 (tax included)
A single overcenter valve NG-10 is used to control movement and lock the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since the...
NG-6 4/3 CENTER H SPRING LEVER VALVE

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
LEVER VALVE NG-6 4/3 CENTER H LOCKABLE

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
NG-6 SINGLE OVERCENTER VALVE

€85.00 (tax excl.)
€102.85 (tax included)
The NG-6 simple overcenter valve is used to control the movement and block the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since...
DOUBLE NG-6 OVERCENTER (BALANCE) VALVE

€94.00 (tax excl.)
€113.74 (tax included)
The NG-6 double overcenter valve is used to control movement and lock the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since the...
NG-10 MODULAR FLOW REGULATOR

€225.00 (tax excl.)
€272.25 (tax included)
A NG-10 modular flow regulator is a hydraulic component designed to control the speed of actuators. Applications: Heavy machinery, Hydraulic presses, Automation systems, Plastic injection or casting machinery....
Recently Viewed
NG-6 4/2 CROSS H LEVER VALVE WITH LOCKING

€102.85 (tax included)
€85.00 (tax excl.)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
LITHIUM COMPLEX GREASE CARTRIDGE 45110

€9.00 (tax excl.)
€10.89 (tax included)
The 45110 lithium complex grease cartridge is a high quality lubricating grease, specifically formulated based on lithium soap. It is used in a wide range of industrial applications including lubrication of bearings,...
POLYURETHANE HOSE WITH PVC SPIRAL

€2.15 (tax excl.)
€2.60 (tax included)
The polyurethane hose with PVC spiral is a flexible conduit made of high-strength polyurethane (PU) , reinforced with an internal rigid PVC spiral that provides excellent self-supporting structure. This design...
MINI MALE-FEMALE BRASS BALL VALVE

€5.40 (tax excl.)
€6.53 (tax included)
A male-female mini brass ball valve is a compact flow control valve, designed for installation in systems with limited space. Applications: Sanitary and heating installations, Compressed air systems, Instrumentation...
NICKEL-PLATED BRASS MALE-FEMALE REDUCER

€0.95 (tax excl.)
€1.15 (tax included)
A nickel-plated brass male-female reduction fitting is a connector used to join two pieces of pipe or hose with different diameters. It is made of nickel-plated brass, which is a corrosion- and wear-resistant...
C400 Spray Glue

€8.60 (tax excl.)
€10.41 (tax included)
C400 Spray Glue It is a chlorine-free contact adhesive. Universally applicable, strong, moisture-resistant, and high-temperature resistant. C 400 is ideal for permanent bonding. Dries in 3 minutes under normal...

Menu

Please sign in first.

Sign in