€1.14
(tax excl.)
€1.38
(tax incl.)
Male fitting.
Nickel-plated brass fitting.
Nominal pressure 10 bar
Max. temperature 90ºC
HYDROTUBE HOSE (50 m)
The Hidrotubo hose (50 mt) is a pipe specially designed for industrial and sanitary use, characterized by a smooth inner and outer surface, which gives it great flexibility and lightness.
Applications: For industrial, sanitary and special use for swimming pools.
Main features :
- Flexible PVC pipe reinforced with rigid anti-shock PVC spiral.
- Gray.
- Completely smooth interior and exterior surface.
- Airtight and resistant bonding at the joint at 30 bar pressure.
- High resistance to wastewater and chlorinated pool circuit water.
- It withstands temperatures between -10 °C / +60 °C.
- Manufactured according to UNE EN ISO 3994 standard.
- Pipe with product certificate MARCA N AENOR complying with the UNE EN ISO 3994 standard, category T2.
It is supplied only in 50m rolls. The price is for one 50m roll.
€0.91
(tax incl.)
€0.75
(tax excl.)
Reference:
100013
Hydrotube Hose (50 m)
The Hidrotubo hose is a pipe for industrial and sanitary use, especially suitable for swimming pools . It features a smooth inner and outer surface, which provides great flexibility and lightness , facilitating handling and installation. Its precise outer diameters allow for easy and secure assembly with adhesive-backed PVC fittings, PVC fittings with elastic gaskets, and polypropylene (PP) fittings, guaranteeing a watertight and highly resistant seal capable of withstanding pressures up to 30 bar at the joint. It offers excellent chemical resistance, according to the PVC resistance chart, as well as high durability against wastewater and chlorinated pool water, operating reliably in a temperature range of -10°C to 60°C . Furthermore, it is a certified pipe with the AENOR N Mark, complying with the UNE EN ISO 3994 standard, category T2.
Applications
- Evacuations
- Water and sanitary pipes
- Purification circuits for swimming pools, whirlpool baths, drains.
- Condensation and air conditioning installations.
Hydrotube hose technical data sheet:
| Code | Inner diameter (mm) | Outer diameter (mm) | Weight (g/m) | Operating pressure (bar) | Minimum burst pressure (bar) | Radius of curvature (mm) | Vacuum mH2O |
| 100013 | 13 | 16 | 100 | 7 | 22 | 39 | 9 |
| 100016 | 16 | 20 | 155 | 7 | 22 | 48 | 9 |
| 100020 | 20 | 25 | 240 | 7 | 22 | 60 | 9 |
| 100026 | 26 | 32 | 370 | 5 | 15 | 78 | 9 |
| 100027 | 27 | 32 | 334 | 5 | 15 | 81 | 9 |
| 100034 | 34 | 40 | 480 | 5 | 15 | 102 | 9 |
| 100035 | 35 | 40 | 400 | 5 | 15 | 105 | 9 |
| 100043 | 43 | 50 | 685 | 5 | 15 | 129 | 9 |
| 100055 | 55 | 63 | 1000 | 5 | 15 | 165 | 9 |
| 100065 | 65 | 75 | 1400 | 4 | 12 | 195 | 9 |
| 100080 | 80 | 90 | 1800 | 4 | 12 | 240 | 9 |
| 1000100 | 100 | 110 | 2200 | 3 | 9 | 300 | 9 |
8 other products in the same category:
€0.38
(tax excl.)
€0.46
(tax incl.)
The W2 endless clamp is ideal for automotive and industrial applications. It is used to secure and seal hoses and pipes.
Applications: Cooling and heating systems, Fuel and air systems in automobiles, Industrial and...
€2.81
(tax excl.)
€3.40
(tax incl.)
A soldering pin It is used to permanently join a flexible hose to a piping system or other rigid component using a welding process. The barbed end is inserted into the flexible hose with a firm grip, while the solder...
€5.03
(tax excl.)
€6.09
(tax incl.)
A double barb fitting is a connector with two identical barbed ends used to securely join two hoses. To ensure a tight and pressure-resistant connection, it must always be supplemented with hose clamps. Applications:...
€12.36
(tax excl.)
€14.95
(tax incl.)
The W2 double bridge clamp is a fastening element designed to securely hold hoses, pipes and conduits in industrial installations.
Applications: Air conditioning, ventilation and extraction systems.
Main features:
430...
€1.14
(tax excl.)
€1.38
(tax incl.)
Swivel female fitting for sanitary stainless steel hoses used in all bathrooms, heaters and sanitary water systems
Swivel female fitting.
Nickel-plated brass fitting.
Flat EPDM rubber gasket.
Nominal Pressure 10 bar...
€7.72
(tax excl.)
€9.34
(tax incl.)
A hose barb is used to connect a flexible hose to a threaded component, such as a pipe, valve, pump, or other equipment.
Common applications: Irrigation and gardening systems, Compressed air systems, Water supply...
€1.00
(tax excl.)
€1.21
(tax incl.)
Bell to press sanitary hoses. .
Made of 304 INOX steel
Nominal pressure 10 bar
Max. temperature 90ºC
Recently Viewed
€0.91
(tax incl.)
€0.75
(tax excl.)
The Hidrotubo hose (50 mt) is a pipe specially designed for industrial and sanitary use, characterized by a smooth inner and outer surface, which gives it great flexibility and lightness. Applications: For industrial,...
€13.60
(tax excl.)
€16.46
(tax incl.)
Straight link is used to join two segments of Loc-Line hose of the same diameter in a straight line, thus extending the overall length of the hose or connecting different sections of the hose. Examples of use:...
€354.00
(tax excl.)
€428.34
(tax incl.)
Hydac membrane accumulator to achieve energy storage. Technical information: Volume 2.8 liters. Membrane made of NBR. Equipped with a lockable safety block and complies with the pressure equipment regulations and...
€16.91
(tax excl.)
€20.46
(tax incl.)
A 1/2" flat outlet nozzle is a terminal fitting for the Loc-Line modular hose system. The nozzle's end opening is rectangular or elongated.
Applications: linear cooling of components, chip blowing over extended areas,...
€1.00
(tax excl.)
€1.21
(tax incl.)
A DIN-43650-B T-22 coil connector is an industrial electrical connector, primarily designed to securely and reliably connect a power or control source to a coil of an electromechanical device. The T-22 designation...
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
