Click for more products.
No products were found.

STAINLESS STEEL SAMPLING VALVE

A stainless steel sampling valve is used to extract small quantities of fluid from an industrial process or piping system, in order to perform analysis or quality control.

Common applications: Food and beverage industry, Pharmaceutical and cosmetic industry, Chemical and petrochemical industry, or Water treatment.

Technical specifications:

  • Butterfly screw operation.
  • Constructed of I-316. PN-16 Teflon gasket.
  • Maximum temperature 100ºC.
  • 1/2" male thread.
  • Polished finish.
Read moreShow less
€22.89 (tax incl.)
€18.92 (tax excl.)
Reference:
2529
Description

Stainless steel sampling valve

The stainless steel sampling valve is designed to perform sampling operations in process installations, allowing a small amount of product to be extracted for subsequent analysis or control.

Applications

This valve is suitable for installations where it is necessary to extract fluid samples from the process to perform controls, analyses or product verifications.

It can be used especially in:

  • Food industry.
  • Beverage industry.
  • Pharmaceutical industry.
  • Cosmetics industry.
  • Industrial processes.
  • Fluid handling and transfer facilities.

Technical data sheet for a stainless steel sampling valve

VALVULA TOMA MUESTRA INOX

Read moreShow less
Product Details
2529
Comments (0)
8 other products in the same category:
€25.00 (tax excl.)
€30.25 (tax incl.)
Single contact 1/8" This is a small, specialized electrical connector for quickly and securely connecting cables or conductors with a diameter of 1/8 inch. Its compact design allows it to be used in tight spaces. It...
€1.68 (tax excl.)
€2.03 (tax incl.)
Manual purge. It is used to remove air, condensate or non-condensable gases from a system periodically and manually. It is essential in a wide variety of systems, from heating and cooling installations to industrial...
€70.61 (tax excl.)
€85.44 (tax incl.)
A 1/2" 90º lever valve is a pneumatic component designed to control the flow of compressed air manually. Applications: Industrial automation, Medical equipment, Robotics and Instrumentation Technical data sheet:...
€6.56 (tax excl.)
€7.94 (tax incl.)
The PN-25 brass ball valve with bleed valve incorporates a purge system that allows the fluid contained in the valve or pipe to drain. This facilitates maintenance, cleaning, and freeze prevention. Common...
€8.36 (tax excl.)
€10.12 (tax incl.)
Unidirectional flow regulator adjustable 360º It is a pneumatic article that allows the control and adjustment of the flow of a fluid in a pipe and in a single direction, with the particularity that its outlet can be...
€12.36 (tax excl.)
€14.96 (tax incl.)
A male-female stainless steel mini ball valve is used to control fluid flow in hydraulic, pneumatic, and general piping systems. The shutoff element is a ball that rotates within a seat to open or close the flow of...
€5.50 (tax excl.)
€6.66 (tax incl.)
A 1/8" adjustable 13-18 bar safety valve without set point automatically releases the pressure of a system when it exceeds a preset and adjustable value between 13 and 18 bar. Applications: Pneumatic systems,...
€8.85 (tax excl.)
€10.71 (tax incl.)
A female slide valve is characterized by an internal sliding element (the slide) that moves to open or close orifices, thus directing or blocking the flow of fluid between its different ports. Applications: Cylinders...
Recently Viewed
€22.89 (tax incl.)
€18.92 (tax excl.)
A stainless steel sampling valve is used to extract small quantities of fluid from an industrial process or piping system, in order to perform analysis or quality control. Common applications: Food and beverage...
€121.55 (tax excl.)
€147.08 (tax incl.)
The AB-112F2 1/2" impact wrench is a pneumatic tool designed to quickly and efficiently loosen and tighten nuts and bolts. Applications: mechanical workshops, industry, construction. Technical specifications: Air...

Menu

Settings