The ISO-3322 AS front flange hydraulic cylinder is used to deliver force through a linear stroke. This energy is obtained from a pressurized hydraulic fluid, usually oil. It complies with the ISO-3322 standard. This...
COMPENSATED HYDRAULIC FLOW REGULATOR
Compensated 2-way flow regulator. Two chokes in series are present in the valve. The first corresponds to the one that is adjustable using the knob; The second, controlled by the pressure prior to and following the first throttle, guarantees a constant pressure jump between the previous phase and the phase following the adjustable throttle. Under these conditions, the preset flow value remains constant within a tolerance field of ±2% of the full scale flow for the maximum pressure variation between the inlet and outlet chambers of the valve.
- Made of steel.
- Pressure up to 300 bar.
- Flow rates up to 45 liters per minute.
- Available in 3 threads. 1/4 - 3/8 - 1/2
€46.46
(tax incl.)
€38.40
(tax excl.)
Reference:
49370001
2-way compensated flow regulator
You may also like
€0.21
(tax excl.)
€0.25
(tax incl.)
metal gasket
The Metal Buna gasket is a sealing element composed of an outer metal ring and an inner elastomer (NBR) ring. It is used to achieve a watertight seal in threaded and flanged joints. The main function of...
€10.07
(tax excl.)
€12.18
(tax incl.)
A Ø63 PRESSURE GAUGE SIDE THREAD 1/4" WITH GLYCERIN is an instrument used to measure the pressure of gases or liquids contained in a closed system in a multitude of applications (hydraulic, pneumatic, water,...
€0.55
(tax excl.)
€0.67
(tax incl.)
Male-to-male splice fitting
A male-to-male coupling is used in hydraulic systems to directly join two male pipes or hoses, allowing the flow of hydraulic fluid between them. The male threads are screwed into the...
€95.00
(tax excl.)
€114.95
(tax incl.)
The VNKP hydraulic orbital motor (OMP) is designed to convert hydraulic energy into mechanical rotational energy, i.e., high torque at low and medium speeds.
Applications: Agricultural machinery, Construction...
8 other products in the same category:
€11.18
(tax excl.)
€13.53
(tax incl.)
Hydraulic 60º cone male thread non-return valve . Q
Zinc-plated steel body, internal elements in tempered steel.
Opening pressure 1 bar. (other pressures, consult)
Oil temperature 50ºC viscosity 30 cSt
Flow rates from...
€65.00
(tax excl.)
€78.65
(tax incl.)
The manual 6-way hydraulic diverter valve is a control component in a hydraulic system that allows the operator to manually redirect the flow of a hydraulic fluid (usually oil) from one line to another or to a...
€40.00
(tax excl.)
€48.40
(tax incl.)
Push-button joystick grip. Function NO
It is commonly used in various types of heavy machinery, such as excavators, loaders and other construction equipment. Normally open function. NO
Possibility to select from 1 to...
€125.50
(tax excl.)
€151.86
(tax incl.)
In-line pressure reducing valve (sequence). A hydraulic sequence valve is a component used in hydraulic systems to control the order in which hydraulic cylinders or motors are activated. Its main function is to ensure...
€3.61
(tax excl.)
€4.37
(tax incl.)
The screw hydraulic flow regulator is a valve designed to precisely control and adjust the flow of oil in hydraulic circuits by means of an adjusting screw. Applications: Industrial hydraulic systems, Agricultural...
€67.00
(tax excl.)
€81.07
(tax incl.)
A pressure switch with a knob is a device that opens or closes an electrical circuit based on a preset pressure, adjusted by the knob. It activates automatically when the pressure reaches the preset value....
€23.80
(tax excl.)
€28.80
(tax incl.)
A one-way knob flow regulator is a valve designed to control the speed of an actuator by allowing free flow of fluid in one direction and restricting it in the opposite direction. Applications: Automation, robotics,...
€2.80
(tax excl.)
€3.39
(tax incl.)
Extended ball fitting for mounting on double piloted check valves Technical sheet: Made of carbon steel. Working temperature -40 / 150ºC. Working pressure 250 bar. Possibility of choosing various lengths and diameters...
Recently Viewed
€46.46
(tax incl.)
€38.40
(tax excl.)
Compensated 2-way flow regulator. Two chokes in series are present in the valve. The first corresponds to the one that is adjustable using the knob; The second, controlled by the pressure prior to and following the...
€15.00
(tax excl.)
€18.15
(tax incl.)
THREADED ADAPTER FOR NAMUR REGULATOR Adapter or threaded plate for mounting on flow regulators in NAMUR standard actuators 1/4" Female Thread It comes with screws and O-rings.
€11.00
(tax excl.)
€13.31
(tax incl.)
A BSP female thread IBC container adapter is used to connect a fitting or hose with a BSP male thread to the bottom outlet of an Intermediate Bulk Container (IBC). Applications: Chemical industry, Agriculture, Food...
€3.60
(tax excl.)
€4.36
(tax incl.)
A male express fitting is a type of quick and secure connection for pneumatic tubing. On one side, it has an external (male) thread that allows it to be screwed onto a component, such as a cylinder or valve; on the...
€125.50
(tax excl.)
€151.86
(tax incl.)
In-line pressure reducing valve (sequence). A hydraulic sequence valve is a component used in hydraulic systems to control the order in which hydraulic cylinders or motors are activated. Its main function is to ensure...
€14.00
(tax excl.)
€16.94
(tax incl.)
The plastic mesh water filter cartridge is used to remove sediment, dirt, and other solid particles from liquids. The mesh is wound in a spiral shape to increase the filtration surface area and dirt-holding capacity....
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
