Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
LEVER VALVE NG-6 4/3 CENTER P-T LOCKABLE
LEVER VALVE NG-6 4/3 CENTER P-T LOCKABLE
LEVER VALVE NG-6 4/3 CENTER P-T LOCKABLE
LEVER VALVE NG-6 4/3 CENTER P-T LOCKABLE
LEVER VALVE NG-6 4/3 CENTER P-T LOCKABLE
LEVER VALVE NG-6 4/3 CENTER P-T LOCKABLE
LEVER VALVE NG-6 4/3 CENTER P-T LOCKABLE
LEVER VALVE NG-6 4/3 CENTER P-T LOCKABLE

LEVER VALVE NG-6 4/3 CENTER P-T LOCKABLE

NG-6 LEVER VALVE

  • NG-6 Modular Valve
  • Maximum working pressure 315 bar.
  • Flow rate 60 l/min.
  • Temperature -30/80ºC.

Download Technical Catalog

€102.85 (tax included)
€85.00 (tax excl.)
Reference:
471511
Description

NG-6 LEVER VALVE

Product Details
471511
Comments
Related products
NG-6 BLOCK WITH LIMITER NG-6 BLOCK WITH LIMITER

€118.00 (tax excl.)
€142.78 (tax included)
An NG-6 manifold with a pressure relief valve is used to safely and efficiently mount and control multiple NG-6 solenoid valves. This type of manifold incorporates a pressure relief valve, making it an ideal solution...
BASE PLATE NG-6 SIDE OUTLET BASE PLATE NG-6 SIDE OUTLET

€44.75 (tax excl.)
€54.15 (tax included)
The NG-6 side outlet base plate in hydraulic systems serves as a support and connection for one or more NG-6 solenoid valves. The fluid inlet and outlet of the solenoid valves is located laterally. Definition: Made of...
BASE PLATE NG-6 LOWER OUTLET BASE PLATE NG-6 LOWER OUTLET

€49.20 (tax excl.)
€59.53 (tax included)
The NG-6 bottom outlet base plate serves as a support and connection for one or more NG-6 solenoid valves. On this type of plate, the solenoid valves' fluid inlet and outlet connections are located on the bottom....
SOLENOID VALVE NG-6 4/2 CROSS H SOLENOID VALVE NG-6 4/2 CROSS H

€40.00 (tax excl.)
€48.40 (tax included)
An NG-6 4/2 H-type crossover solenoid valve is used to precisely control the flow of pressurized oil. It has four ports and two positions: open and closed. The H-type crossover configuration, along with the valve's...
NG-6 BLOCK WITH VENTING AND LIMITING GEAR NG-6 BLOCK WITH VENTING AND LIMITING GEAR

€281.40 (tax excl.)
€340.49 (tax included)
An NG-6 block with a vent and pressure relief valve is a modular component designed to efficiently and safely integrate multiple NG-6 solenoid valves into a hydraulic system. The vent valve allows for controlled...
12 other products in the same category:
REXROTH R933000030 12VDC COIL

€20.00 (tax excl.)
€24.20 (tax included)
The Rexroth R933000030 12VDC coil is an electromechanical component used in hydraulic valves. Its function is to activate or deactivate oil flow in a hydraulic circuit upon receiving an electrical signal....
NG-10 MODULAR LIMITING VALVE

€168.75 (tax excl.)
€204.19 (tax included)
A NG-10 modular relief valve is a hydraulic component designed to protect a circuit or section of a hydraulic system from excessive pressure by diverting unnecessary oil flow when the pressure exceeds a preset maximum...
NG-6 MODULAR PRESSURE REDUCER

€168.75 (tax excl.)
€204.19 (tax included)
A modular NG-6 pressure reducer maintains a constant, preset output pressure in a portion of a hydraulic circuit, regardless of pressure fluctuations in the supply line. Applications: industrial machinery,...
NG-10 DOUBLE OVERCENTER VALVE

€319.00 (tax excl.)
€385.99 (tax included)
The NG-10 double overcenter valve is used to control movement and lock the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since the...
DOUBLE NG-6 OVERCENTER (BALANCE) VALVE

€94.00 (tax excl.)
€113.74 (tax included)
The NG-6 double overcenter valve is used to control movement and lock the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since the...
LEVER VALVE NG-6 4/3 CENTER A-B-T LOCKABLE

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
NG-6 MODULAR NON-RETURN VALVE

€52.50 (tax excl.)
€63.53 (tax included)
A NG-6 modular check valve is a hydraulic component that allows fluid flow in only one direction, preventing it from backing up. It is used in hydraulic systems to prevent fluid from returning to the pump or other...
NG-6 MODULAR LIMITING VALVE

€120.00 (tax excl.)
€145.20 (tax included)
NG-6 pressure limiting valve It serves to prevent a certain pre-set pressure from exceeding Pressure range 5...315 bar. (SPECIFY PRESSURE) Flow rate 35 l/min. Temperature -20ºC / 70ºC
NG-6 4/3 CENTER H SPRING LEVER VALVE

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
NG-10 MODULAR FLOW REGULATOR

€225.00 (tax excl.)
€272.25 (tax included)
A NG-10 modular flow regulator is a hydraulic component designed to control the speed of actuators. Applications: Heavy machinery, Hydraulic presses, Automation systems, Plastic injection or casting machinery....
NG-6 PARALLEL CROSS SPRING LEVER VALVE

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
LEVER VALVE NG-6 4/3 CENTER H LOCKABLE

€85.00 (tax excl.)
€102.85 (tax included)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
Recently Viewed
LEVER VALVE NG-6 4/3 CENTER P-T LOCKABLE

€102.85 (tax included)
€85.00 (tax excl.)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
CENTRAL FEMALE TUBE PRESS INOX

€8.12 (tax excl.)
€9.83 (tax included)
A stainless steel press-fit female center pipe tee is distinguished by its female branch connection, unlike the other two ends, which are press-fit. It allows the connection of three pipe sections, with one section...
TELESCOPIC CYLINDER WITH 2 EXTENSIONS TLDB

€742.41 (tax excl.)
€898.32 (tax included)
TLDB series Telescopic Cylinders are linear actuators that make a stroke greater than the total length of the closed cylinder. The design concept of these cylinders is to insert one cylinder into another, so the...
ATOS DH 0901/2 PNEUMATIC PILOT DISTRIBUTOR

€350.00 (tax excl.)
€423.50 (tax included)
An ATOS DH 0901/2 pneumatic pilot operated distributor is a hydraulic directional valve designed to control the flow of oil in hydraulic systems. Applications: industrial machinery, mobile equipment, automation...
METAL SHOCK ABSORBER WITH 1 BASE

€31.62 (tax excl.)
€38.26 (tax included)
Metal shock absorber with 1 base A metal shock absorber with 1 base is a shock or vibration absorption element designed to reduce the transmission of shocks, vibrations or noise between a machine or equipment and its...
EQUIPPED FIRE HYDRANT (BIE)

€400.00 (tax excl.)
€484.00 (tax included)
An equipped fire hydrant (EFH) is a first-response fire extinguishing system designed to be used by building occupants in the initial stages of a fire. It is a fundamental element of fire protection in buildings and...

Menu

Please sign in first.

Sign in