Click for more products.
No produts were found.
Click for more products.
No produts were found.

T-22 COIL CONNECTOR DIN-43650-B

  • Contacts: Nut with protection for conductors.
  • Number of poles: 2 + Earth.
  • Contact distance: 11 mm.
  • Cable entry: PG7 – PG9.
  • Lining: NBR profile (Different, upon request).
  • Fixing nut: M3 x 32.
  • Standard ground position: H 12 (Opposite the cable exit).
  • Protection degree: IP 65 (Connected).
  • Max section of conductors: 1.5 mm²

Buy online T-22 COIL CONNECTOR DIN-43650-B at the best price

€1.21 (tax incl.)
€1.00 (tax excl.)
Reference:
6003
Consult price for large quantities
Description

CONECTOR BOBINA T-22 DIN-43650-B

Product Details
6003
12 other products in the same category:
€45.79 (tax incl.)
€37.84 (tax excl.)
Programmable T-22 analog timer for joint use with elements that have a DIN 43650 B type connection. This type of device is applied with solenoid valves for the drainage of compressor tanks such as air transport lines,...
€10.65 (tax incl.)
€8.80 (tax excl.)
Standard insulation: class “F” according to VDE 0580-0110 standard and CEI standard. Insulation on request: Class “H”. Maximum temperature: 180ºC. Construction: Fully encapsulated in 6/6 resin/nylon with fiberglass....
€5.01 (tax incl.)
€4.14 (tax excl.)
Contacts: Nut with protection for conductors. Number of poles: 2/3 + Earth. Contact distance: 9.4 mm. Cable entry: PG7. Lining: NBR profile (Different, upon request). Fixing nut: M2.5 x 28. Standard ground position: H...
€1.21 (tax incl.)
€1.00 (tax excl.)
Contacts: Nut with protection for conductors. Number of poles: 2 + Earth. Contact distance: 18 mm. Cable entry: PG7 – PG9. Lining: NBR profile (Different, upon request). Fixing nut: M3 x 32. Standard ground position:...
€45.79 (tax incl.)
€37.84 (tax excl.)
Valve connection: DIN 43650 ISO-4400/6952. ON setting time: 1 - 30 sec. OFF setting time: 1.5 - 45 min. Supply voltage: 24-240 Vac 50/60 Hz 24 – 240 Vdc. I switching: 1A. I consumption: 4 mA. Operating temperature:...
€14.52 (tax incl.)
€12.00 (tax excl.)
Rectifier connector T:30 DIN-43650 form A. Transforms alternating current to direct current Contacts: Nut with protection for conductors. Number of poles: 2 + Earth Possibility of supplying with LED Contact distance:...
€1.21 (tax incl.)
€1.00 (tax excl.)
Contacts: Nut with protection for conductors. Number of poles: 2/3 + Earth. Contact distance: 9.4 mm. Cable entry: PG7. Lining: NBR profile (Different, upon request). Fixing nut: M2.5 x 28. Standard ground position: H...
€15.55 (tax incl.)
€12.85 (tax excl.)
Coil for solenoid valve. Inner Ø 13 mm. Power in DC 27 W. Max. temperature 180ºC. Class H insulation Connector type DIN-4365A Possibility of ordering Voltage at 72 V DC (railways)
€47.19 (tax incl.)
€39.00 (tax excl.)
Purge valve programmable in time and period, using an electronic timer for condensate discharge. It works automatically and wastes less air when unloading. Adapts to any type of compressor. Automatic air purge. DN-15...
€1.31 (tax incl.)
€1.08 (tax excl.)
3 pin + ground connection Conductive cable max. 0.75 mm² DIN C
DIN-43650-A connector with LED Contacts: Nut with protection for conductors. LED + Varistor Circuit Number of poles: 2 + Earth. Contact distance: 11 mm. Cable entry: PG7 – PG9. Lining: NBR profile (Different, upon...
€5.01 (tax incl.)
€4.14 (tax excl.)
Contacts: Nut with protection for conductors. LED + Varistor Circuit Number of poles: 2 + Earth. Contact distance: 11 mm. Cable entry: PG7 – PG9. Lining: NBR profile (Different, upon request). Fixing nut: M3 x 32....

Menu