Click for more products.
No produts were found.
Click for more products.
No produts were found.

C3 8W SOLENOID VALVE COIL

A C3 8W solenoid coil is the essential electromagnetic component that activates a solenoid valve mechanism, allowing or stopping the flow of fluid (liquid or gas) in a system. 8W indicates the power consumption.

Applications: Industrial automation, Machinery, Hydraulic systems, Automated irrigation systems.

Technical sheet:

  • Standard insulation: class “F” according to VDE 0580-0110 and IEC standards.
  • Insulation on request: Class “H”.
  • Maximum temperature: 180ºC.
  • Construction: Fully encapsulated in resin/nylon 6/6 with fiberglass.
  • Design: Conceived for continuous service and permanent connection (100% ED).
  • Standard voltages:
  • (~) AC: (24-110-230) V (50/60) Hz
  • (=) DC (12-24) V
  • In the case of 60 Hz frequency, consult the technical department for details.
  • Voltage tolerance:
  • (~) AC (+10 %-15% ).
  • (=) DC (+-10%).
  • Electromagnetic group:
  • Complies with EEC standard 89/336.
  • Complies with EEC standard 93/68.
  • Protection: IP65 with DIN 43650 connector.
€10.65 (tax included)
€8.80 (tax excl.)
POWER
  • 12V DC
  • 24VAC
  • 24V DC
  • 48V AC
  • 110V AC
  • 220VAC
  • 380VAC
Reference:
60100001
Description

solenoid valve coil C3 8W

BOBINA ELECTROVALVULA C3 8W

Product Details
60100001
Comments
12 other products in the same category:
€1.00 (tax excl.)
€1.21 (tax included)
A T-22 DIN-43650-B coil connector is an industrial electrical connector primarily designed to safely and reliably connect a power or control source to a coil of an electromechanical device. The T-22 designation refers...
€37.84 (tax excl.)
€45.79 (tax included)
The T-30 analog timer is an electromechanical device used to activate or deactivate an electrical circuit after a preset time. Like the T-22 DIN 43650-B, but with some differences, it is used to control processes that...
€12.00 (tax excl.)
€14.52 (tax included)
DIN-43650-A rectifier connector A DIN-43650-A rectifier connector is an electrical device used for connecting solenoid valve coils and other industrial actuators, which integrates a rectifier to convert alternating...
€12.85 (tax excl.)
€15.55 (tax included)
A C4 solenoid valve coil is used to actuate directional valves in pneumatic and hydraulic systems. Applications: Automation machinery, Process control systems, HVAC and Refrigeration, Mobile equipment, Automated...
€5.60 (tax excl.)
€6.78 (tax included)
The T22 coil is installed in 1/4" and 1/2" solenoid valves. It is a fundamental component in the operation of a solenoid valve. It is responsible for transforming electrical energy into magnetic energy, generating a...
€37.84 (tax excl.)
€45.79 (tax included)
The T-22 DIN 43650-B analog timer is a programmable device for joint use with elements that have a DIN 43650 B type connection. It is applied with solenoid valves for draining compressor boilers such as air transport...
€1.00 (tax excl.)
€1.21 (tax included)
A T-30 DIN-43650-A coil connector is an industrial electrical connector designed to establish a safe and reliable connection between a power or control source and the coil of an electromechanical device. The T-30...
€47.00 (tax excl.)
€56.87 (tax included)
The T-30 electronic timer is a programmable device for use with elements that have a DIN 43650 A or B connection. It features a manual or "test" button, as well as selectors for setting the desired on or off time. It...
€7.51 (tax excl.)
€9.09 (tax included)
A solenoid valve coil C1 is a fundamental electromechanical component in pneumatic and hydraulic systems. It enables the flow of a fluid (air, oil, water, etc.) to be activated or deactivated through a valve,...
€6.00 (tax excl.)
€7.26 (tax included)
The DIN-43650-A LED T-30 Connector is an electrical component designed for the fast and safe connection of cables in industrial and commercial applications. Applications: Machine control systems, outdoor lighting,...
€4.14 (tax excl.)
€5.01 (tax included)
A T-22 AC/DC LED Connector is used to connect and power LED circuits. It is compatible with both alternating and direct current. It is used in a wide variety of applications including industrial lighting, signage,...
€1.00 (tax excl.)
€1.21 (tax included)
A T-15 DIN-43650-C coil connector is used to connect the power supply to the coil of a solenoid valve, allowing its activation and control. Applications: Industrial automation, Packaging, Material handling and Medical...
Recently Viewed
€10.65 (tax included)
€8.80 (tax excl.)
A C3 8W solenoid coil is the essential electromagnetic component that activates a solenoid valve mechanism, allowing or stopping the flow of fluid (liquid or gas) in a system. 8W indicates the power consumption....
€0.55 (tax excl.)
€0.67 (tax included)
Male-to-male splice fitting A male-to-male coupling is used in hydraulic systems to directly join two male pipes or hoses, allowing the flow of hydraulic fluid between them. The male threads are screwed into the...
€23.10 (tax excl.)
€27.95 (tax included)
The direct-action, flat-seat, spring- loaded safety valve is a device that relieves pressure in a system when it reaches a preset level. When the system pressure exceeds the valve's set pressure, the ball lifts off...
€8.42 (tax excl.)
€10.19 (tax included)
Reduced straight union for installations This is a plumbing and piping system accessory designed to connect two sections of pipe with different diameters. Its function is to join these two sections in a secure and...

Menu