Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
REDUCED TEA PRESS INOX
REDUCED TEA PRESS INOX
REDUCED TEA PRESS INOX
REDUCED TEA PRESS INOX

REDUCED TEA PRESS INOX

A stainless steel press reducing tee is used in piping systems that require high corrosion resistance and secure joints, especially in sanitary and industrial applications.

Applications: Food industry, Pharmaceutical and cosmetic industry, Chemical industry, Drinking water systems and water treatment

Technical sheet:

  • INOX-316 fitting for pressing.
  • Available tube diameters 15-18-22-28-35-42-54
  • EPDM gasket available (domestic water, heating, fire protection, compressed air (oil-free)
  • VITON seal available (oils, hydrocarbons (except diesel), solar installations, compressed air.
  • For DVGW GW 541 UNE-EN-10088 tube
  • Pressure 16 bar at 90ºC
  • Temperature 120ºC
  • Various certifications and approvals, depending on the sector.
€9.67 (tax included)
€7.99 (tax excl.)
DIAMETERS
  • Ø18-Ø15
  • Ø22-Ø15
  • Ø22-Ø18
  • Ø28-Ø18
  • Ø28-Ø22
  • Ø35-Ø22
  • Ø35-Ø28
  • Ø42-Ø28
  • Ø42-Ø35
  • Ø54-Ø28
  • Ø54-Ø35
  • Ø54-Ø42
Reference:
58190070
Description

reduced stainless steel press tea

Product Details
58190070
Comments
12 other products in the same category:
M-H PRESS INOX REDUCTION

€4.13 (tax excl.)
€5.00 (tax included)
An MH press stainless steel reducer is a type of fitting used in piping systems to connect two pipes of different diameters. A larger diameter pipe is always connected to a smaller diameter pipe. Common applications:...
YOU EQUAL PRESS INOX

€7.05 (tax excl.)
€8.53 (tax included)
A stainless steel equal tee allows the flow of a fluid to be divided into two equal branches. The connection to the pipes is made by pressing, ensuring a tight and durable joint. Typical applications: Sanitary...
INOX-316 PIPE

€19.47 (tax excl.)
€23.56 (tax included)
An Inox-316 pipe is a cylindrical conduit made from stainless steel. Its smooth, non-porous surface prevents the accumulation of bacteria and microorganisms. It is a material highly resistant to wear and high...
STAINLESS STEEL FEMALE PRESS ADAPTER

€5.59 (tax excl.)
€6.76 (tax included)
A stainless steel female press adapter is a type of pipe fitting designed to connect a press-fit piping system to another component or system that uses a female threaded connection. Technical sheet: INOX-316 fitting...
FLANGE ADAPTER PN-16 DN-15 PRESS INOX

€33.95 (tax excl.)
€41.08 (tax included)
A PN-16 DN-15 press inox flange adapter allows a stainless steel piping system to be connected using a press joining method to another system that uses a flange connection. Technical sheet: INOX-316 fitting for...
VITON FKM GASKET

€0.95 (tax excl.)
€1.15 (tax included)
The Viton FKM gasket is characterized by its exceptional resistance to high temperatures, a wide variety of chemicals and abrasion. Variety of applications: automotive industry, chemical industry, aerospace, food...
STAINLESS STEEL PRESS MALE THREAD TUBE UNION

€7.05 (tax excl.)
€8.53 (tax included)
A male threaded stainless steel press pipe union allows two or more pipe elements to be connected. The connection to the smooth pipe is made using a radial press system. Applications: Plumbing and heating...
CENTRAL FEMALE TUBE PRESS INOX

€8.12 (tax excl.)
€9.83 (tax included)
A stainless steel press-fit female center pipe tee is distinguished by its female branch connection, unlike the other two ends, which are press-fit. It allows the connection of three pipe sections, with one section...
90º CURVE M-H PRESS INOX

€3.99 (tax excl.)
€4.83 (tax included)
A 90º MH press inox bend is a pipe fitting, especially for installations where high corrosion resistance and a tight seal are required. Its function is to change the direction of fluid flow at a 90º angle....
90º H-H CURVE PRESS INOX

€4.39 (tax excl.)
€5.31 (tax included)
A 90º HH press inox bend is a pipe fitting designed to make a 90º turn in a pipe line. Typical applications: Sanitary installations, Heating systems, Food industry, Chemical industry and Naval sector. Technical sheet:...
90º FEMALE TUBE ELBOW WITH STAINLESS STEEL PRESS FIXING

€8.38 (tax excl.)
€10.14 (tax included)
A 90º female pipe elbow with stainless steel press fitting allows a 90º turn in the piping system and can be anchored to a surface (wall, floor, etc.) to provide stability to the installation. Technical sheet:...
STAINLESS STEEL PRESS MALE ADAPTER

€5.32 (tax excl.)
€6.44 (tax included)
A stainless steel male press adapter is used to connect a pipe system with a press connection to another component or system that uses a male threaded connection. Technical sheet: INOX-316 fitting for pressing....
Recently Viewed
REDUCED TEA PRESS INOX

€9.67 (tax included)
€7.99 (tax excl.)
A stainless steel press reducing tee is used in piping systems that require high corrosion resistance and secure joints, especially in sanitary and industrial applications. Applications: Food industry, Pharmaceutical...
EPDM PRESS FITTING GASKET

€0.21 (tax excl.)
€0.25 (tax included)
An EPDM press-fit gasket is a replacement for stainless steel fittings with a press connection. Its function is to create a durable, airtight seal between the fitting and the pipe, preventing fluid or gas leaks....
SINGLE PHASE ELECTRIC ACTUATOR 12V DC

€200.00 (tax excl.)
€242.00 (tax included)
Single-phase 12V electric actuator used to generate load movement or any action that requires force.  90º rotation design (optionally 180º - 270º) Incorporates thermal temperature control. Electrical torque control....
METRIC CHECK VALVE

€9.17 (tax excl.)
€11.10 (tax included)
A metric check valve is specialized for systems that transport fluids in the food and beverage industry. Applications: Dairy industry, Beverage production, Food processing, Pharmaceutical and biotechnology,...
NBR O-RING

€0.08 (tax excl.)
€0.10 (tax included)
NBR O-ring Most common applications: Hydraulic systems, Internal combustion engines, Chemical industry, Agricultural equipment, Sanitary. Technical data sheet: Made of NBR quality. For sealing between two elements at...
POLYAMIDE FITTING AND

€8.00 (tax excl.)
€9.68 (tax included)
A polyamide Y fitting is a pipe or hose connector that allows three sections of pipe or hose to be joined together, creating a branch or a union where two flows combine into one, or one flow divides into two....

Menu

Please sign in first.

Sign in