Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
CENTRAL FEMALE TUBE PRESS INOX
CENTRAL FEMALE TUBE PRESS INOX
CENTRAL FEMALE TUBE PRESS INOX
CENTRAL FEMALE TUBE PRESS INOX

CENTRAL FEMALE TUBE PRESS INOX

A stainless steel press-fit female center pipe tee is distinguished by its female branch connection, unlike the other two ends, which are press-fit. It allows the connection of three pipe sections, with one section diverted from the main flow.

Applications: plumbing, heating, cooling, compressed air systems, gas, drinking water installations, and fluid treatment in residential, commercial, and industrial sectors.

Technical sheet:

  • INOX-316 fitting for pressing.
  • Available tube diameters 15-18-22-28-35-42-54
  • EPDM gasket available (domestic water, heating, fire protection, compressed air (oil-free)
  • VITON gasket available (oils, hydrocarbons (except diesel), solar installations, compressed air.
  • For DVGW GW 541 UNE-EN-10088 tube
  • Pressure 16 bar at 90ºC
  • Temperature 120ºC
  • Various certifications and approvals, depending on the sector.
€9.83 (tax included)
€8.12 (tax excl.)
Tube diameter - Thread
  • Ø 15-1/2
  • Ø 18-1/2
  • Ø 18-3/4
  • Ø 22-1/2
  • Ø 22-3/4
  • Ø 28-3/4
  • Ø 28-1
  • Ø 35-1
  • Ø 35-1-1/4
Reference:
58170039
Description

female central press stainless steel tube

Product Details
58170039
Comments
12 other products in the same category:
BATTERY-POWERED ELECTRO-HYDRAULIC PRESS

€1,700.00 (tax excl.)
€2,057.00 (tax included)
A battery-powered electro-hydraulic press uses a hydraulic system driven by an electric motor powered by a rechargeable battery to make joints, usually radial or axial, in pipes and fittings. Applications: Plumbing,...
220V ELECTROHYDRAULIC RADIAL PRESS

€1,400.00 (tax excl.)
€1,694.00 (tax included)
A 220V electrohydraulic radial press is used to make radial joints in pipes and fittings. These joints are achieved by circumferentially compressing a sleeve or ring onto the pipe and fitting. Applications: plumbing,...
UNION TUBE FEMALE THREAD SWIVEL PRESS INOX

€9.85 (tax excl.)
€11.92 (tax included)
A press stainless steel swivel female thread pipe union is designed to flexibly and securely connect a pipe with a female thread to another component. It allows for a certain amount of rotation, facilitating the...
STAINLESS STEEL ARCH

€3.00 (tax excl.)
€3.63 (tax included)
A stainless steel eyebolt is a fastening element made of stainless steel. Its purpose is to hold and anchor pipes, tubes, cables, or conduits to structures, profiles, supports, or surfaces. Applications: Industrial...
STAINLESS STEEL FEMALE PRESS ADAPTER

€5.59 (tax excl.)
€6.76 (tax included)
A stainless steel female press adapter is a type of pipe fitting designed to connect a press-fit piping system to another component or system that uses a female threaded connection. Technical sheet: INOX-316 fitting...
STRAIGHT H-H JOINT

€2.98 (tax excl.)
€3.61 (tax included)
A straight HH union is a connector used in piping systems, designed to join two pipes in a straight line using a press connection system. Technical sheet: INOX-316 fitting for pressing. Available tube diameters...
YOU EQUAL PRESS INOX

€7.05 (tax excl.)
€8.53 (tax included)
A stainless steel equal tee allows the flow of a fluid to be divided into two equal branches. The connection to the pipes is made by pressing, ensuring a tight and durable joint. Typical applications: Sanitary...
REDUCED TEA PRESS INOX

€7.99 (tax excl.)
€9.67 (tax included)
A stainless steel press reducing tee is used in piping systems that require high corrosion resistance and secure joints, especially in sanitary and industrial applications. Applications: Food industry, Pharmaceutical...
VITON FKM GASKET

€0.95 (tax excl.)
€1.15 (tax included)
The Viton FKM gasket is characterized by its exceptional resistance to high temperatures, a wide variety of chemicals and abrasion. Variety of applications: automotive industry, chemical industry, aerospace, food...
STAINLESS STEEL PRESS CAP

€4.52 (tax excl.)
€5.47 (tax included)
A stainless steel press plug is used to seal or close the end of a pipe or fitting, made of stainless steel and designed for piping systems that use "push-in" connections. Applications: Food and beverage industry,...
3-PIECE PRESS STAINLESS STEEL FITTING

€14.64 (tax excl.)
€17.71 (tax included)
A 3-piece stainless steel press fitting is used in piping systems that require high corrosion resistance and secure connections, especially in sanitary and industrial applications. It facilitates pipe assembly and...
45º M-H CURVE PRESS INOX

€3.73 (tax excl.)
€4.51 (tax included)
A 45° MH press stainless steel bend is a pipe fitting that allows fluid flow to be changed at a 45° angle. It has a male connection at one end and a female connection at the other, both designed for the press-fit...
Recently Viewed
CENTRAL FEMALE TUBE PRESS INOX

€9.83 (tax included)
€8.12 (tax excl.)
A stainless steel press-fit female center pipe tee is distinguished by its female branch connection, unlike the other two ends, which are press-fit. It allows the connection of three pipe sections, with one section...
FLAT SILENCER

€0.62 (tax excl.)
€0.75 (tax included)
A flat silencer is used to reduce the noise generated by the discharge of compressed air in pneumatic systems, characterized by its low profile or flattened shape. Applications: Compact machinery, Pneumatic control...
BANJO 90º BALL FOR BRAKE PIPE

€4.24 (tax excl.)
€5.13 (tax included)
A 90° banjo fitting for brake lines is a specific type of hydraulic fitting used in vehicle brake systems. Its function is to securely and leak-free connect a brake line or pipe to a brake system component at a 90°...
PNEUMATIC DISPENSER

€4,305.60 (tax excl.)
€5,209.78 (tax included)
The pneumatic dispenser is used to dispense liquid or pasty products using compressed air. The compressed air drives a piston or diaphragm which, in turn, pushes the product through a nozzle. The dosing units are...
BRASS BALL VALVE PN-25 WITH PURGE

€6.56 (tax excl.)
€7.94 (tax included)
The PN-25 brass ball valve with bleed valve incorporates a purge system that allows the fluid contained in the valve or pipe to drain. This facilitates maintenance, cleaning, and freeze prevention. Common...
SUCTION PUMP 12902

€16.80 (tax excl.)
€20.33 (tax included)
A 12902 suction pump is a hand pump for suctioning and transferring fluids from one container to another, or for extracting liquids from systems. It is characterized by its simplicity and versatility in handling...

Menu

Please sign in first.

Sign in