€36.06
(tax incl.)
€29.80
(tax excl.)
Axle to place toothed wheel.
Straight entrance.
12 other products in the same category:
€22.39
(tax incl.)
€18.50
(tax excl.)
Short Lubricationbrush Ø25
Bristle length 15 mm.
Synthetic polyamide bristles.
Inlet thread 1/4" female
€57.60
(tax incl.)
€47.60
(tax excl.)
Lubrication sprocket.
Made of polyurethane foam (open cell)
Temperature -30ºC / 150ºC
Max surface speed 5 m/s.
Density 240 kg/m³
Suitable for Lubricationand oil.
To select the module, take the measurement as a...
€27.10
(tax incl.)
€22.40
(tax excl.)
Flat Lubricationbrush, side entry.
Synthetic bristles.
For oil lubrication.
Available in 3 sizes 40, 70 and 100 mm wide.
Inlet thread 1/4" female
€61.83
(tax incl.)
€51.10
(tax excl.)
VG-68 viscosity oil cartridge
MINERAL base oil.
Pressure 70 bar
Temperature -10º / 90ºC.
Volume 400 cm³
For NLGI class 2 oils and greases
Minimum distribution volume 0.15 cm³
Volume per cycle 0.15 - 4.5 cm³
CHECK THE...
€55.78
(tax incl.)
€46.10
(tax excl.)
Universal LUB-KA01 Li/Ca Lubricationcartridge based on mineral oil. For general lubrication.
Pressure 70 bar
Temperature -30º / 120ºC.
Volume 400 cm³
For NLGI class 2 oils and greases
Minimum distribution volume 0.15...
€73.08
(tax incl.)
€60.40
(tax excl.)
PAO based PHS high temperature Lubricationcartridge
Pressure 70 bar
Temperature -40º / 160ºC.
Volume 400 cm³
For NLGI class 2 oils and greases
Minimum distribution volume 0.15 cm³
Volume per cycle 0.15 - 4.5 cm³...
€37.15
(tax incl.)
€30.70
(tax excl.)
Connection cable for Lubricus LUB-C A CONTROLLERThread M-12 x 1, Thread M-8 x 1
4-pole, A-coded.
Possibility between 5 mt. and 10 mt.
Polyurethane Cable.
Resistant to oils and coolants.
Protection IP-67, IP-68, IP-69K
€26.74
(tax incl.)
€22.10
(tax excl.)
Fixing bracket for progressive distributors in LUB SV
Made of stainless steel
Supplied with nut and fixing screws.
€62.92
(tax incl.)
€52.00
(tax excl.)
LUB Ka70 Food Oil Cartridge for Lubricus
Food oil cartridge NSF-H1 No 127130
Synthetic base oil.
Pressure 70 bar
Temperature -30º / 100ºC.
Volume 400 cm³
For NLGI class 2 oils and greases
Minimum distribution volume...
€104.42
(tax incl.)
€86.30
(tax excl.)
Open cell PU foam rollers punctually transfer lubricant to the surface of the roller chain flanges. The mechanical driving force of the rollers is guaranteed by a low-wear plastic sprocket. Chain lubrication sprockets...
€143.39
(tax incl.)
€118.50
(tax excl.)
Double chain lubricator sprocket.
Open cell PU foam rollers punctually transfer lubricant to the surface of the roller chain flanges. The mechanical driving force of the rollers is guaranteed by a low-wear plastic...
