Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
LEVER MONOBLOC DISTRIBUTOR
LEVER MONOBLOC DISTRIBUTOR
LEVER MONOBLOC DISTRIBUTOR
LEVER MONOBLOC DISTRIBUTOR
LEVER MONOBLOC DISTRIBUTOR
LEVER MONOBLOC DISTRIBUTOR
LEVER MONOBLOC DISTRIBUTOR
LEVER MONOBLOC DISTRIBUTOR
LEVER MONOBLOC DISTRIBUTOR
LEVER MONOBLOC DISTRIBUTOR

LEVER MONOBLOC DISTRIBUTOR

Monobloc distributor with spring return to center lever. Double effect.

  • Includes limiting valve.
  • The position of the lever can be vertical or horizontal.
  • Availability of 1 to 8 positions with lever, depending on thread.

Possibility to choose 3 sizes:

3/8" Flow rate 45 l/min. Max. pressure 315 bar.
1/2" Flow rate 60 l/min. Max. pressure 315 bar.
1" Flow rate 120 l/min. Pressure 210 bar.

We have multiple positioners and possible combinations. Consult

€116.84 (tax included)
€96.56 (tax excl.)
SELECT THE THREAD
  • 3/8"
  • 1/2"
  • 1"
OUTPUT TYPE
  • 1 POSITION
  • 2 POSITIONS
  • 3 POSITIONS
  • 4 POSITIONS
  • 5 POSITIONS
  • 6 POSITIONS
  • 7 POSITIONS
Reference:
49390000
Description

Monobloc distributor with spring return to center lever. Double effect.

Product Details
49390000
Comments
Related products
LEVER FOR MONOBLOC DISTRIBUTOR LEVER FOR MONOBLOC DISTRIBUTOR

€2.40 (tax excl.)
€2.90 (tax included)
The lever for a monobloc distributor is the mechanical control element that allows the operator to control the movement of the internal slide of a hydraulic valve. Applications: agricultural machinery, cranes and...
BUNA METAL GASKET BUNA METAL GASKET

€0.21 (tax excl.)
€0.25 (tax included)
metal gasket The Metal Buna gasket is a sealing element composed of an outer metal ring and an inner elastomer (NBR) ring. It is used to achieve a watertight seal in threaded and flanged joints. The main function of...
MALE-TO-MALE JOINT FITTING MALE-TO-MALE JOINT FITTING

€0.55 (tax excl.)
€0.67 (tax included)
Male-to-male splice fitting A male-to-male coupling is used in hydraulic systems to directly join two male pipes or hoses, allowing the flow of hydraulic fluid between them. The male threads are screwed into the...
VNKP HYDRAULIC ORBITAL MOTOR (OMP) VNKP HYDRAULIC ORBITAL MOTOR (OMP)

€95.00 (tax excl.)
€114.95 (tax included)
The VNKP hydraulic orbital motor (OMP) is designed to convert hydraulic energy into mechanical rotational energy, i.e., high torque at low and medium speeds. Applications: Agricultural machinery, Construction...
REINFORCED HYDRAULIC MOTOR VNKR (OMR) REINFORCED HYDRAULIC MOTOR VNKR (OMR)

€105.00 (tax excl.)
€127.05 (tax included)
The VNKR (OMR) reinforced orbital hydraulic motor is characterized by its ability to work smoothly and safely at high pressures, with high efficiency and long life. Applications: agricultural machinery, construction...
ONE-WAY KNOB FLOW REGULATOR ONE-WAY KNOB FLOW REGULATOR

€23.80 (tax excl.)
€28.80 (tax included)
A one-way knob flow regulator is a valve designed to control the speed of an actuator by allowing free flow of fluid in one direction and restricting it in the opposite direction. Applications: Automation, robotics,...
12 other products in the same category:
Extended ball fitting

€2.80 (tax excl.)
€3.39 (tax included)
Extended ball fitting for mounting on double piloted check valves Technical sheet: Made of carbon steel. Working temperature -40 / 150ºC. Working pressure 250 bar. Possibility of choosing various lengths and diameters...
2-WAY HYDRAULIC SOLENOID VALVE, NORMALLY OPEN, DOUBLE CHECK

€90.00 (tax excl.)
€108.90 (tax included)
2-WAY HYDRAULIC SOLENOID VALVE, NORMALLY OPEN, DOUBLE CHECK Maximum pressure 3/8 280 bar. Maximum pressure 1/2 250 bar Flow rate 3/8" 40 l/min Flow rate 1/2" 70 l/min Operating temperature -20/90ºC Aluminum body, NBR...
SLIDING FLOW DIVIDER

€113.56 (tax excl.)
€137.41 (tax included)
Sliding flow divider A spool flow divider is a type of hydraulic valve used to split an oil flow into two or more equal flows. The valve has a spool that moves along an orifice, dividing the oil flow into two or more...
XMLA300D2S11 Pressure Switch

€120.00 (tax excl.)
€145.20 (tax included)
XMLA300D2S11 Pressure Switch Maximum pressure 300 bar 1 scale limit NO/NC Switch IP-66 protection rating Temperature -25 / 70ºC 1/4" female thread Download technical data sheet
WIKA A-10 PRESSURE TRANSMITTER

€140.00 (tax excl.)
€169.40 (tax included)
The Wika A-10 pressure transmitter is a pressure sensor designed for general industrial applications requiring accurate, reliable, and continuous measurement. Applications: hydraulic systems, pneumatic systems, pumps,...
SINGLE PILOT CHECK VALVE

€28.70 (tax excl.)
€34.73 (tax included)
Single pilot check valve. It is used in hydraulic systems to allow fluid flow in one direction and prevent backflow. An auxiliary pressure valve controls the opening and closing of the main valve. Technical sheet:...
2-WAY HYDRAULIC SOLENOID VALVE, NORMALLY CLOSED, DOUBLE CHECK

€85.00 (tax excl.)
€102.85 (tax included)
2-WAY HYDRAULIC SOLENOID VALVE, NORMALLY CLOSED, DOUBLE CHECK Maximum pressure 280 bar. Flow rate 3/8" 30 l/min Flow rate 1/2" 70 l/min Operating temperature -20/90ºC Aluminum body, NBR gaskets Alternating current...
DOUBLE PILOT CHECK VALVE

€20.93 (tax excl.)
€25.33 (tax included)
Double pilot check valve. It allows fluid flow in one direction and blocks it in the opposite direction. It differs from a simple check valve in that its operation is controlled by two hydraulic pilots, providing...
SCREW-TYPE HYDRAULIC FLOW REGULATOR

€3.61 (tax excl.)
€4.37 (tax included)
The screw hydraulic flow regulator is a valve designed to precisely control and adjust the flow of oil in hydraulic circuits by means of an adjusting screw. Applications: Industrial hydraulic systems, Agricultural...
DOUBLE TUBE PILOTED NON-RETURN VALVE 12

€19.00 (tax excl.)
€22.99 (tax included)
Double pilot check valve for Ø12 tube Made of steel. Conical seat. Working pressure, between 300 and 350 bar. Max temperature 80ºC
ONE-WAY PINEAPPLE FLOW REGULATOR

€18.31 (tax excl.)
€22.16 (tax included)
The one-way pineapple flow regulator is designed to regulate the forward or reverse speed of hydraulic cylinders, controlling the oil flow in a single direction of circulation and allowing free passage in the opposite...
BIDIRECTIONAL PINEAPPLE FLOW REGULATOR

€16.49 (tax excl.)
€19.95 (tax included)
Bidirectional pineapple bidirectional regulator . To regulate the speed of hydraulic cylinders. Made of steel. Fixing locknut. Temperature -20ºC / 80ºC Flow rates from 15 to 80 liters per minute. Maximum pressure 350...
Recently Viewed
LEVER MONOBLOC DISTRIBUTOR

€116.84 (tax included)
€96.56 (tax excl.)
Monobloc distributor with spring return to center lever. Double effect. Includes limiting valve. The position of the lever can be vertical or horizontal. Availability of 1 to 8 positions with lever, depending on...
CAP SCH-40 A-316L

€3.10 (tax excl.)
€3.75 (tax included)
A SCH-40 A-316L CAP is a pipe fitting used to close or plug the end of a pipe that meets the Schedule 40 (SCH 40) wall thickness standard and is made of stainless steel. It is suitable for demanding applications in...
MANOMETER Ø50 CENTRAL THREAD 1/8"

€6.05 (tax excl.)
€7.32 (tax included)
Pressure gauge Ø50 center thread 1/8" A Ø50 pressure gauge with a 1/8" central thread is a measuring instrument used to indicate the pressure of fluids (air, water, oil or other compatible fluids) by means of an...
STRAIGHT GRINDER 4502

€45.82 (tax excl.)
€55.44 (tax included)
A 4502 straight grinder is a portable tool for cutting, grinding, and sharpening hard materials such as metal, ceramic, and plastic. It features a rotation axis perpendicular to the tool body. Speed: 20,000 rpm It is...
90º SCH-40 A-316L ELBOW

€3.58 (tax excl.)
€4.33 (tax included)
A 90º SCH-40 A-316L elbow is an industrial pipe fitting, designed to change the direction of fluid flow at a 90º angle. Applications: Petrochemical and Refineries, Pharmaceutical and Biotechnology Industry, Food and...
FLUSH PUSHBUTTON RM 010

€13.00 (tax excl.)
€15.73 (tax included)
The RM 010 flush-mounted push button is used to control fluid flow in a pipe. It has a flush button that is pressed to open the valve and allow fluid flow; when the button is released, the valve closes and the fluid...

Menu

Please sign in first.

Sign in