Click for more products.
No products were found.

ELECTRICAL DISTRIBUTOR NAMUR CONNECTION

A NAMUR electrical connection distributor is used to connect and disconnect a pneumatic actuator to an electrical power source.

It is used in a wide range of applications such as industrial machines, transportation equipment and automation equipment.

Technical data sheet:

  • Materials: Pilot in brass and stainless steel, operator, base and piston in POM,
  • Aluminum alloy body, aluminum slide, stainless steel spring, brass bushings and NBR seals.
  • Ø Pitch: 6.7 mm
  • Flow rate: 2100 l/min (6 bar)
  • Pressure: 2 ÷ 10 bar
  • Temperature: -5º ÷ +50º C
  • Threads: NAMUR 1/4
  • Fluids: Filtered air with or without lubrication.
  • Coil: SP22 (NOT INCLUDED)
  • Available voltage 12 VDC, 24 VDC, 24 VAC, 110 VAC, 220 VAC
  • Power: 3 W (DC), 5 VA (AC)
  • Protection class: IP65 (with connector)
  • Cable passage: PG9
Read moreShow less
€47.35 (tax incl.)
€39.13 (tax excl.)
SELECT TYPE
  • 3/2 MONOSTABLE
  • 5/2 MONOSTABLE
  • 5/2 BISTABLE
  • 5/3 CLOSED DOCK CENTER
  • 5/3 CENTER TO DOCK EXHAUST
  • 5/3 SPRING PRESSURE CENTER
Reference:
21440008
Description

electrical distributor NAMUR connection

DISTRIBUIDOR CONEXION NAMURDISTRIBUIDOR CONEXION NAMUR

Read moreShow less
Product Details
21440008
Comments (0)
You may also like
€1.23 (tax excl.)
€1.49 (tax incl.)
An instant straight union fitting for cylindrical threaded tubes is a component used to connect two tubes quickly and easily, without the need for special tools. Applications: irrigation systems, compressed air...
€1.00 (tax excl.)
€1.21 (tax incl.)
A DIN-43650-B T-22 coil connector is an industrial electrical connector, primarily designed to securely and reliably connect a power or control source to a coil of an electromechanical device. The T-22 designation...
€5.60 (tax excl.)
€6.78 (tax incl.)
The T22 coil is installed in 1/4" and 1/2" solenoid valves. It is a fundamental component in the operation of a solenoid valve. It is responsible for transforming electrical energy into magnetic energy, generating a...
€1.51 (tax excl.)
€1.83 (tax incl.)
A quick-connect fitting with a cylindrical threaded elbow joint is a connection component used primarily in pneumatic and low-pressure fluid systems. It allows for the quick and easy connection of a flexible or...
€4.14 (tax excl.)
€5.01 (tax incl.)
A T-22 AC/DC LED Connector is used to connect and power LED circuits. It is compatible with both alternating and direct current. It is used in a wide variety of applications including industrial lighting, signage,...
8 other products in the same category:
€18.20 (tax excl.)
€22.02 (tax incl.)
A 1/2" valve base plate serves as a platform for neatly and securely mounting and connecting various 1/2" valves, such as distributors, regulators and filters. Applications: Industrial automation, Packaging, Materials...
€1.00 (tax excl.)
€1.21 (tax incl.)
A DIN-43650-B T-22 coil connector is an industrial electrical connector, primarily designed to securely and reliably connect a power or control source to a coil of an electromechanical device. The T-22 designation...
€7.51 (tax excl.)
€9.09 (tax incl.)
A solenoid valve coil C1 is a fundamental electromechanical component in pneumatic and hydraulic systems. It enables the flow of a fluid (air, oil, water, etc.) to be activated or deactivated through a valve,...
€58.10 (tax excl.)
€70.30 (tax incl.)
A 1/2" electropneumatic distributor controls the flow of compressed air precisely using an electrical signal. Applications: Industrial automation, Packaging, Material handling and Medical equipment Technical data...
€29.00 (tax excl.)
€35.09 (tax incl.)
A 1/8" electropneumatic distributor controls the flow of compressed air precisely using an electrical signal. The connection diameter is 1/8", making it ideal for lower flow applications. Applications: Industrial...
€5.60 (tax excl.)
€6.78 (tax incl.)
The T22 coil is installed in 1/4" and 1/2" solenoid valves. It is a fundamental component in the operation of a solenoid valve. It is responsible for transforming electrical energy into magnetic energy, generating a...
€1.00 (tax excl.)
€1.21 (tax incl.)
A DIN-43650-C T-15 coil connector is used to connect the power supply to the coil of a solenoid valve, allowing its activation and control. Applications: Industrial automation, Packaging, Material processing and...
€4.14 (tax excl.)
€5.01 (tax incl.)
A DIN-43650-C T-15 LED Connector establishes a safe and reliable connection between a power or control source and a coil of an electromechanical device, such as a solenoid valve. It incorporates an indicator LED that...
Recently Viewed
€47.35 (tax incl.)
€39.13 (tax excl.)
A NAMUR electrical connection distributor is used to connect and disconnect a pneumatic actuator to an electrical power source. It is used in a wide range of applications such as industrial machines, transportation...
€2.00 (tax excl.)
€2.42 (tax incl.)
Base blanking plate is used to close and seal openings in bases or structures such as electrical boxes, control panels, electronic equipment or machinery. Its primary function is to protect internal components from...
€25.02 (tax excl.)
€30.27 (tax incl.)
Modular pressure regulator A modular pressure regulator is a pneumatic device designed to reduce, regulate, and maintain a constant fluid pressure, regardless of variations in inlet pressure. Its modular design...

Menu

Settings