Click for more products.
No produts were found.
Click for more products.
No produts were found.

1/2" ELECTRO-PNEUMATIC DISTRIBUTOR

A 1/2" electropneumatic distributor controls the flow of compressed air precisely using an electrical signal.

Applications: Industrial automation, Packaging, Material handling and Medical equipment

Technical data sheet:

  • Aluminum alloy body, aluminum slide,
  • Stainless steel spring, brass bushings and NBR seals.
  • Ø Pitch: 8 mm
  • Flow rate: 3150 nl/min (6 bar)
  • Pressure: 1 ÷ 10 bar
  • Temperature: -5º / +50º C
  • Fluids: Filtered air with or without lubrication.
  • Coil: T22
  • Protection class: IP65
€70.30 (tax included)
€58.10 (tax excl.)
SELECT TYPE
  • 3/2 N..OPEN
  • 3/2 N.. CLOSED
  • 3/2 FLIP-UP
  • 5/2 MONOSTABLE
  • 5/2 BISTABLE
  • 5/3 CLOSED DOCK CENTER
  • 5/3 CENTER TO DOCK EXHAUST
  • 5/3 SPRING PRESSURE CENTER
Reference:
21390001
Description

Electropneumatic distributor 1/2"

Product Details
21390001
Comments
Related products
€1.23 (tax excl.)
€1.49 (tax included)
An instant straight union fitting for cylindrical threaded tubes is a component used to connect two tubes quickly and easily, without the need for special tools. Applications: irrigation systems, compressed air...
€1.00 (tax excl.)
€1.21 (tax included)
A T-22 DIN-43650-B coil connector is an industrial electrical connector primarily designed to safely and reliably connect a power or control source to a coil of an electromechanical device. The T-22 designation refers...
€2.23 (tax excl.)
€2.70 (tax included)
A regulated silencer is used in compressed air systems to reduce the noise level generated by escaping air from valves, cylinders, or any other pneumatic equipment. It allows for controlling the exhaust air flow rate...
€5.60 (tax excl.)
€6.78 (tax included)
The T22 coil is installed in 1/4" and 1/2" solenoid valves. It is a fundamental component in the operation of a solenoid valve. It is responsible for transforming electrical energy into magnetic energy, generating a...
€18.20 (tax excl.)
€22.02 (tax included)
A 1/2" valve base plate serves as a platform for neatly and securely mounting and connecting various 1/2" valves, such as distributors, regulators and filters. Applications: Industrial automation, Packaging, Materials...
12 other products in the same category:
€29.00 (tax excl.)
€35.09 (tax included)
A 1/8" electropneumatic distributor controls the flow of compressed air precisely using an electrical signal. The connection diameter is 1/8", making it ideal for lower flow applications. Applications: Industrial...
€5.60 (tax excl.)
€6.78 (tax included)
The T22 coil is installed in 1/4" and 1/2" solenoid valves. It is a fundamental component in the operation of a solenoid valve. It is responsible for transforming electrical energy into magnetic energy, generating a...
€4.50 (tax excl.)
€5.45 (tax included)
A T-15 Coil for 1/8" solenoid valves is essential in the operation of a 1/8" pneumatic solenoid valve. Its main function is to transform electrical energy into mechanical energy. Applications: Industrial automation,...
€1.00 (tax excl.)
€1.21 (tax included)
A T-15 DIN-43650-C coil connector is used to connect the power supply to the coil of a solenoid valve, allowing its activation and control. Applications: Industrial automation, Packaging, Material handling and Medical...
€7.51 (tax excl.)
€9.09 (tax included)
A solenoid valve coil C1 is a fundamental electromechanical component in pneumatic and hydraulic systems. It enables the flow of a fluid (air, oil, water, etc.) to be activated or deactivated through a valve,...
€11.20 (tax excl.)
€13.55 (tax included)
A 1/8" - 1/4" valve base plate is essential for pneumatic systems. It serves as a platform for neatly and securely mounting and connecting various valves, such as manifolds, regulators, and filters. It is often used...
€29.73 (tax excl.)
€35.97 (tax included)
1/4 electropneumatic distributor to achieve movements in the pneumatic cylinders. Materials: Pilot in brass and stainless steel Aluminum slide, stainless steel spring, Brass bushings and NBR joints. Ø Step: 8 mm Flow...
€2.00 (tax excl.)
€2.42 (tax included)
Base blanking plate is used to close and seal openings in bases or structures such as electrical boxes, control panels, electronic equipment or machinery. Its primary function is to protect internal components from...
€39.13 (tax excl.)
€47.35 (tax included)
A NAMUR electrical connection distributor is used to connect and disconnect a pneumatic actuator to an electrical power source. It is used in a wide range of applications such as industrial machines, transportation...
€1.00 (tax excl.)
€1.21 (tax included)
A T-22 DIN-43650-B coil connector is an industrial electrical connector primarily designed to safely and reliably connect a power or control source to a coil of an electromechanical device. The T-22 designation refers...
€18.20 (tax excl.)
€22.02 (tax included)
A 1/2" valve base plate serves as a platform for neatly and securely mounting and connecting various 1/2" valves, such as distributors, regulators and filters. Applications: Industrial automation, Packaging, Materials...
€4.14 (tax excl.)
€5.01 (tax included)
A T-22 AC/DC LED Connector is used to connect and power LED circuits. It is compatible with both alternating and direct current. It is used in a wide variety of applications including industrial lighting, signage,...
Recently Viewed
€70.30 (tax included)
€58.10 (tax excl.)
A 1/2" electropneumatic distributor controls the flow of compressed air precisely using an electrical signal. Applications: Industrial automation, Packaging, Material handling and Medical equipment Technical data...

Menu